HP 3PAR StoreServ 7450 2-node HP 3PAR StoreServ 7450 Storage Installation Guid
HP 3PAR StoreServ 7450 2-node Manual
 |
View all HP 3PAR StoreServ 7450 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 3PAR StoreServ 7450 2-node manual content summary:
- HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 1
HP 3PAR StoreServ 7450 Storage nl Installation Guide Abstract This guide is designed to instruct qualified technicians who are authorized to install the HP 3PAR StoreServ 7450 Storage system and associated hardware components. HP Part Number: QR482-96437 Published: August 2013 Edition: 1 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 3
Inspecting the Packaging...7 Redeeming and Registering HP 3PAR Licenses 8 Storage System Installation...8 Storage System the Service Processor in the Storage System 27 5 Cabling the Storage System 34 Cabling Controller Nodes...34 Host/Ethernet Cables...34 Cabling the Service Processor - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 4
...73 9 Support and Other Resources 74 Contacting HP...74 HP 3PAR documentation...74 Typographic conventions...77 HP 3PAR branding information 77 10 Documentation feedback 78 A HP 3PAR StoreServ 7450 (Controller and Storage) and M6700 Series (Storage) Contents List 79 HP 3PAR StoreServ 7450 and - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 5
HP 3PAR Storage Software When HP 3PAR SmartStart is Unavailable 92 Launching the SP Setup Wizard 92 Launching the Storage System Setup Wizard 92 Installing the Management Console When HP 3PAR SmartStart is Unavailable 92 E Validating Remote Support 93 F Troubleshooting 95 Troubleshooting - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 6
If you need assistance with the installation, contact HP Support or visit http://www.hp.com/support. Tools The following tools are not required , data loss, and damage, observe these general precautions when installing or servicing the storage system: • Using improper tools can result in damage to - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 7
service tools. Racks Ensure that precautions have been taken to ensure rack stability and safety. Observe all cautions and warnings included in the installation instructions on the equipment. Ensure that the equipment is properly supported and braced when installing options and boards. • Be - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 8
"Installing Storage System Components into a Rack" (page 19). See the HP 3PAR StoreServ 7450 Storage Site Planning Manual for configuration specifications and installation requirements. For information about supported hardware and software platforms, visit the Single Point of Connectivity Knowledge - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 9
10) shows and applies only to the 4U24 drive enclosure. • The HP 3PAR StoreServ 7450 controller enclosures hold up to 24, 2.5-inch SFF SAS hard drives, arranged enclosures. The maximum number of supported drive enclosures varies based on the model and the number of nodes. Hard drives are mounted on - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 10
HP 3PAR StoreServ 7450 Storage system can contains two nodes or four nodes: node 0 and node 1 in the lower controller enclosure, and node 2 and node 3 in the upper controller enclosure in a system with four nodes. Figure 3 HP 3PAR StoreServ 7450 Two Controller Nodes Figure 4 HP 3PAR StoreServ 7450 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 11
and Ports Table 1 (page 11) describes default configurations for the HP 3PAR StoreServ 7450 Storage system: Table 1 Storage System Expansion Cards Expansion cards 2 FC HBAs only 2 10 Gb/s converged network adapter (CNA) only 2 FC HBAs + 2 10 Gb/s CNAs Nodes 0 and 1 1 FC HBA each 1 10 Gb/s CNA each - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 12
the drive enclosures and does not include a battery. • The 764 W is used in the node enclosures and includes a replaceable battery. The PCMs are located at the rear of the storage system . Figure 8 PCM Numbering for HP 3PAR 7450 Controller Node Enclosures 12 Identifying Storage System Components - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 13
13) and Figure 11 (page 13)). Figure 10 PCM Numbering for HP M6710 Figure 11 PCM Numbering for HP M6720 Service Processor The HP 3PAR StoreServ 7450 Storage system can include an HP 3PAR Service Processor (SP) or a Virtual Service Processor (VSP). If your configuration includes an SP, it is located - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 14
rack, numbered 0-1 from bottom to top. The default configuration for the HP Intelligent Series Racks is two PDUs mounted vertically at the bottom of enough clearance for service. For example, the PDUs mounted vertically at the back of a rack must have enough clearance to remove node and drive - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 15
cardboard shipping container. CAUTION: To avoid tipping the rack, one person must guide the cabinet down the ramp, with the other person pushing from behind. To the cutouts in the tiles. See the HP 3PAR StoreServ 7450 Storage Site Planning Manual for more information on the structural considerations - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 16
