HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7
HP Brocade 8/12c Manual
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Brocade 8/12c manual content summary:
- HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 1
53-1002448-01 ® 15 December 2011 Fabric OS Message Reference Supporting Fabric OS v7.0.1 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 2
any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes .brocade.com/support/oscd. Brocade Communications Systems, Incorporated Corporate and Latin American Headquarters Brocade Communications Systems, Inc. 130 Holger Way San - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 3
Manual PLAT-1001 July 2005 Fabric OS System Error Message 53-1000046-01 Added BM, FCR, IPS, FCIP, SEC, and Reference Manual Deleted USWD chapter. -Updated Introductory chapters. -Updated throughout: rebranding, supported hardware, CLI changes. June 2007 Fabric OS Message Reference 53-1000600 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 4
.3.0: -Modified a message to BKSW, BL, BKSW, BLL, CDR, CEE CONFIG, CONF, EM, FCOE, FCPD, FCPH, FCR, FICON, FICU, FLOD, FSPF, FSSM, FW, HAM, ,HAMK, HIL, IPS, ISNS, L2SYS, MFIC, PDM, PLAT, PORT, RCS, RPCD, RTWR, SEC, SNMP, SWCH, TRCE, TRCK, WEBD, ZONE. -Added new messages to AG, AN, AUTH, BLS, C2 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 5
, RTE, and VS. -Added new messages: AG, AN, ANV, BL, C2, CDR, CCFG, ECC, EM, ESS, FABR, FCOE, FCPH, FICN, FICU, FSPF, FW, HIL, IPAD, IPS, KAC, L2SYS, LACP, LOG, MS, NS, NSM, ONM, PDM, PS, RAS, RCS, SCN, SEC, SNMP, SPM, SS, SSM, SULB, SWCH, XTUN, ZEUS, and ZONE. -Modified - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 6
- HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 7
How this document is organized lxxix Supported hardware and software lxxix What's reader lxxxiii Additional information lxxxiv Brocade resources lxxxiv Other industry severity levels 3 System error message logging 4 Configuring the syslog message destinations 4 System logging daemon - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 8
the audit message log 17 Configuring event auditing 17 Reading the system messages 18 Reading a RAS system message 18 Reading an Audit message 19 Responding to a system message 21 Looking up a system message 21 Gathering information about the problem 21 Support 22 System module descriptions - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 9
Chapter 3 AG-1011 38 AG-1012 38 AG-1013 38 AG-1014 39 AG-1015 39 AG-1016 39 AG-1017 39 AG-1018 40 AG-1019 40 AG-1020 40 AG-1021 41 AG-1022 41 AG-1023 41 AG-1024 41 AG-1025 42 AG-1026 42 AG-1027 42 AG-1028 43 AG-1029 43 AG-1030 43 AG-1031 43 AG-1032 44 AG-1033 44 AG-1034 44 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 10
Chapter 4 Chapter 5 AN-1005 48 AN-1010 48 AN-1011 48 AN-1012 49 AN-1013 49 ANV System Messages ANV-1001 51 ANV-1002 51 ANV-1003 51 ANV-1004 52 ANV-1005 52 ANV-1006 52 ANV-1007 52 ANV-1008 53 ANV-1015 53 ANV-1016 53 AUTH System Messages AUTH-1001 55 AUTH-1002 55 AUTH-1003 55 AUTH- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 11
Chapter 6 Chapter 7 AUTH-1023 60 AUTH-1025 61 AUTH-1026 61 AUTH-1027 61 AUTH-1028 62 AUTH-1029 62 AUTH-1030 63 AUTH-1031 63 AUTH-1032 63 AUTH-1033 64 AUTH-1034 64 AUTH-1035 64 AUTH-1036 65 AUTH-1037 65 AUTH-1038 65 AUTH-1039 66 AUTH-1040 66 AUTH-1041 66 AUTH-1042 67 AUTH-1043 67 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 12
BL-1009 73 BL-1010 74 BL-1011 74 BL-1012 74 BL-1013 75 BL-1014 75 BL-1015 76 BL-1016 76 BL-1017 76 BL-1018 77 BL-1019 77 BL-1020 77 BL-1021 78 BL-1022 78 BL-1023 78 BL-1024 79 BL-1025 79 BL-1026 79 BL-1027 79 BL-1028 80 BL-1029 80 BL-1030 80 BL-1031 81 BL-1032 81 BL-1033 81 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 13
BL-1050 85 BL-1051 85 Chapter 8 BLL System Messages BLL-1000 87 Chapter 9 BLS System Messages BLS-1000 89 BLS-1001 89 BLS-1002 89 BLS-1003 90 BLS-1004 90 BLS-1005 90 Chapter 10 BM System Messages BM-1001 91 BM-1002 91 BM-1003 91 BM-1004 92 BM-1005 92 BM-1006 92 BM-1007 93 BM- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 14
C2-1012 99 C2-1013 100 C2-1014 100 C2-1015 100 C2-1016 100 C2-1017 101 C2-1018 101 C2-1019 101 Chapter 12 C3 System Messages C3-1001 103 C3-1002 103 C3-1004 103 C3-1006 104 C3-1007 104 C3-1008 104 C3-1009 104 C3 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 15
CCFG-1003 111 CCFG-1004 112 CCFG-1005 112 CCFG-1006 112 CCFG-1007 112 CCFG-1008 113 CCFG-1009 113 CCFG-1010 113 CCFG-1011 113 CCFG-1012 114 Chapter 15 CDR System Messages CDR-1001 115 CDR-1002 115 CDR-1003 115 CDR-1004 116 CDR-1005 116 CDR-1006 116 CDR-1007 116 CDR-1008 117 CDR- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 16
CHS-1005 124 Chapter 18 CNM System Messages CNM-1001 125 CNM-1002 125 CNM-1003 125 CNM-1004 126 CNM-1005 126 CNM-1006 126 CNM-1007 126 CNM-1008 127 CNM-1009 127 CNM-1010 127 CNM-1011 127 CNM-1012 128 CNM-1013 128 CNM-1014 128 CNM-1015 128 CNM-1016 129 CNM-1017 129 CNM-1018 129 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 17
Fabric OS Message Reference 53-1002448-01 CNM-1035 133 CNM-1036 134 CNM-1037 134 CNM-1038 134 CNM-1039 134 CNM-1040 135 CNM-1041 135 CNM-1042 135 CNM-1043 135 CNM-1044 136 CNM-1045 136 CNM-1046 136 CNM-1047 136 CNM-1048 137 CNM-1049 137 CNM-1050 137 CNM-1051 137 CNM-1052 138 CNM- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 18
CNM-3010 143 CNM-3011 143 CNM-3012 143 Chapter 19 CONF System Messages CONF-1000 145 CONF-1001 145 CONF-1020 145 CONF-1021 146 CONF-1022 146 CONF-1023 146 CONF-1024 146 CONF-1030 147 CONF-1031 147 CONF-1032 147 CONF-1040 147 CONF-1041 148 CONF-1042 148 CONF-1043 148 Chapter 20 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 19
CVLC-1015 155 CVLC-1016 155 CVLC-1017 155 CVLC-1018 156 CVLC-1019 156 CVLC-1020 156 CVLC-1021 157 CVLC-1022 157 CVLC-1023 157 CVLC-1024 157 CVLC-1025 158 CVLC-1026 158 CVLC-1027 158 CVLC-1028 159 CVLC-1029 159 CVLC-1030 159 CVLC-1031 160 CVLC-1032 160 CVLC-1033 160 CVLC-1034 160 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 20
CVLM-3001 166 CVLM-3002 166 CVLM-3003 166 CVLM-3004 167 CVLM-3005 167 CVLM-3006 167 CVLM-3007 167 CVLM-3008 168 CVLM-3009 168 CVLM-3010 168 CVLM-3011 168 CVLM-3012 169 CVLM-3013 169 CVLM-3014 169 CVLM-3015 170 CVLM-3016 170 CVLM-3017 170 CVLM-3018 170 CVLM-3019 171 CVLM-3020 171 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 21
DOT1-1008 176 DOT1-1009 177 DOT1-1010 177 Chapter 24 ECC System Messages ECC-1000 179 ECC-1001 179 Chapter 25 EM System Messages EM-1001 181 EM-1002 181 EM-1003 181 EM-1004 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 22
EM-1043 190 EM-1044 190 EM-1045 191 EM-1046 191 EM-1047 191 EM-1048 192 EM-1049 192 EM-1050 192 EM-1051 193 EM-1057 193 EM-1058 193 EM-1059 194 EM-1060 194 EM-1061 194 EM-1062 195 EM-1063 195 EM-1064 195 EM-1065 195 EM-1066 196 EM-1067 196 EM-1068 196 EM-1069 197 EM-1070 197 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 23
Chapter 27 ESWCH System Messages ESW-1001 203 ESW-1002 203 ESW-1003 203 ESW-1004 204 ESW-1005 204 ESW-1006 204 ESW-1007 204 ESW-1008 205 Chapter 28 EVMD System Messages EVMD-1001 207 Chapter 29 FABR System Messages FABR-1001 209 FABR-1002 209 FABR-1003 209 FABR-1004 210 FABR-1005 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 24
FABR-1024 216 FABR-1029 217 FABR-1030 217 FABR-1031 217 FABR-1032 218 FABR-1034 218 FABR-1035 218 FABR-1036 218 FABR-1037 219 FABR-1038 219 FABR-1039 219 FABR-1040 220 FABR-1041 220 FABR-1043 220 FABR-1044 221 FABR-1045 221 FABR-1046 221 FABR-1047 222 FABR-1048 222 FABR-1049 222 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 25
FABS-1013 228 FABS-1014 228 FABS-1015 228 Chapter 31 FBC System Messages FBC-1001 231 Chapter 32 FCIP System Messages FCIP-1000 233 FCIP-1001 233 FCIP-1002 233 FCIP-1003 234 FCIP-1004 234 Chapter 33 FCMC System Messages FCMC-1001 235 Chapter 34 FCOE System Messages FCOE-1001 237 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 26
FCOE-1024 242 FCOE-1025 242 FCOE-1026 242 FCOE-1027 242 FCOE-1028 243 FCOE-1029 243 FCOE-1030 243 FCOE-1031 243 FCOE-1032 244 FCOE-1033 244 FCOE-1034 244 FCOE-1037 244 FCOE-1038 245 FCOE-1039 245 FCOE-1040 245 FCOE-1041 245 FCOE-1042 246 FCOE-1043 246 FCOE-1044 246 FCOE-1045 246 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 27
Fabric OS Message Reference 53-1002448-01 FCR-1002 253 FCR-1003 253 FCR-1004 253 FCR-1005 254 FCR-1006 254 FCR-1007 254 FCR-1008 255 FCR-1009 255 FCR-1010 255 FCR-1011 255 FCR-1012 256 FCR-1013 256 FCR-1015 256 FCR-1016 257 FCR-1018 257 FCR-1019 257 FCR-1020 258 FCR-1021 258 FCR- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 28
FCR-1041 264 FCR-1042 264 FCR-1043 264 FCR-1048 265 FCR-1049 265 FCR-1053 265 FCR-1054 265 FCR-1055 266 FCR-1056 266 FCR-1057 266 FCR-1058 267 FCR-1059 267 FCR-1060 267 FCR-1061 268 FCR-1062 268 FCR-1063 268 FCR-1064 269 FCR-1065 269 FCR-1066 269 FCR-1067 269 FCR-1068 270 FCR- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 29
FCR-1085 275 FCR-1086 275 FCR-1087 275 FCR-1088 276 FCR-1089 276 FCR-1091 276 FCR-1092 276 FCR-1093 277 FCR-1094 277 Chapter 38 FICON System Messages FICN-1003 279 FICN-1004 280 FICN-1005 280 FICN-1006 280 FICN-1007 281 FICN-1008 281 FICN-1009 281 FICN-1010 282 FICN-1011 282 FICN - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 30
FICN-1029 288 FICN-1030 288 FICN-1031 288 FICN-1032 288 FICN-1033 289 FICN-1034 289 FICN-1035 289 FICN-1036 290 FICN-1037 290 FICN-1038 290 FICN-1039 290 FICN-1040 291 FICN-1041 291 FICN-1042 291 FICN-1043 292 FICN-1044 292 FICN-1045 292 FICN-1046 293 FICN-1047 293 FICN-1048 293 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 31
Fabric OS Message Reference 53-1002448-01 FICN-1066 299 FICN-1067 299 FICN-1068 299 FICN-1069 300 FICN-1070 300 FICN-1071 300 FICN-1072 301 FICN-1073 301 FICN-1074 301 FICN-1075 302 FICN-1076 302 FICN-1077 302 FICN-1078 303 FICN-1079 303 FICN-1080 304 FICN-1081 304 FICN-1082 304 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 32
FICN-1103 311 FICN-1104 311 FICN-1105 312 FICN-1106 312 FICN-1107 312 FICN-1108 313 FICN-1109 313 FICN-1110 313 FICN-1111 314 FICN-1112 314 FICN-1113 314 FICN-1114 315 FICN-1115 315 FICN-1116 315 FICN-1117 316 FICN-1118 316 FICN-1119 316 FICN-1120 317 FICN-1121 317 FICN-1122 317 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 33
FICU-1006 322 FICU-1007 323 FICU-1008 323 FICU-1009 323 FICU-1010 323 FICU-1011 324 FICU-1012 324 FICU-1013 324 FICU-1017 324 FICU-1018 325 FICU-1019 325 FICU-1020 325 FICU-1021 325 FICU-1022 326 FICU-1023 326 FICU-1024 326 Chapter 40 FKLB System Messages FKLB-1001 327 Chapter 41 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 34
Chapter 43 FSS System Messages FSS-1001 335 FSS-1002 335 FSS-1003 335 FSS-1004 336 FSS-1005 336 FSS-1006 336 FSS-1007 337 FSS-1008 337 FSS-1009 337 FSS-1010 337 FSS-1011 338 Chapter 44 FSSM System Messages FSSM-1002 339 FSSM-1003 339 FSSM-1004 339 Chapter 45 FW System Messages FW- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 35
Fabric OS Message Reference 53-1002448-01 FW-1043 346 FW-1044 347 FW-1045 347 FW-1046 347 FW-1047 348 FW-1048 348 FW-1049 348 FW-1050 348 FW-1051 349 FW-1052 349 FW-1053 349 FW-1054 350 FW-1113 350 FW-1114 350 FW-1115 351 FW-1116 351 FW-1117 351 FW-1118 352 FW-1119 352 FW-1120 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 36
FW-1138 359 FW-1139 359 FW-1140 359 FW-1160 360 FW-1161 360 FW-1162 360 FW-1163 361 FW-1164 361 FW-1165 361 FW-1166 362 FW-1167 362 FW-1168 362 FW-1169 363 FW-1170 363 FW-1171 363 FW-1172 364 FW-1173 364 FW-1174 364 FW-1175 365 FW-1176 365 FW-1177 365 FW-1178 366 FW-1179 366 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 37
Fabric OS Message Reference 53-1002448-01 FW-1194 371 FW-1195 371 FW-1196 371 FW-1197 372 FW-1198 372 FW-1199 372 FW-1200 373 FW-1201 373 FW-1202 373 FW-1203 373 FW-1204 374 FW-1205 374 FW-1206 374 FW-1207 375 FW-1244 375 FW-1245 375 FW-1246 376 FW-1247 376 FW-1248 376 FW-1249 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 38
xxxviii FW-1334 383 FW-1335 383 FW-1336 383 FW-1337 384 FW-1338 384 FW-1339 385 FW-1340 385 FW-1341 385 FW-1342 386 FW-1343 386 FW-1349 386 FW-1350 387 FW-1352 387 FW-1353 387 FW-1354 388 FW-1355 388 FW-1356 389 FW-1357 389 FW-1358 389 FW-1359 390 FW-1364 390 FW-1365 390 FW- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 39
Fabric OS Message Reference 53-1002448-01 FW-1401 396 FW-1402 396 FW-1403 397 FW-1404 397 FW-1405 397 FW-1406 397 FW-1407 398 FW-1408 398 FW-1424 398 FW-1425 399 FW-1426 399 FW-1427 399 FW-1428 399 FW-1429 400 FW-1430 400 FW-1431 400 FW-1432 401 FW-1433 401 FW-1434 401 FW-1435 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 40
FW-1511 407 FW-1512 408 FW-1513 408 FW-1514 408 FW-1515 409 FW-1516 409 FW-1517 409 FW-1518 410 FW-1519 410 FW-1520 410 FW-1521 411 FW-1522 411 FW-1523 411 FW-1524 412 FW-1525 412 FW-1526 412 FW-1527 413 FW-1528 413 FW-1529 413 FW-1530 414 FW-1531 414 FW-1532 414 FW-1533 415 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 41
FW-3022 419 Chapter 46 HAM System Messages HAM-1001 421 HAM-1002 421 HAM-1004 421 HAM-1005 422 HAM-1006 422 HAM-1007 423 HAM-1008 423 HAM-1009 423 HAM-1010 424 HAM-1011 424 HAM-1012 424 HAM-1013 425 HAM-1014 425 Chapter 47 HAMK System Messages HAMK-1001 427 HAMK-1002 427 HAMK- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 42
HIL-1208 433 HIL-1301 434 HIL-1302 434 HIL-1303 434 HIL-1304 434 HIL-1305 435 HIL-1306 435 HIL-1307 435 HIL-1308 436 HIL-1309 436 HIL-1310 436 HIL-1311 436 HIL-1401 437 HIL-1402 437 HIL-1403 437 HIL-1404 437 HIL-1501 438 HIL-1502 438 HIL-1503 438 HIL-1504 439 HIL-1505 439 HIL- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 43
Chapter 49 HLO System Messages HLO-1001 445 HLO-1002 445 HLO-1003 445 Chapter 50 HMON System Messages HMON-1001 447 Chapter 51 HSL System Messages HSL-1000 449 HSL-1001 449 HSL-1002 449 HSL-1003 449 HSL-1004 450 HSL-1005 450 HSL-1006 450 HSL-1007 450 Chapter 52 HTTP System - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 44
Messages IPAD-1000 463 IPAD-1001 463 IPAD-1002 463 IPAD-1003 464 IPAD-1004 464 Chapter 57 IPS System Messages IPS-1001 465 IPS-1002 465 IPS-1003 465 IPS-1004 466 IPS-1005 466 IPS-1006 466 IPS-1007 466 Chapter 58 ISNS System Messages ISNS-1001 469 ISNS-1002 469 ISNS-1003 469 ISNS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 45
KAC-1008 474 KAC-1009 474 KAC-1010 474 KAC-1011 475 KAC-1012 475 KAC-1013 475 KAC-1014 475 KAC-1015 476 KAC-1016 476 Chapter 60 KSWD System Messages KSWD-1001 477 KSWD-1002 477 Chapter 61 KTRC System Messages KTRC-1001 479 KTRC-1002 479 KTRC-1003 479 KTRC-1004 479 KTRC-1005 480 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 46
Chapter 65 LANCE System Messages LANCE-1000 489 Chapter 66 LFM System Messages LFM-1001 491 LFM-1002 491 LFM-1003 491 LFM-1004 492 LFM-1005 492 LFM-1006 492 Chapter 67 LOG System Messages LOG-1000 493 LOG-1001 493 LOG-1002 493 LOG-1003 494 LOG-1004 494 LOG-1005 494 LOG-1006 494 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 47
MCAST_SS-1012 499 MCAST_SS-1013 500 MCAST_SS-1014 500 MCAST_SS-1015 500 MCAST_SS-1016 500 MCAST_SS-1017 501 MCAST_SS-1018 501 MCAST_SS-1019 501 MCAST_SS-1020 501 Chapter 70 MFIC System Messages MFIC-1001 503 MFIC-1002 503 MFIC-1003 504 Chapter 71 MPTH System Messages MPTH-1001 505 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 48
MS-1025 513 MS-1026 514 MS-1027 514 MS-1028 514 MS-1029 514 Chapter 74 MSTP System Messages MSTP-1001 515 MSTP-1002 515 MSTP-1003 515 MSTP-2001 515 MSTP-2002 516 MSTP-2003 516 MSTP-2004 516 MSTP-2005 516 MSTP-2006 517 Chapter 75 NBFS System Messages NBFS-1001 519 NBFS-1002 519 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 49
NSM-1002 525 NSM-1003 526 NSM-1004 526 NSM-1005 526 NSM-1006 526 NSM-1007 527 NSM-1008 527 NSM-1009 527 NSM-1010 527 NSM-1011 528 NSM-1012 528 NSM-1013 528 NSM-1014 528 NSM-1015 529 NSM-1016 529 NSM-1017 529 NSM-1018 529 NSM-1019 530 NSM-1020 530 Chapter 78 ONMD System Messages - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 50
PDM-1009 535 PDM-1010 535 PDM-1011 536 PDM-1012 536 PDM-1013 536 PDM-1014 536 PDM-1017 537 PDM-1019 537 PDM-1020 537 PDM-1021 538 PDM-1022 538 PDM-1023 538 PDM-1024 538 PDM-1025 539 PDM-1026 539 Chapter 80 PDTR System Messages PDTR-1001 541 PDTR-1002 541 Chapter 81 PLAT System - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 51
PMGR-1011 547 Chapter 83 PORT System Messages PORT-1003 549 PORT-1004 549 PORT-1005 549 PORT-1006 550 PORT-1007 550 PORT-1008 550 PORT-1009 550 PORT-1010 551 Chapter 84 PS System Messages PS-1000 553 PS-1001 553 PS-1002 553 PS-1003 554 PS-1004 554 PS-1005 554 PS-1006 554 PS-1007 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 52
