Harman Kardon AVR45 Owners Manual - Page 24
or by pressing
View all Harman Kardon AVR45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
System Configuration 21 3. Press the Set button i ˜. 4. Adjust the delay time by pressing the ⁄/¤ buttons g on the remote or the Selector buttons ¸ on the front panel until the delay time figure calculated using the formula entered above appears in the display. 5. If no adjustment is needed for the center channel delay, press the Set button i ˜ to enter the setting into the AVR45's memory. If the calculations outlined above for the center channel delay require an adjustment, proceed with the following steps: 6. Select a digital input by pressing the Digital button w ˆ. Press the ⁄/¤ buttons g on the remote or the Selector buttons ¸ on the front panel until either COAX or OPTICAL appear in the Main Information Display S . Note that for this adjustment, either input may be selected. 7. Press the Set button i ˜. 8. Select the Dolby Digital mode either by pressing the front panel Dolby Digital Selector ( or by pressing the Surround Mode Selector y on the remote, and then pressing the ⁄/¤ buttons g on the remote until DOLBY AC-3 appears in the Main Information Display S . Ignore any "NO DATA" message that may appear. 9. Press the Delay button v ı on the remote or front panel. The words S DELAY TIME appears in the Main Information Display S . 10. Press the ⁄/¤ buttons g on the remote once, so that C DELAY TIME appears in the Main Information Display S . 11. Press the Set button i ˜. 12. Press the ⁄/¤ buttons g on the remote until the desired delay time for the center channel appears in the display. 13. Press the Set button i ˜ to enter the setting into the AVR45's memory. Congratulations! You have now completed the setup, adjustment and calibration of the AVR45. You are now ready to enjoy the finest in music and home theater listening.