HealthRider H125t Treadmill Uk Manual - Page 9
Hold the Pulse Bar Top 86 near the Pulse Bar
View all HealthRider H125t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Identify the Left and Right Handrails (81, 82). Attach the Handrails to the Pulse Bar Bottom 6 (87) with four 3/8" x 3/4" Screws (9). Start all 9 four Screws, and then tighten them. 87 82 9 81 7. Hold the Pulse Bar Top (86) near the Pulse Bar Bottom (87). Insert the pulse wire from the Pulse 7 Bar Top into the Left Handrail (81) and pull it out of the large hole in the Pulse Bar Bottom. 86 1 Attach the Pulse Bar Top (86) to the Pulse Bar Bottom (87) with seven #8 x 1/2" Screws (1). Be 1 careful not to pinch the pulse wire. Start all seven Screws, and then tighten them. 1 1 87 81 Pulse Wire 1 8. H old the pulse bar assembly near the Left and Right Uprights (88, 89). Insert the pulse wire on 8 the pulse bar assembly through the rectangular hole in the top of the Left Upright and pull it out of the front of the Left Upright. Attach the pulse bar assembly to the Uprights (88, 89) with four 3/8" x 4 1/2" Screws (5) and four 3/8" Star Washers (13); do not fully tighten the Screws yet. Remove the wire tie from the Upright Wire (77). Pulse Bar Assembly Pulse Wire 13 Wire Tie 5 89 77 13 5 88 9