RAS-1006 560 RAS-1007 560 RAS-2001 560 RAS-2002 561 RAS-2003 561 RAS-3001 561 RAS-3002 561 RAS-3003 562 RAS-3004 562 Chapter 87 RCS System Messages RCS-1001 563 RCS-1002 563 RCS-1003 563 RCS-1004 564 RCS-1005 564 RCS-1006 564 RCS-1007 565 RCS-1008 565 RCS-1009 565 RCS-1010 566 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 53
RPCD-1002 571 RPCD-1003 571 RPCD-1004 572 RPCD-1005 572 RPCD-1006 572 RPCD-1007 572 Chapter 91 RTE System Messages RTE-1001 573 Chapter 92 RTWR System Messages RTWR-1001 575 RTWR-1002 575 RTWR-1003 576 Chapter 93 SCN System Messages SCN-1001 577 SCN-1002 578 Chapter 94 SEC System - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 54
SEC-1032 585 SEC-1033 585 SEC-1034 585 SEC-1035 586 SEC-1036 586 SEC-1037 586 SEC-1038 586 SEC-1040 587 SEC-1041 587 SEC-1042 587 SEC-1043 587 SEC-1044 588 SEC-1045 588 SEC-1046 588 SEC-1049 589 SEC-1050 589 SEC-1051 589 SEC-1052 590 SEC-1053 590 SEC-1054 590 SEC-1055 591 SEC- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 55
Fabric OS Message Reference 53-1002448-01 SEC-1079 595 SEC-1080 596 SEC-1081 596 SEC-1082 596 SEC-1083 597 SEC-1084 597 SEC-1085 597 SEC-1086 597 SEC-1087 598 SEC-1088 598 SEC-1089 598 SEC-1090 599 SEC-1091 599 SEC-1092 599 SEC-1093 600 SEC-1094 600 SEC-1095 600 SEC-1096 601 SEC- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 56
SEC-1118 606 SEC-1119 607 SEC-1121 607 SEC-1122 607 SEC-1123 607 SEC-1124 608 SEC-1126 608 SEC-1130 608 SEC-1135 608 SEC-1136 609 SEC-1137 609 SEC-1138 609 SEC-1139 610 SEC-1142 610 SEC-1145 610 SEC-1146 611 SEC-1153 611 SEC-1154 611 SEC-1155 612 SEC-1156 612 SEC-1157 612 SEC- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 57
Fabric OS Message Reference 53-1002448-01 SEC-1180 617 SEC-1181 617 SEC-1182 618 SEC-1183 618 SEC-1184 618 SEC-1185 619 SEC-1186 619 SEC-1187 619 SEC-1188 620 SEC-1189 620 SEC-1190 620 SEC-1191 621 SEC-1192 621 SEC-1193 621 SEC-1194 622 SEC-1195 622 SEC-1196 622 SEC-1197 623 SEC- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 58
SEC-1310 628 SEC-1311 629 SEC-1312 629 SEC-1313 629 SEC-1314 630 SEC-1315 630 SEC-1316 630 SEC-1317 630 SEC-1318 631 SEC-1319 631 SEC-1320 631 SEC-1321 631 SEC-1322 632 SEC-1323 632 SEC-1324 632 SEC-1325 633 SEC-1326 633 SEC-1327 633 SEC-1328 633 SEC-1329 634 SEC-1330 634 SEC- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 59
SEC-3063 639 SEC-3064 639 SEC-3065 639 SEC-3066 639 SEC-3067 640 SEC-4001 640 Chapter 95 SFLO System Messages SFLO-1001 641 SFLO-1002 641 SFLO-1003 641 SFLO-1004 641 SFLO-1005 642 SFLO-1006 642 SFLO-1007 642 SFLO-1008 642 Chapter 96 SNMP System Messages SNMP-1001 645 SNMP-1002 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 60
SPC-2007 651 SPC-2008 651 SPC-2009 652 SPC-2010 652 SPC-2011 652 SPC-2012 653 SPC-2013 653 SPC-2014 653 SPC-2040 653 SPC-2041 654 SPC-2042 654 SPC-2043 654 SPC-2044 654 SPC-3001 655 SPC-3002 655 SPC-3003 655 SPC-3004 656 SPC-3005 656 SPC-3006 656 SPC-3007 657 SPC-3008 657 SPC- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 61
Fabric OS Message Reference 53-1002448-01 SPM-1008 662 SPM-1009 663 SPM-1010 663 SPM-1011 663 SPM-1012 663 SPM-1013 664 SPM-1014 664 SPM-1015 664 SPM-1016 665 SPM-3001 665 SPM-3002 665 SPM-3003 665 SPM-3004 666 SPM-3005 666 SPM-3006 666 SPM-3007 666 SPM-3008 667 SPM-3009 667 SPM- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 62
SPM-3029 672 Chapter 99 SS System Messages SS-1000 673 SS-1001 673 SS-1002 673 SS-1003 674 SS-1004 674 SS-1005 674 SS-1006 674 SS-1007 675 SS-1008 675 SS-1009 675 Chapter 100 SSMD System Messages SSMD-1001 677 SSMD-1002 677 SSMD-1003 677 SSMD-1004 678 SSMD-1005 678 SSMD-1006 678 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 63
SSMD-1214 683 SSMD-1215 683 SSMD-1216 684 SSMD-1217 684 SSMD-1300 684 SSMD-1301 684 SSMD-1302 685 SSMD-1303 685 SSMD-1304 685 SSMD-1305 685 SSMD-1306 686 SSMD-1307 686 SSMD-1308 686 SSMD-1309 686 SSMD-1310 687 SSMD-1311 687 SSMD-1312 687 SSMD-1313 687 SSMD-1314 688 SSMD-1315 688 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 64
SULB-1018 700 SULB-1020 700 SULB-1021 700 SULB-1022 701 SULB-1023 701 SULB-1024 701 SULB-1025 702 SULB-1026 702 SULB-1030 702 SULB-1031 702 SULB-1032 703 SULB-1033 703 SULB-1034 703 SULB-1035 703 SULB-1036 704 SULB-1037 704 SULB-1038 704 SULB-1039 705 SULB-1040 705 SULB-1041 705 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 65
SWCH-1013 710 SWCH-1014 711 SWCH-1015 711 SWCH-1016 711 SWCH-1017 711 SWCH-1018 712 SWCH-1019 712 SWCH-1020 712 SWCH-1021 713 SWCH-1022 713 Chapter 103 SYSC System Messages SYSC-1001 715 SYSC-1002 715 SYSC-1003 715 SYSC-1004 716 SYSC-1005 716 Chapter 104 SYSM System Messages SYSM-1001 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 66
TRCE-1008 723 TRCE-1009 723 TRCE-1010 724 TRCE-1011 724 TRCE-1012 724 Chapter 107 TRCK System Messages TRCK-1001 725 TRCK-1002 725 TRCK-1003 725 TRCK-1004 726 TRCK-1005 726 TRCK-1006 726 Chapter 108 TS System Messages TS-1001 727 TS-1002 727 TS-1006 728 TS-1007 728 TS-1008 728 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 67
Chapter 111 VS System Messages VS-1001 735 VS-1002 735 VS-1003 735 VS-1004 736 VS-1005 736 VS-1006 736 VS-1007 736 VS-1008 737 Chapter 112 WEBD System Messages WEBD-1001 739 WEBD-1002 739 WEBD-1004 739 WEBD-1005 739 WEBD-1006 740 WEBD-1007 740 WEBD-1008 740 Chapter 113 XTUN System - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 68
XTUN-2007 745 XTUN-2008 745 XTUN-2009 746 XTUN-2010 746 XTUN-2011 746 XTUN-2020 746 XTUN-2021 747 XTUN-2022 747 XTUN-2023 747 XTUN-2024 748 XTUN-2025 748 Chapter 114 ZEUS System Messages ZEUS-1001 749 ZEUS-1002 749 ZEUS-1003 749 ZEUS-1004 750 ZEUS-1005 750 ZEUS-1015 750 ZEUS-1016 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 69
Fabric OS Message Reference 53-1002448-01 ZONE-1022 758 ZONE-1023 758 ZONE-1024 758 ZONE-1026 758 ZONE-1027 759 ZONE-1028 759 ZONE-1029 759 ZONE-1030 760 ZONE-1031 760 ZONE-1032 760 ZONE-1033 761 ZONE-1034 761 ZONE-1035 761 ZONE-1036 761 ZONE-1037 762 ZONE-1038 762 ZONE-1039 762 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 70
ZONE-1060 768 Section II Audit Log Messages Chapter 116 AUDIT AG System Messages AG-1033 771 AG-1034 771 AG-1035 771 AG-1036 772 AG-1037 772 Chapter 117 AUDIT AN System Messages AN-1003 773 AN-1004 773 AN-1005 773 AN-1006 774 AN-1010 774 AN-1011 774 AN-1012 775 AN-1013 775 Chapter - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 71
Chapter 120 AUDIT CCFG System Messages CCFG-1002 783 CCFG-1003 783 CCFG-1013 783 Chapter 121 AUDIT CNM System Messages CNM-3001 785 CNM-3002 785 CNM-3003 785 CNM-3004 786 CNM-3005 786 CNM-3006 786 CNM-3007 786 CNM-3008 787 CNM-3009 787 CNM-3010 787 CNM-3011 788 CNM-3012 788 Chapter - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 72
CVLM-3012 794 CVLM-3013 794 CVLM-3014 794 CVLM-3015 795 CVLM-3016 795 CVLM-3017 795 CVLM-3018 796 CVLM-3019 796 CVLM-3020 796 CVLM-3021 796 CVLM-3022 797 CVLM-3023 797 CVLM-3024 797 CVLM-3025 798 CVLM-3026 798 CVLM-3027 798 CVLM-3028 798 Chapter 124 AUDIT ESS System Messages ESS- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 73
FW-1404 808 FW-1405 808 FW-1406 808 FW-3001 808 Chapter 128 AUDIT HTTP System Messages HTTP-1002 811 HTTP-1003 811 Chapter 129 AUDIT IPAD System Messages IPAD-1002 813 Chapter 130 AUDIT MS System Messages MS-1027 815 MS-1028 815 MS-1029 815 Chapter 131 AUDIT PMGR System Messages PMGR-1001 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 74
SEC-3005 825 SEC-3006 825 SEC-3007 825 SEC-3008 826 SEC-3009 826 SEC-3010 826 SEC-3011 826 SEC-3012 827 SEC-3013 827 SEC-3014 827 SEC-3015 828 SEC-3016 828 SEC-3017 828 SEC-3018 829 SEC-3019 829 SEC-3020 829 SEC-3021 830 SEC-3022 830 SEC-3023 830 SEC-3024 830 SEC-3025 831 SEC- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 75
SEC-3046 836 SEC-3047 836 SEC-3048 836 SEC-3049 836 SEC-3050 837 SEC-3051 837 SEC-3061 837 SEC-3062 837 SEC-3063 838 SEC-3064 838 SEC-3065 838 SEC-3066 839 SEC-3067 839 SEC-4001 839 Chapter 135 AUDIT SNMP System Messages SNMP-1004 841 SNMP-1005 841 SNMP-1006 841 SNMP-1009 842 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 76
SPM-3016 847 SPM-3017 847 SPM-3018 848 SPM-3019 848 SPM-3020 848 SPM-3021 848 SPM-3022 849 SPM-3023 849 SPM-3024 849 SPM-3025 850 SPM-3026 850 SPM-3027 850 SPM-3028 850 SPM-3029 851 Chapter 137 AUDIT SULB System Messages SULB-1001 853 SULB-1002 853 SULB-1003 853 SULB-1004 854 SULB- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 77
SULB-1039 865 SULB-1040 865 SULB-1041 866 SULB-1042 866 Chapter 138 AUDIT SWCH System Messages SWCH-1012 867 SWCH-1013 867 SWCH-1014 867 Chapter 139 AUDIT UCST System Messages UCST-1021 869 UCST-1022 869 UCST-1023 869 UCST-1024 870 UCST-1025 870 UCST-1026 870 UCST-1027 870 Chapter 140 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 78
ZONE-3019 878 ZONE-3020 878 ZONE-3021 879 ZONE-3022 879 ZONE-3023 879 ZONE-3024 880 ZONE-3025 880 lxxviii Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 79
or parts of procedures documented here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc. for Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 80
port blade - FC16-32 port blade - FC16-48 port blade - FS8-18 Encryption Blade - FX8-24 DCX Extension Blade • Brocade VA-40FC The following hardware platforms are not supported in Fabric OS v7.0.1. These platforms can interoperate with switches running Fabric OS v7.0.1, but cannot load Fabric OS v7 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 81
The following blades are not supported in any chassis operating with Fabric OS v7.0.1: • FA4-18 • FC4-16IP • FC4-16 • FC4-32 • FC4-48 What's new in this document The following - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 82
of user- guide are presented in mixed lettercase: for example, switchShow. In actual examples, command lettercase is all lowercase. Command syntax conventions Command syntax in this manual follows these conventions: command --option, option describes how to perform configuration tasks using the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 83
statements are used in this manual. They are listed below you or cause damage to hardware, firmware, software, or data. DANGER Brocade and Fibre Channel, see the technical glossaries on MyBrocade. See "Brocade resources" on page lxxxiv for instructions on accessing MyBrocade. For definitions of SAN - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 84
://www.t11.org For information about the Fibre Channel industry, visit the Fibre Channel Industry Association website: http://www.fibrechannel.org Getting technical help Contact your switch support supplier for hardware, firmware, and software support, including product repairs and part ordering. To - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 85
is located as follows: • Brocade 300, 5100, 5300, 6505, 6510, 7800, 8000, VA-40FC, and Brocade Encryption Switch-On the switch ID pull-out tab located to hear from you. Forward your feedback to: [email protected] Provide the title and version number of the document and as much detail as - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 86
lxxxvi Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 87
, and configuring Audit messages 16 •Reading the system messages 18 •Responding to a system message 21 •System module descriptions 23 Overview of system messages This guide supports Fabric OS v7.0.1 and documents system messages that can help you diagnose and fix problems with a switch or fabric - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 88
is designed to support post-event audits and problem determination based on high-frequency events of certain types such as security violations, zoning configuration changes, firmware downloads, and certain types of fabric events. Audit messages flagged as AUDIT are not saved in the switch error logs - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 89
and can be retrieved using the supportSave command. The FFDC data is used for debugging or analyzing the problem. FFDC is intended for use by Brocade technical support. FFDC is enabled by default. Execute the supportFfdc command to enable or disable FFDC. If FFDC is disabled, the FFDC daemon does - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 90
or any other operating system that supports the standard syslogd functionality. Configuring for syslogd involves configuring the host, enabling syslogd on the Brocade model, and, optionally, setting the facility level. For the Brocade DCX family of switches, each control processor (CP) has a unique - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 91
Configuring the syslog message destinations 1 For the Brocade DCX family of switches, any security violations that occur through syslog configuration on the switch. switch:admin> syslogdipshow syslog.1 172.26.3.83 You can remove a configured syslog server using the syslogdIpRemove IP address - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 92
(1) • Error (2) • Warning (3) • Informational (4) • Debug (5) By default, the severity level is set to None, implying all traps are filtered and Brocade switches send traps out on UDP port 162. To receive traps, the management station IP address must be configured on the switch. You can configure - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 93
log. Port logs are typically used to troubleshoot device connections. Configuring the SNMP server hosts Fabric OS v7.0.1 supports SNMP version 1 and version 3. Use the snmpConfig command to configure the SNMPv1 and SNMPv3 hosts and their configurations. Configuring the SNMPv1 trap recipient Use the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 94
the SNMP informs "SNMP Informs Enabled". switch:admin> snmpconfig --set snmpv3 SNMP Informs Enabled (true, t, false, f): [false] SNMPv3 user configuration(snmp user not configured in FOS user database will have physical AD and admin role as the default): User (rw): [snmpadmin1] Auth Protocol [MD5 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 95
's IP address : [10.24.32.143] [...] NOTE To receive the SNMP traps, the username, the authentication protocol, and the privacy protocol must match between the switch and the management station. 3. Execute the snmpConfig --show snmpv3 command to verify the SNMP agent configuration. switch:admin - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 96
. When prompted to enable the SNMP informs, enter true or t. Informs are disabled by default. switch:admin> snmpconfig --set snmpv3 SNMP Informs Enabled (true, t, false, f): [false] t SNMPv3 user configuration(snmp user not configured in FOS user database will have physical AD and admin role as the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 97
verify the SNMP agent configuration. switch:admin> snmpconfig --show snmpv3 SNMP Informs = 1 (ON) SNMPv3 USM configuration: User 1 (rw): snmpadmin1 severity level, the SNMP trap, swEventTrap, is sent to the configured trap recipients. By default, the severity level is set at 0 (None), implying that - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 98
configure MIBs interactively. All the supported MIBs and associated traps are displayed. You can change the DesiredSeverity for swEventTrap to 1 (Critical), 2 (Error), 3 (Warning), or 4 (Informational). The default value is 0. switch : YES bdTrap: YES 12 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 99
[yes] [...] 3. Execute the snmpConfig --show mibCapability command to verify the severity level of swEventTrap. switch:admin> snmpconfig --show mibcapability FE-MIB: YES SW-MIB: YES FA-MIB: YES FICON-MIB: : YES [...] Commands for displaying and configuring the system message logs Table 3 describes - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 100
Fabric OS. Manages the SNMP agent configuration. Enables and disables FFDC. Sets, clears, or displays support FTP parameters or a time interval to commands. This output is used by your switch service provider to diagnose and correct problems with the switch. The output from this command is very long - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 101
Version: 7.0.1 2000/12/17-05:54:30, [HAM-1004], 1, CHASSIS, INFO, switch, Processor rebooted - Reset 2000/12/17-05:55:04, [ZONE-1034], 2, FID 128, INFO, switch, A new zone database file is created. 2000/12/17-05:55:04, [FCR-1069], 3, FID 128, INFO, switch, The FC Routing service is enabled. 2000/12 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 102
, INFO, switch, Processor rebooted - Reset Type to continue, Q to stop: 2011/11/11-05:55:04, [ZONE-1034], 2, FID 128, INFO, switch, A new zone database file is created. Type to continue, Q to stop: 2011/11/11-05:55:04, [FCR-1069], 3, FID 128, INFO, switch, The FC Routing service is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 103
