Harman Kardon AVR75 Owners Manual - Page 28

On-Screen Display 26 Surround Mode and Delay When the surround mode is changed or the delay timing is adjusted, a message will appear at the bottom of the video screen (see figure #10). The top line is the surround mode, the bottom line is the delay time for that mode. Input Selection When the source input is changed, this message will appear (see figure #7). The top line is the audio input source, the middle line is the video input source and the bottom line is the digital source in use, if any. Remember, when choosing an input, select the video source first, and then the audio source if a split input/simulcast listening session is desired. Master Volume When the volume is changed, a horizontal scale will briefly appear at the bottom of the screen with the volume level (see figure #8). Mute When the unit is placed in audio mute, the word MUTE will appear in the upper right corner of the screen as a reminder that the volume has been cut (see figure #11) Sleep Timer Function Pressing the Sleep button z displays the SLEEP TIMER menu (see figure #12) which shows if the timer is on and the number of minutes remaining before the unit shuts down. To activate the Sleep Timer function you must go to the Sleep Timer menu that is accessed through the Main menu system (see page 27 for additional information). On-Screen Display Function If you do not wish to have the On-Screen Displays appear, press the OSD button k # twice. A reminder message will appear on the screen for a few seconds (see figure #13), and the displays will then be canceled until they are once again activated. Using The On-Screen Menus for System Control Besides conveying status messages, the On-Screen Display system may also be used as a means of controlling the operation of the unit. To operate the unit through the on-screen menu system, start by pressing Select j on the remote to bring up the Main Menu (see figure #1). Then, use the up/down navigational arrow keys ⁄ and ¤ i to move the cursor to the menu for the operation you wish to control or adjust. Press Select j to choose a menu, and then use the left/right navigational arrow keys ‹ and › i to view the choices in that current option. Finally, when the desired choice appears, press Select j to enter the choice and return to the MAIN MENU. To exit from the Menu Control System, press ¤ i until the on-screen cursor > is pointing to MENU OFF and press Select j. The following functions of the AVR75 may be controlled through the Menu Control System: INPUT SELECTOR: At this menu you may change the audio or video input by using the ⁄ or ¤ buttons i to position the on-screen cursor > next to MUTE Figure 11 SLEEP TIMER ON 90 min Figure 12 ON SCREEN DISPLAY OFF Figure 13 INPUT SELECTOR AUDIO :TUNER REC OUT :TUNER ATT:ON OFF DIGITAL :** VIDEO :DVD TAPE MONITOR :ON OFF RETURN TO MAIN MENU Figure 14