HP 3PAR StoreServ 7450 2-node HP 3PAR StoreServ 7450 Storage Installation Guid - Page 21
Installing the Middle Support Bracket, Installing the Cage Nut
View all HP 3PAR StoreServ 7450 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
5. Install the middle support bracket before transporting: a. Align the middle support bracket holes with the top holes of the rail(s). The orientation of the middle support bracket is neutral. b. Insert and tighten screws. Figure 18 Installing the Middle Support Bracket 6. Repeat steps 1 through 5 for the other rail. 7. Snap one cage nut into the rack hole two positions above the rail on both sides. Figure 19 Installing the Cage Nut 8. Check both sides at the front and back of the rack to ensure all screws are installed properly. Installing the Rail Kit 21
5.
Install the middle support bracket before transporting:
a.
Align the middle support bracket holes with the top holes of the rail(s). The orientation of
the middle support bracket is neutral.
b.
Insert and tighten screws.
Figure 18 Installing the Middle Support Bracket
6.
Repeat steps 1 through 5 for the other rail.
7.
Snap one cage nut into the rack hole two positions above the rail on both sides.
Figure 19 Installing the Cage Nut
8.
Check both sides at the front and back of the rack to ensure all screws are installed properly.
Installing the Rail Kit
21