to set the Audit severity level. By default, all messages are logged. When the severity is set, only messages with the configured severity and higher are displayed. Valid values for severity level are INFO, WARNING, ERROR, and CRITICAL switch:admin> auditcfg --severity ERROR 5. Execute the auditCfg - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 104
configured remote host using the syslogdIpAdd command. For more information on configuring the syslog server, refer to "Configuring has uploaded support information to the host with IP address 168. reset to 1 using the errClear command. The sequence number is persistent across power cycles and switch - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 105
post-event auditing and troubleshooting the problem. The following example shows the format of the Audit event message. AUDIT, , [], , , ////, /, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 106
TABLE 5 Audit message field description (Continued) Variable name Description Time Stamp Event ID Severity Event Class User ID Role IP address Interface Application Name Admin Domain Switch name Reserved field for future expansion Event-specific information The system time (UTC) when the message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 107
action • Message severity Gathering information about the problem Questions to ask yourself when troubleshooting a system message are as follows: • What is the current Fabric OS level? • What is the switch hardware version? • Is the switch operational? • Assess impact and urgency: - Is the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 108
switch. • Execute the supportFtp command (as needed) to set up automatic FTP transfers, and then execute the supportSave command. Support Fabric OS creates a number of files that can help support personnel troubleshoot and diagnose a problem helps to diagnose the root cause of the unexpected failure - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 109
platforms. Fibre Channel over IP port configuration message over the Brocade 7800 and FX8-24 blade. Blade management error messages are a result of autoleveling firmware upgrades performed by the control processor (CP). Condor2 error messages indicate problems with the Condor2 ASIC driver module of - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 110
the domain and alias lists to all switches in the fabric. Fabric OS system driver module. Firmware blade compatibility errors with the control processor (CP). Fibre Channel over IP port configuration messages. Fibre Channel miscellaneous messages relate to problems with the physical layer used to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 111
/connection information. Moreover, ICPD distributes iSCSI configurations not only switch-wide, but also fabric-wide. It keeps of track iSCSI VT status and updates VT status to BP. System messages generated by the IP admin demon. Fibre Channel over IP license, tunneling, and port-related messages - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 112
Switch Support daemon (essd) • FA-API rpc daemon (rpcd) • Fabric daemon (fabricd) • Fabric Watch daemon (fwd) • FCoE daemon (fcoed) • Fibre Channel daemon (spmd) • SVP daemon (svpd) • System services module daemon (ssmd) • Time Service daemon (tsd) • TRACE daemon (traced) • Traffic daemon - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 113
queue. MS The Management Service enables the user to obtain information about the Fibre Channel fabric topology and attributes by providing a single management access point. MS provides for both monitoring and control of the following areas: • Fabric Configuration Server: Provides for the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 114
. PLAT messages indicate hardware problems. A group of messages relating to logical switch creation, deletion, and configuration. PORT error messages refer to the front-end user ports on the switch. Front-end user ports are directly accessible by users to connect end devices or connect to other - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 115
informational only and are generated even during successful firmware download. For additional information, refer to the Fabric OS Administrator's Guide. These messages are generated by the switch driver module that manages a Fibre Channel switch instance. System controller is a daemon that starts up - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 116
FTRACE buffer status changes). Zeus error messages indicate problems with the Zeus driver module. The zone module messages indicate any problems associated with the zoning features, including commands associated with aliases, zones, and configurations. 30 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 117
RASLog Messages Section I This section provides the RASLog messages, including: •AG System Messages 35 •AN System Messages 47 •ANV System Messages 51 •AUTH System Messages 55 •BKSW System Messages 69 •BL System Messages 71 •BLL System Messages 87 •BLS System Messages 89 •BM System Messages - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 118
449 •HTTP System Messages 453 •IBD System Messages 455 •IBPD System Messages 457 •ICPD System Messages 459 •IPAD System Messages 463 •IPS System Messages 465 •ISNS System Messages 469 •KAC System Messages 473 •KSWD System Messages 477 •KTRC System Messages 479 •L2SYS System Messages - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 119
•MSTP System Messages 515 •NBFS System Messages 519 •NS System Messages 521 •NSM System Messages 525 •ONMD System Messages 531 •PDM System Messages 533 •PDTR System Messages 541 •PLAT System Messages 543 •PMGR System Messages 545 •PORT System Messages 549 •PS System Messages 553 •PSWP - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 120
•XTUN System Messages 741 •ZEUS System Messages 749 •ZONE System Messages 753 34 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 121
they will not respond to NPIV requests. Refer to the Access Gateway Administrator Guide, Appendix B, for specific AG-compatibility requirements. • On non-Brocade switches, refer to the manufacturer's documentation to determine whether the switch supports NPIV and how to enable NPIV on these types of - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 122
. Probable Cause Indicates the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the specified N_Port. Recommended Action Check the configuration of the fabric switch. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 123
. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING AG - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 124
on N_Port . Probable Cause Indicates there was a failure sending discover F_Port service parameter request from the Access Gateway to the fabric switch. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message persists, execute the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 125
. Recommended Action Check whether any other N_Port is configured. If the message persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportsave command and contact your switch service provider. Severity WARNING AG-1016 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 126
N_Port in port group: is online. Probable Cause Indicates that failover across port groups is not supported. Recommended Check whether an alternate N_Port is configured in this port group. Action Severity WARNING AG-1020 Message , [AG-1020], ,, INFO, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 127
to do Preferred-Failover of F_Port . Failover across different fabric is not supported. Probable Cause Indicates that failover across N_Ports connected to different fabrics is not supported. Recommended Action Change the preferred N_Port settings for this F_Port using the ag --prefset - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 128
Indicates that there are insufficient resources. Execute the configure command on the Access Gateway switch and increase the number of allowed logins on FTP transfers; then execute the supportSave command and contact your switch service provider. WARNING AG-1027 Message , [AG-1027], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 129
permission. Probable Cause Indicates the device does not have login access for that port, as per Advanced Device Security (ADS) policy set by the user. Recommended Add the device to the ADS allow list for the specified port using the ag --adsadd command. Action Severity WARNING AG-1029 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 130
mapping has been updated for N_Port (). Probable Cause Indicates that the F_Ports mapped to an N_Port have changed and the configuration file has been updated. Recommended No action is required. Action Severity INFO AG-1034 Message , [AG-1034], ,, INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 131
is connected to a Non-Brocade fabric with Persistent ALPA enabled. Check the admin guide for supported configuration. Probable Cause Indicates that one Recommended Action If the switchshow command on the connected fabric switch port displays "Persistently disabled: Area has been acquired", then - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 132
Recommended No action is required. This port reset was not an error. Action Severity the port was toggled. Check EE monitor's configuration as it might not be functional. Probable Cause , the end-to-end (EE) monitors installed with the previous PID stops functioning. Recommended Install new EE - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 133
usage on the switch using the memShow command. Restart or power cycle the Action switch. Severity ERROR AN Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference Manual service the link distance. Severity WARNING Fabric OS Message Reference 47 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 134
the specified port, a downstream port, or a very high latency device at the edge of the fabric. Recommended Contact your vendor's customer support for assistance. Action Severity WARNING AN-1011 Message Probable Cause , [AN-1011], ,, WARNING, , Could not - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 135
not followed by an AN-1013 message, please contact your vendor's customer Action support for assistance. Severity WARNING AN-1013 Message , [AN-1013], ,, WARNING, , Performed link reset to recover the port credits on slot port - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 136
3 AN-1013 50 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 137
fibre channel cable is not faulty. Replace the SFPs or the cable, if necessary. Severity ERROR ANV-1002 Message , [ANV-1002], , FFDC, ERROR, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 138
1004], ,, ERROR, , S,C: Invalid DMA ch pointer, chan:, good_addr:0x bad_addr maintenance window. If the problem persists, replace the switch or Action contact your switch service provider. Severity ERROR ANV-1006 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 139
specified port was reinitialized due to link reset failure. Recommended Power cycle the faulted blade. If the problem persists, replace the faulted blade. Action Severity WARNING ANV-1016 Message , [ANV-1016], ,, WARNING, , Port is faulted due to port - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 140
4 ANV-1016 54 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 141
and contact your switch service provider. Severity ERROR AUTH-1003 Message Probable Cause , [AUTH-1003], ,, INFO, , type has been successfully set to . Indicates that an authentication configuration - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 142
run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1006 Message , [AUTH-1006], ,, WARNING, , Failed to open authentication configuration file. Probable Cause Indicates an internal problem with the Secure Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 143
AUTH-1008 5 Recommended Action Run the authUtil command to make sure the local switch supports the specified protocols: Fibre channel authentication protocol (FCAP) or Diffie Hellman - challenge handshake authentication protocol (DH-CHAP). Severity ERROR AUTH-1008 Message , [AUTH- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 144
support authentication. Recommended Make sure the entity at the other end of the link supports Recommended Action Usually this problem is transient. The authentication ; then run the supportSave command and contact your switch service provider. Severity WARNING AUTH-1014 Message , - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 145
your Action switch service provider. Severity ERROR AUTH-1017 Message , [AUTH-1017], ,, ERROR, , Invalid value to start authentication request: port , operation code . Probable Cause Indicates an internal problem with the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 146
and contact your switch service provider. Severity problem switch link authentication protocol (SLAP): certificate retrieve, certificate verification, signature verification, or nonce signing. • Some operations for fibre channel reset the secret value for DH-CHAP properly. 60 Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 147
run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1026 Message Recommended Action Usually this problem is transient. If switch does not support the specified authentication value. Recommended Check the authentication configuration and reset the supported - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 148
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1028 Message , [AUTH-1028], failed to get memory. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 149
; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1031 Message , for the authenticated entity. Recommended Action Reset the secret value by using the attacks. Recommended Action Usually this problem is transient. The authentication - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 150
unauthorized switch . Probable Cause Indicates that an entity was not configured in the switch connection then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1035 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 151
Indicates that the switch received an unexpected authentication message. Recommended Action Usually this problem is transient. up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1037 Message , [AUTH-1037], < - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 152
port, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch using the portEnable the supportSave command and contact your switch service provider. Severity ERROR 66 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 153
your switch service provider. defaulted to OFF, and switch will not participate in Diffie Hellman - challenge handshake authentication protocol (DH-CHAP) authentication with devices. Recommended Try setting the device authentication policy manually result. This problem may be transient - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 154
not installed in this switch. Recommended Action Check the certificate availability using the pkiShow command. Install the up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1046 Message , [AUTH-1046], < - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 155
switches) or fail over (on dual-CP switches). The Warning message variable will be one of the following: • Detected unexpected termination of: daemon name One of the critical daemons ended command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 69 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 156
6 BKSW-1003 70 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 157
system-name>, Port initialization completed. Probable Cause Indicates that the switch has completed initializing the ports. Recommended No action is required the blade is seated correctly, restart or power cycle the blade. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 158
a failure but was not faulted due to a user setting. Recommended Action Restart or power cycle the blade, using the slotPowerOff and slotPowerOn has experienced transitory problems. Recommended Use the haShow command to verify that the standby CP is healthy. If problem persists remove and Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 159
) chips. Recommended Action Make sure that the blade is seated correctly. If the blade is seated correctly, reboot or power cycle the blade. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more information on these commands - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 160
