Hamilton Beach 70595H Use And Care - Page 11

840170100 Ev03.qxd 7/16/07 10:37 AM Page 11 Cleaning, Storage and Maintenance 1. Wash bowl, lids, blade, discs, removable drive sleeve and food pusher in hot, soapy water. Rinse and dry thoroughly. See page 5 for information on how to remove food chute lid for cleaning. To clean food thoroughly from the bowl and bowl lid/food chute, immerse in hot, soapy water. NOTE: Do not store unit with lid in locked position; this may put strain on interlock tab. 2. Wipe base, control panel, and cord with a damp cloth or sponge. To remove stubborn soil, use a mild non-abrasive cleanser. 3. To store, place bowl on base. Then place Chopping/Mixing Blade on motor shaft and Slicer/Shredder Disc on Chopping/Mixing Blade. The Removable Drive Sleeve may be stored in the bowl. Place lid on bowl but do not lock. 4. Monthly place a drop of vegetable oil on each screw in the food chute. How to Release Suction Cup Feet After Use The suction cup feet on the bottom of your Big Mouth™ Food Processor are designed to keep the unit stationary during use. To maximize the life of your Big Mouth™ please review the following directions: With Big Mouth™ fully assembled: lift it from counter by placing hands under unit as shown and lifting to one side. OR With Big Mouth™ fully assembled: lift it from counter by grabbing the handle as shown and lifting from same side as handle. OR With bowl and lid removed from Big Mouth™: lift it from counter by placing hands under unit as shown and lifting to one side 11