HP 6310 Setup Guide - Page 9
B: Ethernet wired network
 |
UPC - 882780472747
View all HP 6310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Section B: Ethernet (wired) network B1 Connect the Ethernet cable a Remove the yellow plug from the back of the device. b Connect one end of the Ethernet cable to the Ethernet port on the back of the device. c Connect the other end of the Ethernet cable to the hub/ router/switch. If the cable is not long enough, you can purchase a longer cable. IMPORTANT: Do not connect the Ethernet cable to a cable modem. You must have a working network. If you already connected the USB cable, do not connect the Ethernet cable. B2 Choose the correct CD Windows Users: a Insert the green HP All-in-One Windows CD. Mac Users: a Insert the gray HP All-in-One Mac CD. HP All-in-One • 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
HP All-in-One • 9
B1
B2
a
Remove the yellow plug from the back of the device.
b
Connect one end of the Ethernet cable to the Ethernet port
on the back of the device.
c
Connect the other end of the Ethernet cable to the hub/
router/switch. If the cable is not long enough, you can
purchase a longer cable.
IMPORTANT:
Do not connect the Ethernet cable to a cable
modem. You must have a working network. If you already
connected the USB cable, do not connect the Ethernet cable.
Connect the Ethernet cable
Choose the correct CD
Windows Users:
Mac Users:
a
Insert the
green
HP All-in-One Windows CD.
a
Insert the
gray
HP All-in-One Mac CD.
Section B: Ethernet (wired) network