HP A9890A Smart Array 6400 Series Controllers User Guide - Page 11
Determining the correct installation procedure for the server, Unused autoconfigurable server - installation guide
UPC - 829160079530
View all HP A9890A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11 Determining the correct installation procedure for the server In this section Unused autoconfigurable server 11 Unused non-autoconfigurable server 12 Previously configured server ...12 Unused autoconfigurable server New HP ProLiant server models self-configure when they are powered up for the first time. For more information about the autoconfiguration process, refer to the server-specific setup and installation guide or the HP ROM-Based Setup Utility User Guide. These guides are available on the server Documentation CD. IMPORTANT: Do not power up the server until the hardware configuration is satisfactory, as described in the procedure given in this section. 1. Install the controller hardware ("Installing the controller hardware" on page 15). 2. Install physical drives, if necessary. The number of drives in the server determines the RAID level that is autoconfigured when the server is powered up (next step). For details, refer to the server-specific setup and installation guide or the HP ROM-Based Setup Utility User Guide. 3. Power up the server. The autoconfiguration process runs. IMPORTANT: The expansion module on the SA6404 controller cannot be used as a boot device. 4. Update the system firmware ("Updating the firmware" on page 21). 5. Update the controller firmware ("Updating the firmware" on page 21).