7450 four controller nodes system, two cable management brackets have Velcro straps to hold the cables. You can remove and discard these brackets, but HP recommends restraint shipping brackets support the connected data cables and connectors during transport. HP recommends installing the brackets - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 17
(see Figure 15 (page 17)). NOTE: Make sure the brackets are aligned and leveled with the link connectors before tightening the captive screws. HP recommends tightening the screws to 19 in-lbs. Figure 15 Tightening the Captive Screws Installing and Removing the Cable Restraint Shipping Brackets 17 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 18
Removing the Brackets Remove the cable restraint shipping brackets only when the cabinet is in its final location. 1. Remove the data cables from the hook and loop straps. 2. Loosen the captive screws (see Figure 16 (page 18). Figure 16 Loosening the Captive Screws 3. Remove the brackets. Be careful - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 19
system components in an existing rack. Before you set up a storage system, ensure that all requirements documented in the HP 3PAR StoreServ 7450 Storage Site Planning Manual have been met. Follow these procedures if you are installing any of the following storage system components in an existing or - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 20
Mounting a 2U rail shelf onto the rack 1. Determine the location of the directional-specific rail matches with the side of a rack post. The following text is imprinted on both ends of the rails: FRONT-R and FRONT-L. 2. Align one end of the rail channel with the holes of the rack post, and then push - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 21
bracket holes with the top holes of the rail(s). The orientation of the middle support bracket is neutral. b. Insert and tighten screws. Figure 18 Installing the Middle Support Bracket 6. Repeat steps 1 through 5 for the other rail. 7. Snap one cage nut into the rack hole two positions above the - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 22
or upgrading PCle adapters involves adding additional supported types of adapters or replacing existing adapters. WARNING! FC HBA and iSCSI CNA upgrades on the HP 3PAR StoreServ 7450 four controller node system must be serviced by authorized service personnel and cannot be done by a customer - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 23
the enclosure is oriented correctly by looking at the rear of the enclosure. Verify the node numbering by reviewing the controller node label on both edges of the enclosure slot. Figure 20 Verify Controller Node Numbering 2. At the front of the enclosure, remove the yellow bezels on each side of - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 24
for Allocating and Loading Order (2.5 inch SFF hard drive) For a node or M6710 Drive Enclosure, the hard drives must be added in identical drives added to each LFF chassis. The minimum supported upgrade for a 7450 with one or more expansion HP M6720 Drive Enclosures is two identical drives added to - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 25
hard drives) In a storage system with mixed HP M6710 and M6720 drive enclosures, there is a sections above for SFF and LFF drives. WARNING! If the StoreServ is enabled with the Data-at-Rest (DAR) encryption this procedure, review how to load the drives based on drive type, speed, and capacity. See - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 26
Figure 24 Installing a 2.5 inch Hard Drive Installing a 3.5 inch Hard Drive (LFF) 1. Press the handle latch to open the handle. 2. Position the hard drive so the handle opens from the left, and slide it into the enclosure. 3. Push firmly until the handle fully engages and clicks. Figure 25 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 27
enter SP0001614983. Use these procedures when installing an HP 3PAR Service Processor in an existing rack. Before you begin, verify that you have the proper service processor 1U Mounting Kit (PN 683811-001). The service processor rail kit supports a variety of products in round, square, or threaded - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 28
Figure 26 Rail Kit Components In addition to the supplied items, you may also need the following: • Screws fitting a threaded-hole rack • Screwdriver • Optional cable management arm (see Figure 27 (page 29)) 28 Installing Storage System Components into a Rack - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 29
plan the rack layout before installing the equipment. See HP 3PAR StoreServ 7000/7450 Cabling Configuration Guide for the best practices for node and drive enclosure positioning in specific configurations. To install the rail kit and service processor: 1. Adjust the length of the mounting rails - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 30
Figure 28 Installing Cage Nuts and Rail Mounting Pins 3. Align the mounting rail with the cage nuts, and fasten the mounting rails to the rack with the proper screws. 30 Installing Storage System Components into a Rack - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 31
