HP 3PAR StoreServ 7450 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 474
showsnmppw, The following example displays all SNMP passwords
View all HP 3PAR StoreServ 7450 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 474 highlights
showsnmppw DESCRIPTION The showsnmppw command displays the SNMP community string passwords. WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX showsnmppw [options] AUTHORITY Any role in the system. OPTIONS -rw|-r|-w Specifies that the read-write (-rw), read-only (-r), or write-only (-w) password is displayed. If not specified, the read/write community string password is displayed. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example displays all SNMP passwords: cli% showsnmppw [password] EXIT STATUS The following codes are returned indicating success or failure: • 0 indicates that the command was successful. • 1 indicates that the command failed. NOTES SNMP passwords are registered using the setsnmppw command. See "setsnmppw" (page 326) for more information. 474 Show Commands