HP 8/20q HP StorageWorks 8Gb Simple SAN Connection Kit quick start instruction
HP 8/20q Manual
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 8/20q manual content summary:
- HP 8/20q | HP StorageWorks 8Gb Simple SAN Connection Kit quick start instruction - Page 1
installation instructions • One HP StorageWorks Simple SAN Connection Manager software CD, which includes HP Enterprise Virtual Array (EVA) Management, Modular Smart Array (MSA) Management, and other related software components • One HP StorageWorks 8/20q Fibre Channel Switch • One HP StorageWorks - HP 8/20q | HP StorageWorks 8Gb Simple SAN Connection Kit quick start instruction - Page 2
required for each switch port that will be connected to a device or another switch. Only HP SFPs are supported for use in the switch. On a new HP StorageWorks 8/20q Fibre Channel Switch, ports 0-7 are active. The switch supports 2 Gb, 4 Gb, and 8 Gb transmission with HP 8 Gb fiber optic transceivers - HP 8/20q | HP StorageWorks 8Gb Simple SAN Connection Kit quick start instruction - Page 3
any active switch port. 8. Close the computer cover. 9. Plug in the power cable and turn on the computer. 10.When you restart your computer, the system reports finding new hardware. Respond to these messages by clicking Cancel. The HP StorageWorks Simple SAN Connection Manager software installation - HP 8/20q | HP StorageWorks 8Gb Simple SAN Connection Kit quick start instruction - Page 4
your future growth requirements. • HP SAN Visibility is a SAN data analysis tool that securely analyzes your SAN configuration, providing an automated inventory process for switches, HBAs, and storage systems, including firmware version verification. Figure 5 Installation wizard: options The - HP 8/20q | HP StorageWorks 8Gb Simple SAN Connection Kit quick start instruction - Page 5
provides additional information. You may be prompted to upgrade, add, or modify components for successful installation. Figure 8 Add EVA Management Account dialog box 7. The message, "Your installation is complete," is displayed (Figure 9). Remove the HP software CD and then click Reboot. Figure - HP 8/20q | HP StorageWorks 8Gb Simple SAN Connection Kit quick start instruction - Page 6
restart the computer: New driver and qlremote installed but not active. For new driver and qlremote to be active either: Reboot the system (Mandatory in case of Boot from SAN) or Stop all the applications using QLogic driver. Unload QLogic driver by executing following command: # modprobe -r qla2XXX - HP 8/20q | HP StorageWorks 8Gb Simple SAN Connection Kit quick start instruction - Page 7
configured, the New Switch Setup wizard (Figure 12) guides you through setting the switch IP address, administrator password, and default zoning. For details, refer to the "Getting started" section of the HP StorageWorks Simple SAN Connection Manager user guide, available online at www.hp.com/go/8Gb
Page 1
*5697-7164*
Congratulations on your purchase of the 8Gb
Simple SAN Connection Kit. This guide provides
procedures for installing the kit components,
including the HP StorageWorks 8/20q Fibre
Channel Switch, the Host Bus Adapters (HBAs),
and the HP StorageWorks Simple SAN Connection
Manager (SSCM) software bundle on a Windows
or Linux system.
Verify contents and requirements
1.
Verify the package contents.
The 8Gb Simple SAN Connection Kit is shipped with the
following items and quantities:
• One
quick start instructions
(this document)
• One
Read-Me-First document
• One
End User License Agreement
(EULA)
• One
HP StorageWorks Rack-Mount Kit quick start installation
instructions
•
One HP StorageWorks Simple SAN Connection Manager
software CD, which includes HP Enterprise Virtual Array (EVA)
Management, Modular Smart Array (MSA) Management,
and other related software components
•
One HP StorageWorks 8/20q Fibre Channel Switch
•
One HP StorageWorks Fibre Channel Rack-Mount Kit
•
Four rubber mounting feet for the HP StorageWorks 8/20q
Fibre Channel Switch (for desktop placement, if you are not
using the rack-mount kit)
•
Ten 8 Gb shortwave fiber optic transceivers
•
Six 5m LC-LC Multi-Mode Fibre Channel (FC) cables
•
Four 8 Gb HP StorageWorks 81Q PCI Express (PCI-e) Fibre
Channel HBAs (PCIe x8 physical connector)
•
Four low-profile host bus adapter (HBA) mounting brackets
•
One standard power cord
•
One HP Power Distribution Unit (PDU) power cable
•
One serial cable
2.
Verify that the server running your management software
(management station) meets the following minimum requirements
for supporting the software (including HP StorageWorks Simple
SAN Connection Manager and other HP software):
•
Windows Server 2003 R2 operating system with SP2
•
512 MB of memory
•
160 MB of disk space
•
One 2.0 GHz processor
•
One CD ROM drive, one Ethernet port
•
One or more PCI-e slots for the HP StorageWorks 81Q PCI-e
FC HBA
•
Java Runtime Environment (JRE) 1.5 or higher
•
Internet browser: Microsoft Internet Explorer (IE), Netscape
Navigator, or Mozilla Firefox
© Copyright 2008 Hewlett-Packard Development Company, L.P.
First edition: February 2008
Product names mentioned herein may be trademarks of their
respective companies.
The information in this document is subject to change without notice.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation.
Java is a U.S. trademark of Sun Microsystems, Inc.
Printed in the U.S.
www.hp.com
HP StorageWorks
8Gb Simple SAN Connection
Kit quick start instructions