the risk of injury or equipment damage, inspect the rack to ensure that it is adequately stabilized before installing the service processor. 5. Install the side rails on each side of the service processor by aligning each side rail to the component, and then snapping it into place. Installing the - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 32
processor onto the mounting rails and into the rack. Figure 31 Sliding the Service Processor into the Rack 7. Fasten the service processor to the rack. 8. (Optional) Install the cable management arm. See the instructions provided in the kit. 32 Installing Storage System Components into a Rack - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 33
the plug, electrical outlet, and the point where the cord extends from the component. Continue on to "Cabling the Storage System" (page 34). Installing the Service Processor in the Storage System 33 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 34
system, visit www.hp.com/go/3par. Scroll to Support, and click HP 3PAR StoreServ 7000/7450 Support and then Manuals. Then scroll to Setup and install - general and select the specific HP 3PAR StoreServ 7000/7450 Storage Cabling Configuration Guide. Cabling Controller Nodes Nodes are numbered 0 to - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 35
node. HP recommends separate connections from each host computer to each of the controller nodes in the storage system, with connections distributed evenly across all nodes. Table 6 (page 35) describes the maximum supported Fibre Channel cable length based power on the service processor. The - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 36
cords to a power strip or PDU. Ensure the routed cords maintain proper service clearance. 3. Insert each end of the power cord into the power strip/ outlet based on the type of cord and power requirements to supply power to the storage system. To access the vertically mounted PDUs or servicing area - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 37
storage system does not exceed the ratings of the power sources and PDUs, and adheres to the guidelines described in HP 3PAR StoreServ 7450 Storage Site Planning Manual. Power Cord Connections Each storage system arrives with all internal power cords configured and connected. Before powering on the - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 38
the power strips to the ON position. NOTE: Some power strips may not have power switches. 3. Power on the service processor. 4. Power on the drive enclosure PCMs. 5. Power on the node enclosure PCMs. 6. After approximately 10 minutes, allowing time for the system to boot and the cache batteries to - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 39
and hard drive LEDs are illuminating green. NOTE: If any module fault or hard drive LEDs are not green, do not proceed until the problem is resolved. Figure 35 Bezel LEDs Table 7 Identifying Bezel LEDs Item 1 2 3 Description Power indicator Module fault Hard drive status Verifying LED Status 39 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 40
Figure 36 Hard Drive LEDs Table 8 Identifying Hard Drive LEDs Item 1 2 Description Amber LED indicates a fault. Green LED indicates the system is ready. 40 Verifying Setup and Powering On the Storage System - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 41
LEDs should be blinking green once per second. The green LED of each node will blink together when the storage cluster is properly formed. Figure 37 Node Enclosure PCM LEDs Figure 38 Controller Node LEDs NOTE: The batteries are fully charged during shipment. The batteries may loose some charge and - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 42
interconnect ports are used only with the 7450 four controller nodes system. Figure 39 7450 Four Controller Node LEDs Table 9 Node Interconnect Ports LEDs Item Description 1 Green LED 2 Amber LED Solid (not flashing) green LEDs indicate normal operation. Flashing amber LEDs can be caused - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 43
Drive Enclosure LEDs Figure 40 Drive Enclosure PCM LEDs CAUTION: Do not proceed without first correcting all fault indications (except for PCM batteries). The cluster is not formed until the storage system software installation has been performed. Verifying LED Status 43 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 44
Identifying Service Processor LEDs The HP 3PAR SP (Proliant DL320e) LEDs are located at the front and rear of the SP. Figure 41 Front Panel LEDs Table 10 Front panel LEDs Item - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 45
Green NOTE: May not be applicable to Off your system (for hot-plug HP CS power supplies ONLY) Description Link No link Activity No activity Active System Indicator Status in the HP 3PAR StoreServ 7450 Storage Service Guide. Continue on to "Initializing the Service Processor" (page 46). Verifying - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 46
. • Verify the HP 3PAR Virtual Service Processor software DVD is available. If you cannot locate the DVD, contact HP Support through http://www.hp.com/support, or call your HP Sales Representative at 1-800-334-5144 and request assistance with the HP 3PAR StoreServ 7450 Storage product. WARNING - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 47
