HP 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June - Page 687
See Also, haDisable, sysShutDown
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 687 highlights
sysShutDown 2 flushing ide devices: hda Power down. ppc440gx System Halted To perform a system shutdown of the FR4-18i AP blade from the active CP: switch:admin> sysshutdown This command will shutdown the operating systems on your switch. You are required to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]? y This is the active Cp 2005/11/16-05:47:20, [FSSM-1003], 5641,, WARNING, Brocade12000, HA State out of sync HA is disabled Stopping blade 2 Shutting down the blade.... Stopping blade 8 Shutting down the blade.... Broadcast message from root (ttyS0) Wed Nov 16 05:47:20 2005... The system is going down for system halt NOW !! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal Unmounting all filesystems. umount2: Device or resource busy umount: /tmp: device is busy The system is halted flushing ide devices: hda Power down. ppc440gx System Halted To attempt a system shutdown from the standby CP (not supported): switch:admin> sysshutdown Shut down the whole system is not support from the standby CP For shut down the whole system please run the sysshutdown from the active CP See Also haDisable Fabric OS Command Reference 661 53-1000599-02