HP 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June - Page 656
range of ports on multi-bladed products., Specifies the number of lines
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 656 highlights
2 supportShow Operands This command has the following operands: slotnumber/portnumber1-portnumber2 Specify the range of ports to display. If the slotnumber/portnumber parameter is omitted, all ports in the switch display in the per-port outputs. The slotnumber must be provided when specifying a range of ports on multi-bladed products. lines Specifies the number of lines of portLogDump output to display. If this parameter is used, the slotnumber/portnumber parameter is required. Examples To display switch information for debugging: switch:admin> supportshow Date: Sun Feb 17 12:31:37 UTC 2008 Time Zone: Time Zone Hour Offset: 0 Time Zone Minute Offset: 0 Version: Kernel: Fabric OS: Made on: Flash: BootProm: 2.6.14.2 v6.1.0_main_bld23 Wed Feb 13 06:59:17 2008 Thu Feb 14 18:38:31 2008 4.6.6 supportshow groups enabled: os enabled exception enabled port enabled fabric enabled services enabled security enabled network enabled portlog enabled system enabled extend disabled filter disabled perfmon disabled ficon disabled iswitch enabled asic_db enabled iscsi enabled ag disabled **** Begin start_port_log_cmd group **** portlogdump: time task event port cmd args Thu Feb 14 18:43:12 2008 18:43:12.562 PORT debug 16 c48d6c7c,c48d6c78,c48d6c7c,abaa0f0f 18:43:21.821 FSSK event 0 0 00020000,00000000,00000000,COMP 18:43:22.022 FSSK event 0 0 00010000,00000000,00000000,COMP (output truncated) See Also supportFtp, supportSave, supportShowCfgDisable, supportShowCfgEnable, supportShowCfgShow, traceDump 630 Fabric OS Command Reference 53-1000599-02