Power-On Self-Test (POST) is enabled. On a bladed switch, run the slotPowerOff and slotPowerOn commands. On a nonbladed switch, restart or power cycle the switch is the blade port; this number might not correspond to a user port number. Recommended Action Make sure to capture the console output - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 161
not correspond to a user port number. Recommended switch, reboot the switch. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If there is a hardware error, if the slotPowerOff or slotPowerOn fails on the bladed switch or if errors are encountered again: • On the Brocade - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 162
commands. On a nonbladed switch, reboot the switch. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If there is a hardware error, if the slotPowerOff or slotPowerOn fails on the bladed switch or if errors are encountered again: • On the Brocade 24000, and 48000, replace - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 163
has failed to initialize the application-specific integrated circuit (ASIC) chips. Recommended Action Restart or power cycle the switch. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more information on these commands - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 164
not online. The switch is faulted. Recommended Action Restart or power cycle the switch. Run the diagPost command to ensure that Power-On Self-Test ( Cause Indicates that the blade was reset before the initialization completed. Recommended Action Restart or power cycle the blade. If the message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 165
GbE or Fibre Channel over IP (FCIP) or Virtualization data elements or FC Fastwrite ports were reset. Recommended No action is required. Action Severity INFO BL-1026 Message , [BL-1026], ,, CRITICAL, , Internal port offline during warm recovery, state - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 166
/FC Fastwrite ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all the GbE or Fibre Channel over IP - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 167
-end (non-user) ports have not come ONLINE within time limit. Recommended Restart or power cycle the blade. Run the diagPost command to ensure that Power >, Slot FC Initialization completed. Indicates that the slot has completed initializing Fibre Channel (FC) ports. Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 168
Probable Cause , [BL-1038], ,, CRITICAL, , Inconsistent FPGA image version detected, please reboot the switch for recovery. Indicates that the FPGA image version is incompatible with the software version. 82 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 169
it> in slot as it does not support this mode. Probable Cause Indicates that the blade does not support dynamic area mode on default switch. Recommended Turn off the dynamic area mode through Configure CLI. Action Severity CRITICAL BL-1045 Message , [BL-1045], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 170
Port (). Try reseating or is enabled on the switch. Probable Cause Indicates that the interop mode is turned on in the default switch while powering on the FCoE blade - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 171
Blade Processor FPGA version with FOS7.0 firmware on 7800. Contact support for upgrade instructions. Probable Cause Indicates that the blade processor FPGA version with Fabric OS v7.0.0 firmware is incompatible on the Brocade 7800 switch. Recommended Contact your switch service provider for - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 172
7 BL-1051 86 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 173
driver detected Slot port as faulty (reason: ). Probable Cause Indicates that a blade regulation problem error • 11 = CMI interrupt error • 12 = Interrupt overrun • 13 = FDET interrupt power cycle the Action blade. Fabric OS Message Reference 87 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 174
diagPost command to make sure that Power-On Self-Test (POST) is enabled; then power cycle the blade using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. Severity CRITICAL 88 Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 175
a FIPS failure has occurred and requires faulting the blade or switch. Recommended Retry the command. Action Severity CRITICAL BLS-1002 Message that an IPsec or IKE policy was added and the configuration file was updated. Recommended No action is required. Action Severity INFO Fabric - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 176
Tape Read Pipelining is being disabled slot () port () tunnel (). Probable Cause Indicates that the FOS version on the remote end of the tunnel does not support the Tape Read Pipelining feature. Recommended No action is required. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 177
on the application processor (AP) blade. You can modify the firmware version on the CP blade by using the firmwareDownload command. Refer to the release notes to determine whether a non-disruptive firmware download is supported between the revisions. Because the AP and CP blades cannot communicate - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 178
reseat the affected blade. On the Brocade Action 7500 or 7600, switch off and switch on all primary power to power-cycle the unit. Severity WARNING BM-1006 Message , [BM-1006], ,, INFO, , Blade is not configured. Persistently disabling all ports for blade - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 179
the affected blade. On the Brocade Action 7500 or 7600, switch off and switch on all primary power in order to power-cycle the unit. Severity WARNING BM-1010 Message Probable Cause , [BM-1010], ,, INFO, , Resetting port configuration and linkcost for all - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 180
version of the firmware loaded. Recommended No action is required. The blade will automatically download the updated firmware. Action Severity INFO BM-1055 Message , [BM-1055], ,, WARNING, , Firmwaredownload timed-out for AP. Faulting switch. Probable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 181
• The switch was configured under a different mode. Recommended Configure the switch to persistently enable all ports. Action Severity INFO BM-1058 Message , [BM-1058], ,, WARNING, , Download of AP firmware failed for the switch. Reissue firmwaredownload - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 182
10 BM-1058 96 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 183
configuration. Probable Cause Indicates a deteriorated SFP, an incompatible SFP pair, or a faulty cable between the peer ports. Recommended Verify that you are using compatible SFPs on the peer ports. Verify that the SFPs have not Action deteriorated and the Fibre Channel switch problem Action persists - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 184
internal hardware reported errors. There is no action required by the user at this time. If any actual hardware failures are detected, a be turned off at next port state change as it is not supported under this configuration. Probable Cause Indicates QoS will be turned off automatically at the next - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 185
is no traffic on that port for two seconds. Recommended Turn on the back-end credit recovery to reset the link and recover the lost credits. If credit recovery Action has already been turned on, the link will be reset to recover the credits and no action is required. Severity WARNING Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 186
lost>. Probable Cause Indicates that one or more credits are lost and the link is reset. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity WARNING C2-1015 Message Message , [C2-1015 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 187
value exceeded. Probable Cause Indicates that blade is faulted due to Link reset threshold exceeded. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity ERROR C2-1019 Message Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 188
11 C2-1019 102 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 189
configuration. Probable Cause Indicates a deteriorated small form-factor pluggable (SFP), an incompatible SFP pair, or a faulty cable between the peer ports. Recommended Verify that compatible SFPs are used on the peer ports, the SFPs have not deteriorated, and the Action Fibre Channel or switch - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 190
12 C3-1006 C3-1006 Message , [C3-1006], ,, WARNING, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 191
C3-1010 12 Recommended No this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. end credit recovery to reset the link and recover the lost credits. If credit recovery Action has already been turned on, the link will be reset - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 192
12 C3-1013 -end credit recovery to reset the link and recover the lost credits. If credit recovery Action has already been turned on, the link will be reset the link is reset. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 193
C3-1017 12 Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Link reset threshold exceeded. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 194
>): Port offline due to Encryption Compression Block error. Probable Cause Indicates that an internal error is observed in the ASIC hardware that may degrade the data traffic. Recommended Whenever this error occurs, software recovers from the error. If the problem persists, replace the Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 195
Chapter CAL System Messages 13 CAL-1001 Message , [CAL-1001], ,, INFO, , Switch offline requested by remote domain . Probable Cause Indicates a remote domain has requested the local domain to be disabled. Recommended See remote domain - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 196
13 CAL-1001 110 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 197
Enhanced Ethernet (CEE) configuration management daemon has failed. Recommended Download a new firmware version using the firmwareDownload command is ready to accept CEE user commands. Probable Cause Indicates that the CEE shell is ready to accept configuration commands. Recommended No action is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 198
. Action Severity INFO CCFG-1007 Message , [CCFG-1007], ,, INFO, , Startup configuration is deleted. Probable Cause Indicates that the startup configuration file has been moved or deleted. Recommended No action is required. Action Severity INFO 112 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 199
CCFG-1009 Message , [CCFG-1009], ,, INFO, , Successfully copied to . Probable Cause Indicates that a configuration file has been copied to the specified destination. Recommended No action is required. Action Severity INFO CCFG-1010 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 200
14 CCFG-1012 CCFG-1012 Message , [CCFG-1012], ,, ERROR, , Blade in slot failed to reach ONLINE state within seconds after receiving system ready. Probable Cause Indicates that the blade in the specified slot has failed to come online - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 201
configuration does not match the capability of the SFP. Recommended Action Ensure that you are using compatible SFPs on the peer ports. Verify whether the SFPs have not deteriorated and the Fibre Channel command on the switch to recover the system the problem persists, blade may need to be reset or - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 202
index>: Invalid DMA ch pointer, chan:, good_addr:0x, bad_addr: at the next maintenance window. If the problem Action persists, replace the blade. Severity port state change as it is not supported under this configuration. Probable Cause Indicates QoS will be turned - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 203
above normal errors observed in hardware that may or may not impact data traffic. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity CRITICAL Fabric OS Message Reference 117 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 204
back-end credit recovery to reset the link and recover the lost credits. If credit recovery Action has already been turned on, the link will be reset to the link is reset. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 205
value exceeded. Probable Cause Indicates that blade is faulted due to Link reset threshold exceeded. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity ERROR CDR-1019 Message Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 206
15 CDR-1019 Recommended Whenever this error occurs, restart the system at the next maintenance window. Action Severity WARNING 120 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 207
active and standby control processors (CPs) is broken, because there is downlevel firmware loaded on the standby CP. The standby CP does not support the Advanced Performance Tuning module when the fibre connectivity (FICON) Management Server is enabled. Recommended Action Run the firmwareDownload - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 208
16 CER-1001 122 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 209
been detected as inconsistent during failover or recovery. Recommended On a Brocade 24000 or 48000 switch, run the slotPowerOff command followed by the slotPowerOn Action command. On a Brocade 7500 or AP7600 switch, reboot or power cycle the switch. Severity ERROR CHS-1004 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 210
failover or recovery. Recommended Action On a Brocade 24000 or 48000 switch, run the slotPowerOff command followed by the slotPowerOn command. On a Brocade 200E, 3250, 3850, 3900, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, or AP7600 switch, reboot or power cycle the switch. Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 211
a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference Manual for more information on this command. Severity ERROR CNM-1003 Message , [CNM-1003], ,, WARNING, , Crypto device configuration between local switch - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 212
-1004 Message , [CNM-1004], ,, INFO, , iSCSI service is on the switch. Probable Cause Indicates that the Crypto service is enabled or disabled on the switch. Recommended No action is required. Action Severity INFO CNM-1005 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 213
INFO, , Posting event CNM_EVT_NODE_EJECT nodeName [], wwn []. Probable Cause Indicates that the node is ejected from the Encryption Group (EG). Recommended No action is required. Action Severity INFO CNM-1009 Message , [CNM-1009], ,, INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 214
sequence-number>,, INFO, , Posting event GL Node Split condition, isolating peer GL node . Probable Cause Indicates that the Encryption Group (EG) is split. Recommended No action is required. Action Severity INFO CNM-1014 Message , [CNM-1014], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 215
event Detected a EG degrade condition. Probable Cause Indicates an Encryption Group (EG) degrade condition. Recommended No action is required system-name>, Got JOIN REQUEST from un-recognized GL node [], configured GL node is []. Probable Cause Indicates a join request was - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 216
18 CNM-1020 CNM-1020 Message , [CNM-1020], ,, INFO, , Node Admission Control failed, due to mismatch in certificates, rejecting node []. Probable Cause Indicates that the Node Admission Control has failed. Recommended No action is required. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 217
, , Received HBT Message with version mismatch, Recvd Hdr version Exp Hdr version Node . Probable Cause Indicates that a version mismatch has occurred. Recommended Upgrade the firmware or delete the Node from the Encryption Group (EG). Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 218
18 CNM-1028 CNM-1028 Message , [CNM-1028], ,, INFO, , Certfile already exists. No need to sync up. Probable Cause Indicates that the certificate file for the node already exists. Recommended No action is required. Action Severity INFO CNM-1029 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 219
required. Action Severity WARNING CNM-1034 Message , [CNM-1034], ,, INFO, , All the defined nodes in the Encryption Group are ONLINE. Cluster is in converged state. Probable Cause Indicates that the cluster is in a converged state. Recommended No action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 220
