HealthRider H600 Treadmill English Manual - Page 6
Assembly
View all HealthRider H600 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY Star Washer Extension Leg Bolt (96)-4 (84)-2 dAissspoesmebolyf trhEeeqxptueainrceskisionntgwLmoeagpteeBrroisalotls(n9us6n.)tS-il 4eatsstheemtbrelyaidsmcWiollmhinepelael tNceluedt.aN(r1eo3dt)ea-:r2eTaheanudndreemrsoidveeoafllthpeactrkeinagdmmialltweraialklsin.gDboenltoits coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex key and your own phillips screwdriver shaft at least 15 cm [6 in.] long) and wire cutters . (with a Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled. Extension Leg Nut (67)-4 Star Washer (8)-8 1" Tek Screw (83)-4 3/4" Screw (3)-2 Console Bolt (64)-4 Extension Leg Bolt (65)-4 1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side as shown. Partially fold the Frame (58) so the treadmill is more stable. Do not fully fold the treadmill until it is completely assembled. Insert an Extension Leg (89) into the base of the Uprights (84) as shown. Next, hold two Extension Leg Nuts (67) in the bottom of the Extension Leg. Then, insert two Extension Leg Bolts (65) with Star Washers (8) into the top of the Extension Leg, and firmly tighten the Extension Leg Bolts into the Extension Leg Nuts. With the help of a second person, carefully tip the treadmill onto its other side. Attach the other Extension Leg (not shown) as described above. Attach four Base Pads (82) (only two are shown) to the base of the Uprights (84) with four 1" Tek Screws (83). 1 65 8 84 82 67 89 58 82 83 6