Graco 8F43PTI3 Owners Manual - Page 41
Additional Information
UPC - 047406102723
View all Graco 8F43PTI3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
8.0 Additional Information 8.1 Airplane Use When installing in an airplane using the base, install the same way as in an automobile with a lap only belt leaving the lock off fully opened to allow for buckle clearance. If using the shell only installing follow the same instructions as an automobile. Notify the airline ahead of time that you intend to bring the seat on board. Use only in forward-facing aircraft seat. Follow the flight attendants instructions about infant restraint placement. Do not use this infant restraint if the airplane seat belt does not hold the infant restraint securely. 8.2 Storing LATCH 1. For ease of storing, extend LATCH to its maximum length. 2. Locate the storage bars on bottom of infant restraint base . 3. Fasten connector (without adjustment belt) onto storage bar. 4. Repeat step 3 for connector with adjustment belt. After fastening onto storage bar, pull on adjustment belt to make sure LATCH is securely fastened. 5. LATCH storage should look like this when complete . Storage bars Underside of base 41