HP 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June - Page 675

switchStatusPolicyShow 2 switchStatusPolicyShow Displays the policy parameters that determine overall switch status. Synopsis switchstatuspolicyshow Description Use this command to view the current policy parameters set for the switch. These policy parameters determine the number of failed or non-operational units allowed for each contributor before triggering a status change in the switch. The command displays the current parameters in a three-column format similar to what is shown in Table 21. The first column indicates the contributor, the second column indicates the minimum number that contributes to the DOWN status, and the third column indicates the minimum number that contributes to the MARGINAL status. The parameters can be set by the switchStatusPolicySet command. The existence of policies such as Fans, PowerSupplies, CP, WWN, and Blade may differ from platform to platform. TABLE 21 Example of contributor, values, and status Contributor DOWN MARGINAL PowerSupplies 2 1 Temperatures 2 1 Fans 2 1 WWN 0 1 CP 0 1 Blade 0 1 Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 MissingSFPs 0 0 The policy parameters determine the number of failed or non-operational units for each contributor that trigger a status change in the switch. For example, if the FaultyPorts DOWN parameter is set to 3, and three ports fail in the switch, then the status of the switch changes to DOWN. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples switch:admin> switchstatuspolicyshow The current overall switch status policy parameters: Down Marginal PowerSupplies 2 1 Temperatures 2 1 Fans 2 1 WWN 0 1 CP 0 1 Blade 0 1 Fabric OS Command Reference 649 53-1000599-02