on to "Setting Up the Service Processor and Storage System" (page 51) to set up the VSP with SmartStart over the public network. If you are not using SmartStart, see "Installing HP 3PAR Storage Software When HP 3PAR SmartStart is Unavailable" (page 92) to manually launch the setup wizards. Option - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 48
When HP 3PAR SmartStart is Unavailable" (page 92). NOTE: This network configuration is temporary. If the VSP is rebooted, you will need to repeat this procedure before continuing to the Service Processor configuration. Connecting to a Physical Service Processor Use the following instructions to - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 49
https://192.168.0.100/sp/SetIpAddress.html. 5. Log in with the user ID setupusr and no password. The Service Processor IP Setup wizard is displayed. NOTE: The Service Processor Setup Wizard may not display correctly when using Microsoft Internet Explorer 10 with default security settings. If the - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 50
the laptop. 10. Disconnect the network cable from the laptop, and connect the SP to the customer LAN. 11. Continue on to"Setting Up the Service Processor and Storage System" (page 51) and set up the SP with SmartStart over the public network. If you are not using SmartStart, see "Installing - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 51
HP 3PAR Service Processor StoreServ serial number NOTE: The StoreServ 7-digit serial number is located on the back of your HP 3PAR storage system next to the power switch for the node Remote Support (if applicable): Protocol Address and port Authentication information (optional) System Support - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 52
manually the 3parcust to access Service Processor Onsite Customer Care HP 3PAR storage system next to the power switch for the node enclosure PCM, and it begins with16 (for example, 1624635). StoreServ better screen resolution SmartStart Online Help is supported in the following browser versions: • - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 53
processes: • Customizing the communication settings of the SP with the HP 3PAR Service Processor Setup Wizard • Setting up the storage system with HP 3PAR Storage System Setup Wizard You only need to set up the SP and StoreServ system only once for each new storage system. Before inserting the - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 54
set up the SP. Follow the instructions on each screen, and then click Next. The setup takes about 15 minutes. You must have the following information: • StoreServ 7-digit serial number • SP network configuration: ◦ The name to be assigned to the Service Processor ◦ IP address (IPv4 only) ◦ Subnet - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 55
node enclosure PCM, and it begins with 16 (for example, 1624635). NOTE: During the SP Setup process, the StoreServ must be powered on, connected to the same network subnet as the SP, and non-initialized to allow the SP to verify the StoreServ serial number. Launching the HP 3PAR Service Processor - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 56
the completed installation checklist from HP 3PAR StoreServ 7450 Site Planning Manual as reference. NOTE: For additional information and help, use the HP 3PAR SmartStart online help (accessible by pressing F1). 1. Enter the SP information for the following fields: • Service Processor hostname • IP - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 57
troubleshooting and issue resolution Remote Support sends diagnostic information, such as system health statistics, configuration data, performance data, and system events, to HP 3PAR Central. These diagnostics are required for HP to perform fault detection and analysis on your HP 3PAR StoreServ - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 58
3PAR support portal IP address Outbound connectivity (Secure Service Collector Server) Inbound Connectivity (Global Access Server) Secure Network Mode Your DNS server should allow remote3par.houston.hp events on the StoreServ Storage system. To enable a proxy server for remote support: 1. Enter - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 59
wizard enables Remote Support upon completion. Figure 50 Remote Support Page System Support Information To receive remote technical support: 1. Enter the Phone number • Fax number • Email address for service alert notification 3. Click Next. Launching the HP 3PAR Service Processor Setup Wizard 59 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 60
Figure 51 System Support Information Page Time and Region On the Time and Region page, the Manual option is selected and automatically populated with the current host Web browser and Pacific) and the city or country closest to you. Click Next. 60 Setting Up the Service Processor and Storage System - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 61
, log into SPOCC. If you lose all your SP passwords and are unable to log into SPOCC, you must re-image the SP. Launching the HP 3PAR Service Processor Setup Wizard 61 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 62
Figure 53 Change Passwords Page 62 Setting Up the Service Processor and Storage System - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 63