18 CNM-1036 CNM-1036 Message , [CNM-1036], ,, INFO, , All the active nodes of the cluster are in ONLINE state. Posting converged event. Probable Cause Indicates an event is being posted to indicate that the cluster is in a converged state. Recommended No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 221
system-name>, Updating persistent Cluster DB, please avoid powering off the switch. Probable Cause Indicates the system is updating the system-name>, Received HBT from undefined node IpAddress [], WWN []. Possible configuration error. Probable Cause Indicates that the remote node - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 222
an EG with only IPV6 is not allowed. Probable Cause Indicates that the member node with a dual IP stack was registered with an IPV6 Encryption Group (EG). Recommended No action is required. Action Severity ERROR CNM-1046 Message , [CNM-1046], ,, INFO, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 223
Access Gateway Daemon mode mismatch, ensure mode settings are same across all nodes in EG. Probable Cause Indicates mode mismatch between the switches like the Access Gateway mode mismatch. Recommended No action is required. Action Severity ERROR Fabric OS Message Reference 137 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 224
is required. Action Severity ERROR CNM-1054 Message , [CNM-1054], ,, INFO, , Encryption Group database state [] with node ip [], wwn []. Probable Cause Indicates the status of the cluster database. Recommended No action is required - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 225
sequence-number>,, INFO, , Posting event CNM_EVT_EE_INITIALIZING Slot [], Wwn [], IP [], flags []. Probable Cause Indicates that the Encryption Engine (EE) is added into the Encryption Group (EG). Recommended No action is required. Action Severity INFO CNM-1057 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 226
INFO, , IP of the switch changed from [] to []. Probable Cause Indicates that the switch IP has changed. Recommended Status: success, Info: encryption group \\ created. Probable Cause Indicates an encryption group was created. Recommended No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 227
CNM-3002 Message , [CNM-3002], ,, INFO, , Event: cryptocfg Status: success, Info: encryption group deleted. Probable Cause Indicates an encryption group was deleted. Recommended No action is required. Action Severity INFO CNM-3003 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 228
-name>, Event: cryptocfg Status: success, Info: Routing mode of EE in slot set to . Probable Cause Indicates that the Encryption Engine (EE) routing mode was set. Recommended No action is required. Action Severity INFO CNM-3009 Message , [CNM-3009], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 229
sequence-number>,, INFO, SECURITY , Deleteing an EG with luns setup for encryption can lead to luns being disabled if Encryption Group name is not preserved (). Probable Cause Indicates that the Encryption Group (EG) was deleted, recreate EG with the same name if luns are setup - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 230
18 CNM-3012 144 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 231
was initiated and completed successfully. The Info about the parameters and AD variable is the description of the classes of configuration parameters that were downloaded. If Admin Domain (AD) is enabled, the AD number is specified in the description. Recommended No action is required. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 232
timestamp>, [CONF-1022], ,, WARNING, , Downloading configuration without disabling the switch was unsuccessful. Probable Cause Indicates an attempt to download the configuration without disabling the switch was unsuccessful because there are one or more parameters that - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 233
changes associated with the specified key have not been applied. Recommended Action Use the configure command and various other commands to erase configuration parameters that are no longer required. As a last resort, execute the configDefault command and reconfigure the system. Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 234
CONF-1042 Message , [CONF-1042], ,, INFO, , Fabric Configuration Parameter changed to . Probable Cause Indicates that the fabric configuration parameter value has been changed. Recommended No action is required. Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 235
Chapter CTAP System Messages 20 CTAP-1001 Message , [CTAP-1001], ,, INFO, , Key acquisition for . Probable Cause Indicates that a change in the tape pool database has triggered the key acquisition process for each - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 236
20 CTAP-1001 150 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 237
System Messages 21 CVLC-1001 Message , [CVLC-1001], ,, INFO, , re-key , LUN SN: . Container: , Initiator - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 238
Initiator physical WWN>. Probable Cause Indicates that there is more than one LUN serial number discovered from the same target. Therefore, encryption on this target is disabled. Recommended No action is required. Action Severity WARNING CVLC-1007 Message Probable Cause , [CVLC-1007 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 239
1008 21 Recommended Action If you want to preserve the user data, use cryptocfg --modLUNpolicy -cleartext to convert to clear that the tape container is configured with non-Brocade mode but there is no valid license. Recommended Obtain license for non-Brocade mode. Action Severity ERROR Fabric - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 240
: , LUN ID: . Probable Cause Indicates that the encryption LUN is configured with non-Brocade mode but there is no valid license. Recommended Obtain license for non-Brocade mode. Action Severity ERROR CVLC-1012 Message , [CVLC-1012], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 241
-number>,, ERROR, , Missing Key ID from user input. Container: , Initiator: , LUN ID: . Probable Cause Indicates that the data state in the LUN configuration is in the encrypted state without a key ID and there is no metadata - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 242
is in clear text state but metadata exists on the LUN. Recommended Use cryptocfg command to confirm the configuration. Action Severity ERROR CVLC-1020 Message , [CVLC-1020], ,, ERROR, , Metadata exists while LUN is clear text. Container: - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 243
-1022], ,, INFO, , User provided key ID is ignored while data state is clear text. Container EE: . Probable Cause Indicates that due to container configuration changes, weights are not balanced on OB1s. Recommended Run cryptocfg - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 244
No action is required. Action Severity INFO CVLC-1027 Message , [CVLC-1027], ,, ERROR, , Encrypted LUN configured with -newLUN option does not contain any metadata. Container: , Initiator: , LUN ID: - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 245
be out of sync with mirror LUN. Container: , Initiator: , LUN ID: . Probable Cause Indicates the manual rekey was completed on primary LUN. Recommended Action 1. Make the target ports of the mirror LUN offline to hosts. 2. Re-establish the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 246
a new primary LUN. 2. Add it to its container with -newLUN option. 3. Using host based migration application, copy data from old to new because . Indicates the First time encryption, Key expired or Manual re-key operation failed. 160 Fabric OS Message Reference 53-1002448 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 247
INFO CVLC-1035 Message , [CVLC-1035], ,, ERROR, , A decommissioned LUN has been added back as encrypted LUN. Container , Initiator: , LUN ID: . Probable Cause Indicates that decommissioned LUN has - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 248
21 CVLC-1041 162 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 249
firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference Manual for more information on this command. Severity ERROR CVLM-1003 Message , [CVLM-1003], ,, INFO, , Crypto device configuration has been committed by switch - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 250
CVLM-1004 Message , [CVLM-1004], ,, WARNING, , Crypto device configuration between local switch () and peer () is out of sync. New encryption session is not allowed. Probable Cause Indicates that EE nodes in the cluster - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 251
of EE ( ) IO link is not configured. Probable Cause Indicates that the EE IO link IP address is not configured. Recommended Configure the EE IO link IP address. Action Severity WARNING CVLM-1011 Message , [CVLM-1011], ,, INFO, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 252
22 CVLM-1012 CVLM-1012 Message , [CVLM-1012], ,, INFO, , The HAC failback occurs at EE ( ). Probable Cause Indicates that the HAC failback occurs at the EE. Recommended No action is required. Action Severity INFO CVLM-3001 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 253
CVLM-3004 22 CVLM-3004 Message , [CVLM-3004], ,, INFO, , Event: cryptocfg Status: success, Info: Cluster member added to HA cluster . Probable Cause Indicates an HA cluster member was added to an HA cluster. Recommended No action is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 254
number>,, INFO, , Event: cryptocfg Status: success, Info: Manual failback from EE / to EE /. Probable Cause Indicates a manual failback was performed to an encryption engine. Recommended No action is required. Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 255
CVLM-3012 22 Recommended No action is required. Action Severity INFO CVLM-3012 Message , [CVLM-3012],,, INFO, , Event: cryptocfg Status: success, Info: Initiator \\ removed from crypto target container \\. Probable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 256
22 CVLM-3015 CVLM-3015 Message , [CVLM-3015], ,, INFO, , Event: cryptocfg Status: success, Info: Lun , attached through Initiator \\, removed from crypto target container \\. Probable Cause Indicates a LUN was - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 257
Message , [CVLM-3021], ,, INFO, , Event: cryptocfg Status: success, Info: Manual rekey all performed. Probable Cause Indicates a complete manual rekey was performed. Recommended No action is required. Action Severity INFO CVLM-3022 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 258
22 CVLM-3023 CVLM-3023 Message , [CVLM-3023], ,, INFO, , Event: cryptocfg Status: success, Info: Transaction committed. Probable Cause Indicates a transaction commit operation was performed. Recommended No action is required. Action Severity INFO CVLM- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 259
CVLM-3027 22 CVLM-3027 Message , [CVLM-3027], ,, INFO, , Event: cryptocfg Status: success, Info: Decommission of device (container initiator , LUN ). Probable Cause Indicates that the decommission operation has - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 260
22 CVLM-3028 174 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 261
Chapter DAUTH System Messages 23 DOT1-1001 Message , [DOT1-1001], ,, INFO, 802.1X is enabled globally. Probable Cause Indicates that 802.1X is enabled globally. Recommended No action is required. Action Severity INFO DOT1-1002 Message , [DOT1-1002], < - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 262
on port . Probable Cause Indicates that the authentication has failed on the specified port. Recommended Check the credentials configured with the Supplicant and RADIUS servers. Action Severity WARNING DOT1-1007 Message , [DOT1-1007], ,, CRITICAL, No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 263
DOT1-1009 23 Recommended No action is required. Action Severity INFO DOT1-1009 Message , [DOT1-1009], ,, INFO, 802.1X is disabled for port . Probable Cause Indicates that 802.1X is disabled for a specified port. Recommended No action is required. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 264
23 DOT1-1010 178 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 265
ECC System Messages 24 ECC-1000 Message corrected, but other errors indicate either software errors or problems with the target system DRAM. Single bit errors can and all other error types should be reported to technical support for Action further action. Severity ERROR ECC-1001 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 266
24 ECC-1001 180 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 267
range of the switch. Refer to the Hardware Reference Manual for the environmental temperature range of your switch. Execute the fanShow . Recommended Action On Brocade 24000 and 48000, reseat the specified FRU. If the problem persists, restart or power cycle the switch. Fabric OS Message Reference - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 268
of a FRU type string and an optional number to identify the unit, slot, or port. The Brocade 3250 has one power supply and three fans, and the Brocade 3850 has two power supplies and four fans. Values for the individual fans and power supplies for these switches may display, but these parts cannot - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 269
Probable Cause Indicates that a blade inserted in the specified slot or the switch (for nonbladed switches) is not compatible with the platform configuration (includes the firmware version) or the switch configuration. The blade is faulted. Recommended Action If the blade is incompatible, upgrade - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 270
. Indicates that the specified switch blade or nonbladed switch failed to transition from one state to another. It is faulted. The specific failed target state is displayed in the message. There are serious internal Fabric OS configuration or hardware problems on the switch. 184 Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 271
the original equipment manufacturer (OEM) data in the memory of recovery failed (). Probable Cause Indicates that a problem was discovered when performing consistency checks during a warm boot. Recommended Monitor the switch. If the problem persists, restart or power cycle the switch - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 272
-name>, Current chassis configuration option () is not compatible with standby firmware version (Pre 4.4), cannot allow HA Sync. Probable Cause Indicates that the current chassis configuration option is not supported by the firmware on the standby control - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 273
a FRU type string and an optional number to identify the unit, slot, or port. Recommended Action If the problem persists, restart or power cycle the switch. If the problem still persists, replace the WWN card, or the switch (for nonbladed switches). Severity WARNING EM-1029 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 274
appropriate Hardware Refernce Manual for instructions on inserting the switch blades. Severity power cycle the blade using the slotPowerOff and slotPowerOn commands or have the blade's ejector switch cycled to run POST and verify that the blade does not have any hardware problems. If the problem - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 275
-replaceable unit (FRU) is not present on the switch. If the FRU is a World Wide Name (WWN) card, the default WWN and IP addresses are used for the switch. Recommended Action Reseat the FRU. If the problem persists, restart or power cycle the switch. Execute the diagPost command to make sure that - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 276
problem persists, replace the FRU. Action Severity WARNING EM-1043 Message , [EM-1043], ,, WARNING, , Can't power sequence-number>,, WARNING, , Can't power on , its logical switch is shut down Probable Cause Indicates that the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 277
power supplies for redundancy. Severity WARNING EM-1046 Message , [EM-1046], ,, WARNING, , Sysctrl reports error status for blade ID for the blade in slot - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 278
number>,, INFO, , I2C access recovered: state Probable Cause Indicates that the Inter-Integrated Circuit (I2C) bus problems have been resolved and I2C access to the field-replaceable unit (FRU) has become available again. Recommended No action is required. The - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 279
