Harman Kardon AVR45 Owners Manual - Page 13
AC-3/PCM Coaxial Input - harman kardon
View all Harman Kardon AVR45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Rear Panel Connections 10 ª Subwoofer Pre-Out: Connect this jack to the line level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input. , Front: Connect these terminals to the front left/right speakers. ⁄ Center: Connect these terminals to the center speaker. l Surround: Connect these terminals to the surround speakers. ‹ Unswitched AC Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR45 is on or off. NOTE: The power consumption of the device plugged into each of these outlets should not exceed 100 watts. › Switched AC Outlet: This outlet may be used to power any device that you wish to have turn on when the unit is turned on with the System Power Control switch 2. fi Power Cable: Connect the AC plug to a non-switched AC wall output fl Video 2 Inputs: Connect these jacks to the audio and video outputs of a TV Tuner, Cable TV converter box, satellite receiver or any other audio/video source. ‡ TV Monitor Video Output: Connect this jack to the standard (composite) video input of a TV monitor or video projector to view the on-screen menus and the output of any standard video source selected by the receiver's video switcher. ° AC-3/PCM Coaxial Input: Connect the coax digital output from a DVD player, HDTV receiver, LV player or CD player to this jack. The signal may be either a Dolby Digital (AC-3) signal or a standard PCM digital source. · AC-3/PCM Optical Input: Connect the optical digital output from a DVD player, HDTV receiver, LV player or CD player to this jack. The signal may be either a Dolby Digital (AC-3) signal or a standard PCM digital source. a Remote IR In: If the AVR45's front panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack. b Remote IR Out: This connection permits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the "IR IN" jack on Harman Kardon or other compatible equipment. c Tape Monitor In: Connect these jacks to the PLAY/OUT jacks of an audio recorder. d Tape Monitor Out: Connect these jacks to the RECORD/INPUT jacks of an audio recorder.