status. The arrows indicate the operation is in progress, and the check marks indicate the operation is complete. Click OK to finish setting up the Service Processor. Launching the HP 3PAR Service Processor Setup Wizard 63 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 64
Figure 55 Apply Settings Finish The Finish page describes the status of the SP setup. Click Finish. Figure 56 SP Setup Finish Page 64 Setting Up the Service Processor and Storage System - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 65
Launching the HP 3PAR Storage System Setup Wizard The setup wizard proceeds through the following steps: • Welcome • Enter Storage System • Verify Storage settings. If the wizard continues to display incorrectly, try refreshing the browser page. Launching the HP 3PAR Storage System Setup Wizard 65 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 66
and set up the SP. Follow the instructions on each page, and then click Next. You must have the following information before you proceed: • The 7-digit HP 3PAR storage system serial number • Storage system enter the storage system serial number. 66 Setting Up the Service Processor and Storage System - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 67
Serial Number Page NOTE: The following illustration points to the location of the serial number which is situated on the side of the right rear node enclosure PCM and adjacent to the power switch. The serial number begins with 16 (for example, serial number: 1624635). Figure 60 Serial Number Label - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 68
the Configure Networking page, complete the required fields and click Next. • Storage System Name • IPv4 Configuration ◦ IPv4 Address ◦ Subnet Mask ◦ Gateway 68 Setting Up the Service Processor and Storage System - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 69
if you want to manually enter the date and time. If you select Automatic, complete the NTP Server field and click Test to get the specified NTP time. In the Time Zone section, select the appropriate region. Click Next. Figure 63 Configure Time Page Launching the HP 3PAR Storage System Setup Wizard - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 70
Change Password This login profile is used to add this storage system to the Service Processor and for initial administrative access to the storage system. When updating of password between 6-8 characters in length. Figure 64 Change Password Page 70 Setting Up the Service Processor and Storage System - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 71
the operation is complete. NOTE: Depending on the type of system configuration, the operation may take to 30 minutes or longer to complete. Launching the HP 3PAR Storage System Setup Wizard 71 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 72
Figure 66 Progress Page Results The Results page confirms the storage system is ready to use. Click Finish. Figure 67 Results Page 72 Setting Up the Service Processor and Storage System - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 73
HP 3PAR Service Processor Onsite Customer Care User's Guide. • Configuring Hosts and creating Virtual Volumes with HP 3PAR SmartStart For more information, see HP 3PAR StoreServ 7000 Storage SmartStart Software User's Guide. • Creating LUNs and using the StoreServ For more information, see HP 3PAR - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 74
of support you are requesting: HP 3PAR storage system HP 3PAR StoreServ 7200, 7400, and 7450 Storage systems HP 3PAR StoreServ 10000 Storage systems HP 3PAR T-Class storage systems HP 3PAR F-Class storage systems Support request StoreServ 7000 Storage 3PAR or 3PAR Storage HP 3PAR documentation - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 75
, and detailed alert information HP 3PAR F-Class, T-Class, and StoreServ 10000 Storage Troubleshooting Guide Installing, configuring, and maintaining the HP 3PAR Policy HP 3PAR Policy Server Installation and Setup Guide Server HP 3PAR Policy Server Administration Guide HP 3PAR documentation 75 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 76
3PAR StoreServ 7000 Storage Service Guide HP 3PAR StoreServ 7450 Storage Service Guide Troubleshooting 7200, 7400, and 7450 storage systems HP 3PAR StoreServ 7000 Storage Troubleshooting Guide HP 3PAR StoreServ 7450 Storage Troubleshooting Guide Maintaining the Service Processor HP 3PAR Service - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 77
followed as directed in order to achieve a functional and supported implementation based on testing at HP. HP 3PAR branding information • The server previously referred to as the "InServ" is now referred to as the "HP 3PAR StoreServ Storage system." • The operating system previously referred to as - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 78
documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback ([email protected]). Include the document title and part number, version number, or the URL when submitting your feedback. 78 Documentation feedback - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 79
may vary, depending on system configuration: • Appearance of components • Quantity of components • Whether or not the component is included with the system HP 3PAR StoreServ 7450 and M6700 Components Figure 68 2U Enclosure Figure 69 4U Enclosure HP 3PAR StoreServ 7450 and M6700 Components 79 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 80