Message , [EM-1058], ,, WARNING, , Switch gets reset:. Probable Cause Indicates that the switch is being automatically reset because of a known resetable transient problem such as an application-specific integrated circuit (ASIC) parity error - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 280
with ID may not be supported on this platform, check FOS firmware version as a possible cause. Probable Cause Indicates that a blade inserted in the specified slot or the switch (for nonbladed switches) is incompatible with the switch configuration software. The system may not be usable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 281
CRITICAL, , Blade: is being powered off (based on user configuration) upon receiving a HW ASIC ERROR, reason:. you have selected to power off the problem blade when such a condition occurred. Recommended Contact your switch service provider for assistance. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 282
OS firmware version. Recommended Action Upgrade the software on the standby CP or disable the software feature on this CP. To disable the Ethernet switch service, execute serious internal Fabric OS configuration or hardware problems on the switch. 196 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 283
power cycle the switch. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service Determine which blade is essential to your configuration and remove blades that are incompatible Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 284
log file you must be logged in at the root level. The ID will be Switch for nonbladed systems. Recommended Action On bladed systems, reseat the specified FRU. On nonbladed switches, restart or power cycle the switch. If the problem persists, perform the following actions: • Execute the diagPost - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 285
Action Discontinue the firmware download, identify the downlevel switch or switches that do not support the Coordinated HotCode protocol, and upgrade the downlevel switches. Then, restart the firmware download on this switch. Note that upgrading a downlevel Brocade switch in a mixed interop - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 286
disruption observed during the firmware download may have been due to this issue. Recommended No action is required. Action Severity WARNING ESS-1008 Message , [ESS-1008], ,, INFO, , Fabric Name configured (received from domain - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 287
name and set it again from any switch. Action Severity WARNING ESS-1010 Message , [ESS-1010], ,, WARNING, , Duplicate Fabric Name - matching with FID . Probable Cause Indicates that the configured fabric name is already used for - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 288
26 ESS-1010 202 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 289
Action transfers; then run the supportSave command and contact your switch service provider. Severity ERROR ESW-1002 Message , [ESW-1002 inconsistent during failover or recovery. Recommended On a Brocade 8000 switch, restart or power cycle the switch. Action Severity ERROR Fabric - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 290
or recovery. Recommended On a Brocade 8000 switch, restart or power cycle the switch. Action Severity ERROR ESW-1006 Message , [ESW-1006], ,, WARNING, , HA state out of sync: Standby CP (ver = ) does not support NPIV functionality - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 291
Recommended Action Indicates that the blade has area swapped ports on ports that do not support this feature. Replace the blade with ports that support port swap. Refer to the Fabric OS Administrator's Guide for more information. Severity WARNING Fabric OS Message Reference 205 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 292
27 ESW-1008 206 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 293
EVMD System Messages 28 EVMD-1001 Message , [EVMD-1001], ,, WARNING, , Event could not be sent to remote proxy. = . Probable Cause Indicates the event could not be sent to remote proxy. This could happen if the remote proxy - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 294
28 EVMD-1001 208 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 295
within the message, look for a possible mismatch of relevant configuration parameters in the switches at both ends of the link. Run the configure command to modify the appropriate switch parameters on both the local and remote switch. Severity WARNING FABR-1002 Message , [FABR-1002 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 296
FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1004 Message , [FABR-1004 incoming data, the system will discard the frame. If it is due to problems with the kernel, the system will recover by performing a failover. If the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 297
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1007 Message , [FABR-1007], information unit. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action In case of severe - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 298
message is rare and usually indicates a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FABR-1011 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 299
problem with the Fabric OS. Recommended Action The system will recover by failing over to the standby CP. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service and the configure command to change - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 300
Probable Cause Indicates that FICON mode is disabled on the switch through a user interface command. Recommended No action is required. Action Severity (WWN). Recommended Action Make sure that no other switch is configured as the principal switch. Force a fabric rebuild by using the switchDisable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 301
FABR-1019], , FFDC, CRITICAL, , Critical fabric size () exceeds supported configuration (). Probable Cause Indicates that this switch is a value-line switch and has exceeded the limited fabric size: that is, a specified limit to the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 302
within the licensed limit. Contact your switch provider to obtain a full fabric license. Severity CRITICAL FABR-1023 Message , [FABR-1023], ,, INFO, , Fabric size is within supported configuration (). Fabric limit timer () stopped - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 303
port at the other end of the link. The Fibre Channel standard protocol, that uses R_RDY primitive for flow control. • DUAL_CR mode: Dual-credit flow control mode. In both of the previous modes, the buffer credits are fixed, based on the port configuration sending internal link service (ILS) to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 304
switch with an unsupported Fabric OS version 2.x has joined the fabric. Recommended Remove the switch with the unsupported Fabric OS version Area. You must manually enable the port or the port remains disabled forever. Refer to the Fabric OS Administrator's Guide for more information. Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 305
the port attempts to go online, the Switch finds that Trunk Area enabled is incompatible with port configuration such as long distance, port mirror, fast trunking is enabled without a trunking license being present. Recommended Install a trunking license or disable F_port trunking on the port. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 306
Cause Indicates a link reset was received before the and contact your switch service provider. Severity ERROR switch is not adjacent to the local switch. Recommended Make sure that all the switches in the fabric have the same Fabric ID or upgrade the switch Action firmware to a VF-capable firmware - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 307
. All the E_ports directly connected to the conflicting switch are disabled. Recommended Make sure that all the switches in the fabric have the same Base Switch attribute or upgrade the Action switch firmware to a VF-capable firmware. Severity ERROR Fabric OS Message Reference 221 53-1002448 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 308
port during port creation. Recommended Move some ports out of the default switch to make areas available. Action Severity INFO FABR-1048 Message switch. Recommended Make sure that all the switches in the fabric have same Fabric ID or upgrade the switch firmware to Action a VF-capable firmware - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 309
FABR-1051 29 Recommended Install the required license. Action port . Probable Cause Indicates that the configured speed (16G/10G on FC16 blade or 1G on FC16 blade) switch.interopMode and switch.mcdtFabricmode set. Recommended Execute the interopmode command to reset - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 310
29 FABR-1054 FABR-1054 Message , [FABR-1054], , FFDC, INFO, , Rebooting the standby as it received an update before port [] is expanded. Probable Cause Indicates that the standby CP did not have the port because the port expand operation is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 311
by the software. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1004 Message , [FABS-1004], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 312
driver Recommended Action If the message is isolated, monitor the error messages on the switch. reboot the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity problem or file corruption. Recommended Reboot or power cycle the switch. Action 226 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 313
unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1011 Message Probable Cause , [FABS-1011 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 314
not be supported by this platform or Fabric OS version. Recommended Action Verify that the blade is valid for use in this system and this version of Fabric is usually an internal Fabric OS problem. Recommended Action Try removing and reinserting the FRU. Reboot or power-cycle the CP or system. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 315
FABS-1015 30 If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR Fabric OS Message Reference 229 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 316
30 FABS-1015 230 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 317
a non-disruptive firmwareDownload is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP blade. If required, send the AP blade back to the factory to get a new firmware version installed. Severity ERROR Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 318
31 FBC-1001 232 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 319
> type= slot=. Probable Cause Indicates that an FIPS failure has occured and requires faulting the blade or switch. Recommended Retry the command. Action Severity CRITICAL FCIP-1002 Message , [FCIP-1002], , INFO, , An IPsec - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 320
Tape Read Pipelining is being disabled slot () port () tunnel (). Probable Cause Indicates that the FOS version on the remote end of the tunnel does not support Tape Read Pipelining. Recommended No action is required. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 321
is low on memory and failed to allocate new memory for an information unit (IU). Recommended A nonbladed switch will automatically reboot. For a bladed switch, the active CP blade will Action automatically fail over and the standby CP will become the active CP. Severity CRITICAL Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 322
33 FCMC-1001 236 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 323
1001], ,, ERROR, , calloc failed for . Probable Cause Indicates a memory failure. Recommended Check the switch memory status. Action Severity ERROR FCOE-1002 Message , [FCOE-1002], ,, WARNING, , Max logingroup limit - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 324
34 FCOE-1005 Recommended Remove the failed member from the logingroup. Action Severity ERROR FCOE-1005 Message , [FCOE-1005], ,, ERROR, , : membership check failed in logingroup: Probable Cause Indicates that the Membership check for the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 325
FCOE-1010 34 Recommended Remove unwanted nport mappings and try adding nport mapping. Action Severity INFO FCOE-1010 Message , [FCOE-1010], ,, ERROR, , Cleanup of login failed for port:. Probable Cause Indicates an invalid port number. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 326
34 FCOE-1015 Recommended Request to add ports to VLAN failed. Action Severity ERROR FCOE-1015 Message , [FCOE-1015], ,, ERROR, , Request to add MACs to Layer 2 for ifindex 0xx failed, rc:. Probable Cause Indicates that an add request to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 327
as FC-MAP not configured on FCOE VLAN. Probable Cause Indicates that the FC-MAP has not been configured on FCOE VLAN. Recommended Configure FC-MAP Max FCoE device login limit reached. Probable Cause Indicates that the switch has reached its maximum allowed FCoE device limit. Recommended Do not - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 328
received from Enode without prior FLOGI. Probable Cause Indicates that no root Nport has logged in. Recommended No action is required. Action FDISCs that was received on the switch does not match the original FLOGI. Recommended It is due to a CNA or target driver issue. No action is required - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 329
FCoE login group policy on the switch for the device to login. Action Severity ERROR FCOE-1029 Message , [FCOE-1029], ,, WARNING, , Version mismatch between FIP FDISC and root VN port. Probable Cause Indicates a version mismatch between the FLOGI and the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 330
on priority for which PFC or FCOE is disabled. Recommended Configure as required. Action Severity WARNING FCOE-1037 Message Probable Cause dropped for switch wwn: , due to name conflict while merging. Indicates that same logingroup name exists for two different switches that have - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 331
created. Probable Cause Indicates that the logingroup is added in the switch logingroup table. Recommended No action is required. Action Severity INFO FCOE -name>, Transaction aborted. Indicates that the ongoing configuration transaction is aborted. Fabric OS Message Reference 245 53-1002448- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 332
INFO FCOE-1044 Message , [FCOE-1044], ,, INFO, , FCoE login configuration management enabled. Probable Cause Indicates that the FCoE login configuration management is enabled. Recommended No action is required. Action Severity INFO FCOE-1045 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 333
not match. The fcoed.conf file is truncated and updated with a new magic number. Recommended Reconfigure the FCoE ports as all the port configurations will be lost. Action Severity INFO FCOE-1047 Message , [FCOE-1047], ,, INFO, , fcoed.conf file is not - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 334
34 FCOE-1048 248 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 335
that a Fibre Channel Protocol (FCP) switch probed devices on device vendor for a firmware upgrade containing a defect fix supported in this port type Probable Cause Indicates that private devices will not respond to the switch port login (PLOGI) during probing. Recommended Action The Brocade - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 336
35 FCPD-1003 250 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 337
out of memory condition Probable Cause Indicates that the switch is low on memory and failed to allocate new memory for a Fibre Channel driver instance. The function can only be " fc_create". This function creates a Fibre Channel driver instance. The failed function call kmalloc_wrapper has failed - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 338
number>,, WARNING, , FDISC exch=0x sid=0x did=0x on port rejected; temporary mem alloc error. Reset the port of the affected device. Probable Cause In busy login conditions, the buffer used for quick memory allocations (known as atomic malloc - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 339
at the specified port. Recommended No action is required. Action Severity INFO FCR-1002 Message , [FCR-1002], ,, INFO, , FC router proxy device in edge deleted at port . Probable Cause Indicates that a proxy device at the port in the edge - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 340
