Haier XQB50-20 User Manual - Page 3
Safety precautions
View all Haier XQB50-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Safety precautions Before Using Please plug the plug on special 220V~240 AC receptacle.Be sure to use three phase power receptacle. Ensurethe earthing prong of the power receptacle is earth-ed reliably. Use a leakage protector if possible. In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hang. Be sure to pull the plug off and close the water faucet when occurring power failure, delivering the machine, setting the machine idle or cleaning the machine, Do not plug or pull the power plug with wet hand. Earth Do not bend, stretch, twist, bind the power cord by force, or reform it. Do not press or clamp it with heavy items. If the power cord and power plug are bad, or the receptacle is loose, be sure to have it replaced by the technicians of our special shop or our agent,or the after-sales service department to avoid any risk.Keep the prong of the power plug clean.If dust is found on the power plug, please wipe it off with dry cloth. In case the washing machine is installed on ground Do not use water with temperature higher than 50 with carpet, be careful not to block the ventilation hole with carpet. The ventilation holes at the bottom 50 C Do not put the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the control panel coating. Do not wash waterproof laundry like the raincoat, bikecovers, down textiles etc. To avoid abnormal vibrations in spinning. Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more. 1