Haier XQB50-20 User Manual - Page 9

1 Preparation before washing Using process Preparation before washing 1. Connect the water inlet hose. 2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose. Pay attention to followings before washing the laundries Confirm if there's Clear the pocket. special requirement Take out the coins, for the laundries. sand, hairpins etc. Fasten the buttons The quantity of the When the pulsator is and zippers. laundries shall not running, the buttons of exceed the rated value. the laundries may cause The big laundries like noise. For the sake of the jeans shall be put discretion, please put in loosely. the laundries with buttons into other laundries. a. Check if the laundries are applicable for washing with the machine. b. Divide the laundries with unfast color from other laundries. c. Put those laundries difficult to absorb water into water with hand. d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent in advance, which can make it easier to remove the soil. e. For those laundries that may get lint ball and those with long fur, turn it over before putting in. f. Do not put those laundries polluted by chemicals directly into the washing machine. g. For those small laundries and those may get twisting or worn, and woolen/fur laundries, please put them into mesh bag for washing. 7