HP 750c HP DesignJet 755CM Printer User's Guide - C3198-60051 - Page 107

Controlling the Page Format Adjusting the Margins (Roll Media Only) PS Page format Margins Full menu mode Default: Normal Affects next file PS Adjusting the Margins (Roll Media Only) Besides nesting and setting the page size, you can also change the margin settings and expand the printing area of the page, therefore reducing the amount of media waste. The two side margins are 5.0 mm. By automatic setting of the printer's margin is 17 mm on the leading and trailing edges of the media. By reducing the margins to 10 mm on the leading and trailing edges of the media, you can use 14 mm more printing area along that axis. The adjustment is available in the front panel. With PostScript files, the margins are always "Normal". Normal Trailing edge 17.0 mm Smaller 10 mm 5.0 mm 5.0 mm 5.0 mm 17.0 mm Leading edge 5 mm = 0.2 in 10 mm = 0.4 in 17 mm = 0.67 in 10 mm 0024 Margins and Automatic Cutting IMPORTANT. When Margins is set to Smaller, the printer waits for the print to dry and the next file to begin printing before cutting the page from the roll. If you press Form Feed and Cut, the printer immediately cuts off the current page. When the next file begins, the printer cuts again to give this page the narrow margin. 4-7 PAGE 4 FORMAT