HealthRider H125t Treadmill Uk Manual - Page 6
Assembly - manual
View all HealthRider H125t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, simply wipe it off with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex key and your own Phillips screwdriver wrench , scissors , and needlenose pliers . , adjustable Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid damaging parts, do not use power tools for assembly. Extra hardware may be included. 5/16" Star Washer (11)-4 3/8" Star Washer (13)-8 3/8" Nut (12)-2 #8 x 1/2" Ground Screw (10)-1 #8 x 1/2" Screw (1)-17 #8 x 3/4" Screw (2)-4 3/8" x 3/4" Screw (9)-4 3/8" x 1 1/4" Screw (8)-4 3/8" x 1 3/4" Bolt (6)-1 3/8" x 2" Bolt (3)-1 5/16" x 1 1/4" Screw (4)-4 3/8" x 2 3/4" Screw (7)-4 3/8" x 4 1/2" Screw (5)-4 6