dirty connections. Replace the cables and SFPs if necessary. Severity INFO FCR-1005 Message , [FCR-1005], ,, INFO, , FC router LSAN zone device removed at port . Probable Cause Indicates that a device is removed from the logical storage area - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 341
edge fabric attached to the specified port. The enabled LSAN zone configuration is listed. Recommended No action is required. Action Severity INFO FCR , [FCR-1010], ,, INFO, , FC router LSAN zone disabled at port . Probable Cause Indicates - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 342
Severity INFO FCR-1012 Message , [FCR-1012], ,, INFO, , FC Router fabric build completed on port . Probable Cause Indicates that the fibre channel router has completed a fabric build at the specified port. Recommended No action is required - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 343
fabric. This may be caused by a link or switch failure. Recommended No action is required. Action Severity ,, ERROR, , FC router proxy device entries exhausted on port created in the fabric with the port resource problem. LSAN zones are removed using standard zoning - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 344
37 FCR-1020 FCR-1020 Message , [FCR-1020], ,, WARNING, , Local LSAN zone entries for FC router exhausted; max limit: . Probable Cause Indicates that the number of logical storage area network (LSAN) zones created within a MetaSAN exceeds - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 345
FCR-1023 37 FCR-1023 Message , [FCR-1023], ,, WARNING, , Local phantom port WWN entries exhausted. Probable Cause Indicates that the number of port world wide names (WWNs) in use exceeds the local port WWN resources. Recommended Action Limit the number - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 346
in use will be reused as needed. Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics, or there are highly dynamic - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 347
not in use are reused as needed. Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics, or there are highly dynamic - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 348
> enabled in the backbone fabric. Indicates that the specified logical storage area network (LSAN) zone was enabled in the backbone fabric. The enabled LSAN zone configuration is listed. 262 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 349
: . Probable Cause Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the local switch&apos zone database limitations. Recommended Remove excess cfg/zone/alias entries so that the number of logical storage area network (LSAN) Action zones - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 350
37 FCR-1040 FCR-1040 Message , [FCR-1040], ,, INFO, , Proxy device deleted in the backbone fabric. Probable Cause Indicates that a proxy device created in the backbone fabric was deleted. Recommended No action is required. Action Severity INFO FCR-1041 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 351
link protocol (ELP) command was issued and it is not supported. Recommended Action Run the portEnable and portDisable commands to enable and disable the port. If the problem persists contact your switch service provider. Severity ERROR FCR-1053 Message , [FCR-1053], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 352
switch service provider. Severity WARNING FCR-1055 Message , [FCR-1055], ,, INFO, , Switch with domain ID does not support configured in long distance mode, has incompatible long distance parameters. Recommended Check the port configuration - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 353
. Recommended Action Check the switches on both ends of the link for a possible mismatch in switch or port configuration parameters such as Operating Mode configuration setting. Probable Cause Indicates that virtual channel (VC) Link Init is enabled on the local switch and the remote switch is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 354
This is the Fibre Channel standard protocol, that supports EX/VEX_ports. Probable Cause Indicates that the maximum number of supported switch does not match the local switch. Recommended Run the switchShow command to display the fabric ID. Change the fabric ID to match on both ends - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 355
>, Fabric ID of backbone FC-Routers mismatch or overlap. Probable Indicates that another port on the switch is connected to the same , then merge the fabrics and manually re-enable the port. If configurations created in the connected fabric exceeds the maximum number supported by the Fibre Channel - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 356
the fcrState set to 2 (disabled). Note that the FC Routing service is disabled by the factory. Recommended No action is FC Routing configuration is set to default. Probable Cause Indicates that the FC Routing configuration is set to default by user. This removes all prior FC Routing configurations - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 357
that an earlier version of the switch in the backbone or edge that supports a different limit of logical storage area network (LSAN) zones was detected. Recommended Action Use the fcrResourceShow command on all Fibre Channel Routers in the Meta-SAN to find the lowest supported LSAN zone limits - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 358
Cause Indicates that the zone name configuration size created in the connected fabric exceeds the maximum supported by the FC Router. This size is equal to caused when the binding list details configured on the M-Model switch does not match with the currently configured front port domain ID and WWN - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 359
-1078 37 Recommended Ensure that the M-Model switch has the same currently configured details such as front port Action domain switch in the fabric has not responded to the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 360
for the domain . Indicates that during the Coordinated HotCode protocol, a switch in the fabric did not accept the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. 274 Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 361
as remote CP does not support FCR based matrix. Probable Cause Indicates that the remote control processor (CP) has earlier firmware, which does not support the FCR- based matrix while domain by using the configure command. Action Severity ERROR Fabric OS Message Reference 275 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 362
-name>, LSAN tag added. Probable Cause Indicates that the user has added a LSAN tag. Recommended No action is required. Action Severity INFO FCR-1089 supportsave data and send it to support. Action Severity ERROR 276 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 363
mode fabric(s). Probable Cause Indicates that an EX-port has been configured in Brocade Native mode. Device sharing will not happen with other Brocade Native mode fabrics because Integrated Routing license is not installed. Recommended No action is required. Action Severity WARNING Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 364
37 FCR-1094 278 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 365
byte hexidecimal value that represents the switch port of the switch that the FICON Control Unit is directly Channel. FICN-1003 Message , [FICN-1003], ,, WARNING, , FICON Tape Emulation License Key is not installed. Probable Cause Indicates that the fibre - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 366
FICON XRC Emulation License Key is not installed. Probable Cause Indicates FICON eXtended Remote Copy Cause Indicates that the FICON configuration was changed manually. Recommended No action is Disabled>. Probable Cause Indicates that the Fibre Channel over IP (FCIP) Tunnel ID associated with the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 367
device>. Probable Cause Indicates that a Selective Reset from the channel was received as normal part of path recovery or starting sequence in an error case. Recommended If there was a job failure associated with this event, contact your switch service provider. Action Severity ERROR FICN-1008 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 368
>. Probable Cause Indicates that a Device Level Exception frame was received from the FICON channel. Recommended If there was a job or IO failure associated with this event, contact your switch service provider. Action Severity INFO FICN-1011 Message , [FICN-1011], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 369
rejected the status with an LBY frame. Recommended If there was a job or IO failure associated with this event, contact your switch service provider. Action Severity INFO FICN-1014 Message , [FICN-1014], ,, INFO, , DevEgr:Device level exception flag - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 370
with a FICON Control Unit CUADDR. Recommended Contact your switch service provider. Action Severity ERROR FICN-1019 Message Probable Cause 0x. Indicates the FICON channel indicated in the path issued an Link Level Reject (LRJ) frame for - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 371
the device>. Probable Cause Indicates that the FICON channel issued a Selective Reset for a device that was active in emulation. Recommended If there was an unexpected job failure associated with this event, contact your switch service Action provider. Severity ERROR Fabric OS Message Reference - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 372
the device> seconds. Probable Cause Indicates that the FICON channel issued a Selective Reset sequence for a device. Recommended If there was an unexpected job failure associated with this event, contact your switch service Action provider. Severity ERROR FICN-1024 Message , [FICN - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 373
Indicates that an active disk emulation device received a Selective Reset from the FICON channel. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your switch Action service provider. Severity ERROR Fabric OS Message Reference 287 53-1002448 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 374
the channel. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your switch Action service provider. channel sent a System Reset to the disk control unit. Recommended No action is required. The MVS system was set to IPL or performing error recovery - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 375
This indicates that the channel side noted corruption from the device or CU processing. Recommended Contact your switch service provider. Action Severity Probable Cause Indicates that a locally connected FICON channel issued a System Reset to the specified FICON Control Unit. Recommended No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 376
HostPort DeviceDomain> . Probable Cause Indicates that a locally connected FICON channel sent a frame that could not be associated with a FICON Control Unit. Recommended Contact your switch service provider. Action Severity ERROR 290 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 377
from the channel. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your switch Action service provider. Severity operator event), contact your vendor's Action customer support for assistance. Severity WARNING Fabric OS Message Reference 291 53-1002448- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 378
sequence-number>,, ERROR, , HostTapeIng::FICON Selective Reset:Path= - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 379
> treating as system reset event. Probable Cause Indicates an LRJ from a FICON channel indicates that the channel believes that it no longer has a path established to the CU. Recommended This is normally an unexpected event, contact your vendor's customer support for assistance. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 380
data from the locally connected channel or control unit>. Probable Cause Indicates a TIR received from a FICON end point indicates that it no longer has an established path to its peer. Recommended This is an unexpected event; contact your vendor's customer support - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 381
to break an XRC session with the extended DASD device. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity INFO FICN-1053 Message , [FICN-1053], ,, INFO, , XRC Withdraw From Session: SessID - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 382
that an emulation frame could not be created and sent to a device. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1058 Message , [FICN-1058], ,, ERROR, , Error return from frame - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 383
frame could not be created and sent to an LPAR. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1060 Message , [FICN-1060], ,, ERROR, , Error return from fcFwdPrcEgressFrame - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 384
Probable Cause Indicates an abort operation has been received from the local FC interface for an active emulation exchange. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1063 Message , [FICN-1063], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 385
Cause Indicates an abort operation has been received from a peer FC interface for an exchange. Recommended If there were associated IO errors or there is an internal memory leak, contact your vendor's customer support for assistance. Severity WARNING FICN-1067 Message , [FICN-1067], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 386
configuration. Refer to the string for the nature of the configuration issue. Recommended If resolution of the configuration issue cannot be completed, contact your vendor's customer Action support from an active emulation device. Recommended The end of tape is a normal event during pipelining - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 387
:states=0x:cmds=0x:status=0x:flags=0x - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 388
while this tape was loaded>. Probable Cause Indicates a Rewind and Unload IO has been processed from a locally connected LPAR and Read Channel Program pipelining was performed on the currently loaded tape. Recommended No action is required. Action Severity INFO FICN-1077 Message Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 389
FICN-1078 38 Recommended No action is required. Action Severity INFO FICN-1078 Message , [FICN-1078], ,, INFO, , DevTapeEgr:ReadBlkReport:Path= :Emuls=0x - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 390
this device> treating as system reset event. Probable Cause Indicates an LRJ from a FICON channel indicates that the channel does not have a path established to the CU. Recommended This is normally an unexpected event, contact your vendor's customer support for assistance. Action Severity WARNING - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 391
Down on GE,tunnel Id=. Probable Cause Indicates a FICON FCIP tunnel to the peer switch has been terminated. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 392
Last 4 status values received from the device>. Probable Cause Indicates the FICON channel indicated in the path issued an LRJ frame for a sequence from the associated with this event, contact your vendor's customer Action support for assistance. Severity WARNING FICN-1089 Message , - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 393
flags for the device>. Probable Cause Indicates the FICON channel issued a Selective Reset for a device that was active in emulation. support for assistance. Severity ERROR FICN-1091 Message , [FICN-1091], ,, ERROR, , DevTeraEgr:FICON Selective Reset - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 394
DevTeraIng:UnusualStatus:WriteCancelSelr:Generating Final Ending Status Path=0x - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 395
Last 4 status values sent to the channel from this device>. Probable Cause Indicates an LRJ received from a device indicates that the CU has lost the logical path to the LPAR. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 396
-number>,, ERROR, , HostTeraIng::FICON Selective Reset:Path=0x - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 397
> treating as system reset event. Probable Cause Indicates an LRJ from a FICON channel indicates that the channel believes that it no longer has a path established to the CU. Recommended This is normally an unexpected event; contact your vendor's customer support for assistance. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 398
