HP A9890A Smart Array 6400 Series Controllers User Guide - Page 12
Unused non-autoconfigurable server, Previously con d server, required
UPC - 829160079530
View all HP A9890A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 HP Smart Array 6400 Series Controllers User Guide 6. Install the operating system and device drivers ("Installing device drivers" on page 33). Instructions are provided with the CD that is supplied in the controller kit. 7. Create and format additional logical drives if desired ("Configuring an array" on page 25). The server is now ready to use. Unused non-autoconfigurable server 1. Install the controller hardware ("Installing the controller hardware" on page 15). 2. Update the system firmware ("Updating the firmware" on page 21). 3. Update the controller firmware ("Updating the firmware" on page 21). 4. Configure the server ("Configuring the server" on page 23). IMPORTANT: The expansion module on the SA6404 controller cannot be used as a boot device. 5. Create and format at least one logical drive ("Configuring an array" on page 25). 6. Install the operating system and device drivers ("Installing device drivers" on page 33). Instructions are provided with the CD that is supplied in the controller kit. 7. Create and format additional logical drives if desired ("Configuring an array" on page 25). The server is now ready to use. Previously configured server 1. Back up any data on the system. (This step is required if you are moving drives from a non-array controller to a Smart Array controller.) 2. Update the system firmware ("Updating the firmware" on page 21).