Hannspree HT09 User Manual - Page 40

28US_LCDTV.book Page 40 Thursday, July 3, 2008 5:33 PM English perform this unlock operation, while those electronic equipment modes not so operated still have channel locked up). The indicator light then goes off and setting mode is exited. 4. During the setting process, releasing the electronic equipment button exits the setting mode immediately without changing the status prior to setting. 5. Buttons other than CH+/CH- are not functional during search. Channel buttons include CH+ and CH-. 6.1.6 Factory Setting Mode Factory setting operation procedures are as follows: 1. Press the corresponding electronic equipment button. The indicator light will come on for 200ms and then go off; after 3 seconds, the indicator light will come on again, showing setting mode has been entered. 2. While holding the electronic equipment button, first press < (left arrow), then press OK. The indicator then goes off and setting mode is exited, showing factory setting has been restored. 3. During the setting process, releasing the electronic equipment button exits the setting mode immediately without changing the status prior to setting. 4. Pressing any of the electronic equipment buttons to enter factory setting operation mode. 5. The default current electronic equipment is TV upon first power-on. Electronic equipment Code Note TV 1001 Provided by manufacturer CABLE -- Transmit TV code AUDIO -- Transmit TV code DVD -- Transmit TV code 40