HP 3PAR StoreServ 7400 2-node HP 3PAR Management Console 4.3.1 User's - Page 38
Detail Pane, Fibre Channel Summary Tab, Physical Disks Tab SFP Tab
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Column Connected Device Mode Change Partner Partner WWN Failover State Description Name of device that the port is connected to, e.g. host1, cage0. Indicates whether port mode change from initiator to target or vice versa is Allowed or Prohibited. This setting is configured using the HP 3PAR CLI command controlport. The partner port. The WWN of the partner port. Indicates if the system is in a failover state. When Settings is selected, the following information is displayed: Column Position Connection Mode Connection Type Configured Rate (Gbps) Max Rate (Gbps) Class2 VCN Unique Node WWN Interrupt Coalesce Description The port location in Node:Slot:Port format. The type of port connection. Disk, Host, Peer, or RCFC. Type of connection (Private Loop, Public Loop, or Point-Point). Data transfer rate setting in Gbps (for example, 1 Gbps). Auto indicates that the system automatically selects the rate. Maximum rate of connection from the port, in Gbps. Indicates whether Class2 service is enabled or disabled. For fabric attached ports, indicates the VLUN change notification setting. When set to Enabled, notices are generated and sent to the fabric controller. When set to Disabled, no notification is sent. Indicates whether Unique Node WWN is enabled or disabled. If Disabled, each I/O generates a separate interrupt to the HBA port driver rather than generating one interrupt for multiple I/O completion. Not available for systems running HP 3PAR OS 2.2.4 or lower. Detail Pane The detail pane provides detail information about a selected fibre channel port from the list pane. If the Fibre Channel port is connected to disks, information is presented on a Summary tab, a Physical Disks tab, and an SFP tab. If the Fibre Channel port is connected to hosts, information is presented on a Summary tab, a Hosts tab, and an SFP tab. Each are discussed in detail in the following sections: "Fibre Channel Summary Tab" (page 38) "Physical Disks Tab" (page 40) "SFP Tab" (page 44) "Hosts Tab" (page 41) Fibre Channel Summary Tab The fibre channel summary is displayed on the Summary tab. The following information is provided: Group General Field Position Label Port WWN Description The port location in Node:Slot:Port format. The designated port label. Port World Wide Name. 38 Managing Ports