Gigabyte GA-Z87X-UD7 TH User Manual - Page 79
Steps, RAID Level, Stripe Size
View all Gigabyte GA-Z87X-UD7 TH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
To further configure the RAID array, use the up or down arrow key to move the selection bar to select an item in the right block of the screen and press to display options (Figure 4). Set the required items in sequence. Steps: 1. RAID Level: Select a RAID level. 2. Stripe Size: Select the stripe block size. Options include 32 KB and 64 KB. 3. Name: Enter an array name with 1~10 letters (letters cannot be special characters). Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd. Configure -> Select free disksCreate Virtual Disk HBA 0 : Marvell 0 Virtual Disks Free Physical Disks * HDD 0: ST95005620AS * HDD 1: ST95005620AS RAID Level : Max Size (MB) : Stripe Size : Quick Init : Name : Threshold(%) : Next RAID 0 931.3GB 64KB Yes Default 100 Help Virtual disk configurations. ENTER: Select F10: Exit/Save ESC: Return Figure 4 4. Next: After completing the settings above, move to Next and press to begin creating the array. When prompted to confirm whether to create this array, press to confirm or to cancel (Figure 5). Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd. Configure -> Select free disksCreate Virtual Disk HBA 0 : Marvell 0 Virtual Disks Free Physical Disks * HDD 0: ST95005620AS * HDD 1: ST95005620AS Create Virtual Disk RAID Level : Max Size (MB) : Stripe Size : Quick Init : Name : Threshold(%) : Next Do you want to create this virtual disk? Yes No RAID 0 931.3GB 64KB Yes Default 100 Help Virtual disk configurations. ENTER: Select F10: Exit/Save ESC: Return Figure 5 - 79 - Configuring SATA Hard Drive(s)