Figure 70 7450 Series Controller Figure 71 M6700 Series I/O Module Figure 72 7450 Series PCM 80 HP 3PAR StoreServ 7450 (Controller and Storage) and M6700 Series (Storage) Contents List - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 81
Figure 73 M6700 Series PCM Figure 74 SFF Drive Assembly Blank Figure 75 SFF Drive Assembly HP 3PAR StoreServ 7450 and M6700 Components 81 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 82
Figure 76 LFF Drive Assembly Blank Figure 77 LFF Drive Assembly Figure 78 7450 Series Battery (Installed in 7450 Series PCM) 82 HP 3PAR StoreServ 7450 (Controller and Storage) and M6700 Series (Storage) Contents List - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 83
cable • Enclosure rack mounting fasteners • Software kits • Entitlement certificate • Node CSR and HBA CSU limitations • 1U filler panels • Link cables • Shipping bracket kit Service Processor Field Replaceable Unit (FRU) Figure 79 Service Processor DL320e Rail Kits The following items are included - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 84
) Figure 81 Right and Left 4U Rail Subassembly (Right Subassembly Shown) Figure 82 M5 Shoulder Screw for Rack Mount Figure 83 M5 Screw for Middle Support Bracket 84 HP 3PAR StoreServ 7450 (Controller and Storage) and M6700 Series (Storage) Contents List - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 85
Figure 84 Middle Support Bracket Figure 85 M5 Cage Nut Rail Kits 85 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 86
about enabling the feature, see the HP 3PAR Management Console User's Guide . CAUTION: HP recommends retaining all acquired software product licenses for reference and maintenance purposes. For assistance with licensing, contact HP Support or visit www.hp.com/ software/licensing. 86 Enhancing - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 87
Hard Drives and Expansion Drive Enclosures HP 3PAR StoreServ 7450 products include 3PAR licensing that enables all functionality associated Limits The SSDs in the node enclosure are connected internally through DP-1. The 7450 two controller node enclosure can support up to five drive enclosures, - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 88
service life of an HP 3PAR StoreServ under the great majority of configurations, IO patterns, and workloads. HP 3PAR StoreServ not be repaired or replaced under HP support contracts. • The first expansion drive enclosure with the same number of drives as the node enclosure. • The drives must be identical - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 89
Adding Hard Drives There are five processes for adding hard drives: • Checking initial status • Inserting hard drives • Checking status • Checking progress • Completing the upgrade Checking Initial Status Under Systems, select Physical Disks, and in the right pane, select the Physical Disks tab. - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 90
Figure 89 New State of Inserted Hard Drive Within 6 minutes (depending on the system load and the size of the upgrade), the State of the new hard drives changes to Normal, and the system starts to initialize the chunklets to ready for use. Output indicates that each of the six added hard drives - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 91
the power switch to ON. 4. After you have completed the physical installation of the enclosures and hard drives, cable the drive enclosure to the controller nodes. 5. Verify the upgrade is successful. Adding Expansion Drive Enclosures 91 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 92
D Installing HP 3PAR Storage Software When HP 3PAR SmartStart is Unavailable Use the following instructions to manually launch the setup wizards to configure the SP and StoreServ from a browser if you are not using HP 3PAR SmartStart or SmartStart is unavailable. Review the prerequisites and - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 93
to log on to SPOCC. Figure 92 SPOCC Support Page 2. Click SPmaint. 3. Click Network Configuration. Figure 93 SPOCC Network Configuration Page 4. Click Test 3PAR Secure Service Collector Server. 5. Verify the SPOCC displays Connectivity test to HP 3PAR Secure Service Collector Server successful. 93 - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 94
and should display the date, time, and filename of the most recent file to start uploading. If this queue becomes long, the Service Processor is encountering transfer issues. To remedy the situation, contact HP support. The SP File Transfer Monitor refreshes every 15 seconds. 94 Validating Remote - HP 3PAR StoreServ 7450 2-node | HP 3PAR StoreServ 7450 Storage Installation Guid - Page 95
(enter the URL https:///sp/ SpSetupWizard.html). 2. Proceed through the Service Processor Setup wizard, enter your Service Processor settings again. (The Service Processor ID is already set; you do not need to reset the ID.) Troubleshooting Duplicate IP Address Issues 95
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
 |
 |
HP 3PAR StoreServ 7450 Storage
nl
Installation Guide
Abstract
This guide is designed to instruct qualified technicians who are authorized to install the HP 3PAR StoreServ 7450 Storage
system and associated hardware components.
HP Part Number: QR482-96437
Published: August 2013
Edition: 1