HP A9890A Smart Array 6400 Series Controllers User Guide - Page 40
Hot-plug SCSI hard drive LED combinations, current operation and cause data loss.
UPC - 829160079530
View all HP A9890A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 HP Smart Array 6400 Series Controllers User Guide Hot-plug SCSI hard drive LED combinations Activity LED (1) Online LED (2) On, off, or On or off flashing On, off, or On flashing On or flashing Flashing On Off Flashing Flashing Off Off Off Off Fault LED Interpretation (3) Flashing A predictive failure alert has been received for this drive. Replace the drive as soon as possible. Off The drive is online and is configured as part of an array. If the array is configured for fault tolerance and all other drives in the array are online, and a predictive failure alert is received or a drive capacity upgrade is in progress, you may replace the drive online. Off Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is rebuilding or undergoing capacity expansion. Off Do not remove the drive. The drive is being accessed, but (1) it is not configured as part of an array; (2) it is a replacement drive and rebuild has not yet started; or (3) it is spinning up during the POST sequence. Flashing Do not remove the drive. Removing a drive may cause data loss in non-fault-tolerant configurations. Either (1) the drive is part of an array being selected by an array configuration utility; (2) Drive Identification has been selected in HP SIM; or (3) drive firmware is being updated. On The drive has failed and has been placed offline. You may replace the drive. Off Either (1) the drive is not configured as part of an array; (2) the drive is configured as part of an array, but it is a replacement drive that is not being accessed or being rebuilt yet; or (3) the drive is configured as an online spare. If the drive is connected to an array controller, you may replace the drive online.