HP 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June - Page 670

2 switchShow FCIP Ports support FCIP. comment Optionally displays: Disabled Port is disabled. Bypassed Port is bypassed (loop only). Loopback Port is in loopback mode. E_Port Fabric port; displays WWN and name of attached switch. If the port is configured as EX_Port, the WWN of the attached switch is the same as the router. F_Port Point-to-point port; displays WWN of attached N_Port. G_Port Point-to-point but not yet E_Port or F_Port. L_Port Loop port; displays number of NL_Ports. EX_Port Router port; displays WWN of the attached edge switch. Mirror Port The port is a mirror port. (Trunk master) Port is the master port in a group of trunking ports. (Trunk port, master is port #x) Port is configured as a trunking port; the master port is port #x. (upstream) E_Port is an upstream path toward the principal switch of the fabric. (downstream) E_Port is a downstream path away from the principal switch of the fabric. Persistently Disabled This port has been disabled with the portCfgPersistentDisable command. FICON Persistent DID This port has been disabled, because the switch could not obtain its configuration domain ID during the fabric reconfiguration when ficonMode was enabled. See the ficonMode help page for more information. Fabric ID conflict Two different fabrics have been assigned the same fabric ID (EX_Ports only). Fabric ID oversubscribed One fabric has been assigned two different fabric IDs (EX_Ports only). Notes If a port is configured as a long distance port, the long distance level is displayed in the format of Lx, where x represents the long distance level number. See portCfgLongDistance for the level description. The port state for disabled E_Ports display as In_Sync when the port is the interswitch link (ISL) between a Brocade 48000 and a Brocade. If the ISL is between a Brocade 48000 and a Brocade 4100 or 200E, the disabled E_Port displays as No_Sync. On a Brocade 7600 switch, if the SAS image is not consistent with the FOS image, the message "SAS Virtualization Disabled" is displayed. When a port is configured as an N_Port and is online, switchShow displays its type as an N_Port. Also, switchShow displays the WWN of the border switch attached to this N_Port as a 24-bit Port Identifier assigned to this port by the enterprise fabric. 644 Fabric OS Command Reference 53-1000599-02