HP 750c HP DesignJet 755CM Printer User's Guide - C3198-60051 - Page 186
Sheet / Roll?
View all HP 750c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Front-Panel Messages Message Service cartridges Continue ! Explanation and Action Cartridge Check is on and an error has been detected. Press ↑ if you want to service the cartridges (replace or reseat). Press ↓ if you want to continue without servicing the cartridges. Sheet load Roll load ! Press ↑ to load sheet media. ! Press ↓ to load roll media. Sheet misaligned Reload sheet Sheet media is skewed. Remove it and reload it so that the left and right edges being loaded into the printer are square. The leading edge must also be straight. Sheet / Roll? Reload media D Either: You have chosen Sheet mode while loading roll media. Reload media. D Or: You have loaded a sheet more than 51 inches (130 cm) long. Trim sheet and reload. STATUS You have pressed the Access cartridges button. The cartridge carriage is moving Accessing cartridges out so you can access it. STATUS Aligning cartridges The printer is aligning cartridges. STATUS Cancelling You have pressed the Cancel button and the printer is in the process of cancelling the procedure. Continue when this message is no longer displayed. STATUS Checking media The printer is checking to see if media is properly positioned with respect to the perforated line of the entry platen. STATUS Creating pattern The printer is performing accuracy calibration. STATUS The ink on your print is drying. Wait before removing the print. If you remove it Ink drying (xx m xx s) before the indicated time has passed, avoid smearing the ink. STATUS Loading roll The printer is loading roll media. STATUS Loading sheet The printer is loading sheet media. STATUS Maintenance advised You are using the printer more intensively than the recommended duty cycle and should contact your local HP dealer or HP service engineer to arrange a service. For the duty cycle specification, see page 11-4. If you choose to ignore the message, you may continue to use the printer as normal, but may encounter a number of operational or print-quality problems. STATUS Measuring pattern The printer is measuring the accuracy calibration print you just loaded. 10-4