HP 3PAR StoreServ 7450 2-node HP 3PAR StoreServ 7450 Storage Installation Guid - Page 92
D Installing HP 3PAR Storage Software When HP 3PAR SmartStart is Unavailable
View all HP 3PAR StoreServ 7450 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
D Installing HP 3PAR Storage Software When HP 3PAR SmartStart is Unavailable Use the following instructions to manually launch the setup wizards to configure the SP and StoreServ from a browser if you are not using HP 3PAR SmartStart or SmartStart is unavailable. Review the prerequisites and information about storage and system components before proceeding. Prerequisites Verify the following preliminary tasks are completed: • Cabling must be completed, and the storage system LEDs indicate that cables are properly installed and the storage system is operating normally. • The HP 3PAR Service Processor is on the same network as the storage system. • Either the HP 3PAR Service Processor is powered on, or the virtual Service Processor is deployed and powered on. • The StoreServ must be connected to the same subnet of the SP, powered on, and in a non-initialized state for the setup process to verify the StoreServ. Launching the SP Setup Wizard To launch the SP setup wizard: 1. Launch a web browser. 2. Enter the SP URL address. For example: https://10.0.120.227/sp/SpSetupWizard.html. 3. In the User Name text box, type setupusr and leave the password blank. You can change the password in the SP Setup wizard. 4. Continue on to the following steps to complete the setup. See "Welcome Page" (page 54). Launching the Storage System Setup Wizard To launch the storage system setup wizard: 1. Launch a web browser. 2. Enter the SP URL address. For example: https://10.0.120.227/sp/StorageSystemSetupWizard.html. 3. In the User Name text box, type setupusr and enter the password previously set during the SP setup. 4. Continue on to the following steps to complete the setup. See "Welcome" (page 66). Installing the Management Console When HP 3PAR SmartStart is Unavailable 1. Insert the Management Console DVD. 2. Follow the setup instructions. If you encounter issues, view the Management Console Readme document. NOTE: To log into your storage system using the Management Console, enter username 3paradm and the 3paradm password used during set up with the Storage System Setup wizard. 92 Installing HP 3PAR Storage Software When HP 3PAR SmartStart is Unavailable