HP 3PAR StoreServ 7400 2-node HP 3PAR Management Console 4.3.1 User's - Page 50

The SAS screen can be filtered by Summary and Settings information. "Summary Information" (page 50) "Settings Information" (page 52) Summary Information The SAS summary screen is divided into a list pane and a detail pane. The list pane displays a summary of all SASs in the system. The detail pane displays detailed information about a single SAS selected from the list pane. The list pane provides the following information: Column Position WWN State Mode Topology Rate Connected Device Type Connected Device Mode Change Description The position of the port (in node:slot:port format) in which the SAS is installed. The World Wide Name of the server attached storage. The current state of the SAS. Port firmware mode setting-Initiator, Target, Peer, or Suspended. Ports in Initiator mode are connected to drive cages and ports in Target mode export to hosts. Suspended mode is for target ports that have not yet been initialized by the system (rare). Peer mode is for Ethernet ports. Type of connection (Private Loop, Public Loop, or Point-Point). Rate that data can be transferred over the port (1 Gbps, 2 Gbps or 4 Gbps). When there is no specified value, no connection exists. Type of device that the port is connected to. Free, Disk, Host, Peer, RC, or InServ. Name of device that the port is connected to, e.g. host1, cage0. Indicates whether port mode change from initiator to target or vice versa is Allowed or Pra ohibited. 50 Managing Ports