this device> treating as system reset event. Probable Cause Indicates an LRJ from a FICON channel indicates that the channel does not have a path established to the CU. Recommended This is normally an unexpected event; contact your vendor's customer support for assistance. Action Severity WARNING - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 399
associated with this event, contact your vendor's customer Action support for assistance. Severity WARNING FICN-1109 Message , [FICN flags for the device>. Probable Cause Indicates the FICON channel issued a Selective Reset for a device that was active in emulation. Recommended - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 400
Cause Indicates the FICON Printer write pipelining processed sense reset event. Probable Cause Indicates an LRJ from a FICON channel indicates that the channel does not have a path established to the CU. Recommended This is normally an unexpected event, contact your vendor's customer support - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 401
4 status values sent to the channel from this device>. Probable Cause Indicates that an LRJ was received from a device indicatng that the CU has lost the logical path to the LPAR. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 402
started for this device> seconds. Probable Cause Indicates that the channel recognized a timeout condition and issued a Selective Reset. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR 316 Fabric OS Message Reference 53 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 403
channel. This is performed during FICON path recovery. Recommended If this was an unexpected event, contact your vendor's customer support the channel for this device> treating as system reset event. Probable Cause Indicates than an LRJ was received from a FICON channel indicates that the channel - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 404
Emulation Enabled or Disabled>. Probable Cause Indicates the configuration was changed manually. Recommended No action is required. Action Severity INFO Cause Indicates an abort operation has been received from a local FC interface for an exchange. Recommended If there were associated IO errors - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 405
Probable Cause Indicates an abort operation has been received from a peer FC interface for an exchange. Recommended If there were associated IO errors at logged out from the switch. Recommended This may be an unexpected event, contact your vendor's customer support for assistance. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 406
to the peer switch has been terminated. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-2087 Message , [FICN-2087], ,, ERROR, , FICON connected 3900 printer discovered Path=0x - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 407
. If the problem persists, or for a nonbladed Action switch, download a new firmware using the firmwareDownload command. Severity ERROR FICU-1003 Message , [FICU-1003], ,, WARNING, , : FICON-CUP License Not Installed: ( - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 408
to core PID using the configure command and then re-enable Download a new firmware using the firmwareDownload command. Action Severity ERROR FICU-1006 Message , [FICU-1006], ,, WARNING, , Control Device Allegiance Reset: (Logical Path: 0x:0x - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 409
Action Check the memory usage in the switch using the memShow command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Severity WARNING FICU-1008 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 410
,, WARNING, , Host data file cannot be resetted to proper size. Probable Cause Indicates that the file system is full Create additional room in the file system and initiate a warm recovery. Action Severity WARNING FICU-1017 Message Probable Cause , [ - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 411
timestamp>, [FICU-1019], ,, INFO, , Switch has been set offline by LP(). Probable Cause Indicates that FMS has disabled the switch. Recommended No action is required. Action Severity INFO FICU-1020 Message < - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 412
ERROR, , Detected 48 port blade when FMS mode is enabled. Probable Cause Indicates presence of a 48-port blade in the switch. Recommended No action is required. Action Severity ERROR FICU-1024 Message , [FICU-1024], ,, ERROR, , Detected 64 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 413
WARNING, , exchange overlapped, pid= Probable Cause Indicates that the FC kernel driver has timed out the exchange while the application is still active. When the FC kernel driver reuses the exchange, the application will overlap. This happens on a timed-out exchange; it - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 414
40 FKLB-1001 328 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 415
>, [FLOD-1004], , FFDC, ERROR, , Excessive LSU length = Probable Cause Indicates that the LSU size exceeds what the system can support. Recommended Reduce the number of switches in the fabric or reduce the number of redundant ISLs between two Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 416
41 FLOD-1005 FLOD-1005 Message , [FLOD-1005], ,, WARNING, , Invalid received domain ID: . Probable Cause Indicates that the received LSR contained an invalid domain number. Recommended No action is required because the LSR is discarded. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 417
number> out of range Probable Cause Indicates that the specified input port number is out of range as it does not exist on the switch. Recommended No action is required. Action Severity ERROR FSPF-1002 Message , [FSPF-1002], ,, INFO, , Wrong neighbor ID - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 418
port. The section ID is used to identify a set of switches that share an identical topology database. The section ID is implemented inside version by running the firmwareDownload command to update the firmware to the Action latest version. All current versions of the Fabric OS support FSPF version - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 419
. Probable Cause Indicates that there is a problem with the current ICL configuration. The ICL connectivity of one or more neighbor domains violates topology is valid for routing from the local switch. Recommended No action is required. Action Severity INFO Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 420
42 FSPF-1010 334 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 421
using the reBoot command. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. Severity WARNING FSS-1002 Message , [FSS-1002], ,, WARNING - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 422
not available on the FSS device. Recommended If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP Action transfers; then execute the supportSave command and contact your switch service provider. Severity WARNING 336 Fabric OS Message Reference 53-1002448 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 423
Execute the supportShow or supportSave commands to validate the network configuration and then execute the haSyncStart command to restore the HA synchronization. If the problem persists, contact your switch service provider. Severity CRITICAL FSS-1008 Message , [FSS-1008], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 424
43 FSS-1011 Recommended Execute the supportSave command and contact your switch service provider. Action Severity WARNING FSS-1011 Message , [FSS-1011], ,, INFO, , FSS Info: . Probable Cause Indicates an FSS-related - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 425
, execute the haDump command to diagnose the problem. If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service provider. WARNING FSSM-1004 Message Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 426
44 FSSM-1004 In a switch system, this message is logged when a firmware upgrade or downgrade was invoked. The new firmware version is not compatiable with the current running version. This causes a disruptive firmware upgrade or downgrade. Recommended For a dual CP system, execute the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 427
No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Typically, low temperatures means that the fans and airflow of a switch are functioning normally. Verify that the location temperature is within the operational range of the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 428
Indicates that the internal temperature of the switch has changed from a value outside the particular policy of the end-user installation. If you receive a temperature power supply is faulty. The power supply is not producing enough power. Recommended Verify that you have installed the power supply - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 429
Cause Indicates that the power supply counter changed from a value outside of the acceptable range to a value within the acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 430
message as is appropriate to the particular policy of the Action end-user installation. Severity WARNING FW-1035 Message , [FW-1035], Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 431
Low value>). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has fallen below the low boundary. the particular policy of the Action end-user installation. Severity INFO Fabric OS Message Reference 345 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 432
Label>, is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has fallen below the low boundary. The transmit performance area measures the amount of outgoing laser - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 433
> . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP the particular policy of the Action end-user installation. Severity INFO FW-1045 Message < pluggable (SFP) voltage has changed. If the supplied voltage of the SFP transceiver is outside of - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 434
(SFP) voltage has risen above the high boundary. Recommended The supplied current of the SFP transceiver is outside of the normal range, this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1049 Message , [FW-1049], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 435
message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1053 Message , [FW-1053], < of the small form-factor pluggable (SFP) Power on Hours has fallen below the low boundary. Recommended Configure the low threshold to 1 so that the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 436
that the value of the small form-factor pluggable (SFP) Power on Hours has risen above the high boundary. High value indicate switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 437
the end-user installation. Check both ends of a fabric reconfiguration: • Two switches with the same domain ID ends. Verify that the small form-factor pluggables (SFPs) have not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 438
fabric reconfiguration: • Two switches with the same domain ID of the Action end-user installation. Severity INFO FW ends. Verify that the small form-factor pluggable (SFP) has not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 439
of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1122 Message , [FW-1122 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 440
of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1125 Message , [FW-1125 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 441
this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1128 Message Probable Cause , [FW- conflicts. • Segmentation of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 442
high boundary. Zone changes occur when there is a change to the effective zone configuration. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 356 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 443
range. Zone changes occur when there is a change to the effective zone configuration. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1133 Message , [FW-1133], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 444
or FLOGI. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1137 Message , [FW-1137], ,, INFO, , , value has changed(High=, Low - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 445
or removed. A low number of SFP state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1139 Message , [FW-1139], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 446
errors and, if applicable, troubleshoot them. A low number of link loss errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1162 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 447
Recommended Action Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. If you continue to experience synchronization loss errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity INFO FW - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 448
of the Action end-user installation. Severity INFO FW ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. If you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 449
Loss of signal generally indicates a physical problem. A low number of signal loss errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1170 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 450
protocol errors occur due to hardware problems. A low number of protocol errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1174 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 451
a hardware problem with an small form-factor pluggable (SFP) or cable. A low number of invalid words means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 452
value within the acceptable range. Invalid words usually indicate a hardware problem with an small form-factor pluggable (SFP) or cable. Recommended message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1180 Message , [FW-1180], < - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 453
low boundary. A low number of invalid CRCs means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1182 Message , [FW-1182], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 454
has changed. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1185 Message , [FW-1185], ,, INFO, , , , is below low boundary(High - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 455
FW-1188 45 Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1188 Message , [FW-1188], ,, INFO, , , , value has changed(High= - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 456
a trunk port. A low number of port state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 370 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 457
message as is appropriate to the particular policy of the Action end-user installation. Severity WARNING FW-1195 Message , [FW-1195], resets that the port experiences has changed. Link resets occur due to link timeout errors that indicate no frame activity. Recommended Check both ends - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 458
errors that indicate no frame activity at all. Both physical and hardware problems can cause link resets to increase. Recommended Respond to this message as is appropriate to the particular policy of the end-user installation. Action Severity INFO 372 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 459
below low threshold. A low number of C3 transmit time out means that the switch is functioning normally. Recommended Respond to this message as it is appropriate to the particular policy of the end-user installation. Action Severity INFO FW-1202 Message , [FW-1202], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 460
45 FW-1204 Recommended Check the target device; it could be slow. Action Severity INFO FW-1204 Message , [FW-1204], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 461
that the switch receives has changed. Receive performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 462
the switch transmits has changed. Transmit performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 463
to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1250 Message , [FW-1250], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 464
SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1273 Message , [FW-1273], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 465
to establish Telnet connections to switches in the fabric. Recommended Action Execute the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 466
authorized to establish Telnet connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 467
to establish browser connections to the switches in the fabric. Recommended Action Execute the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 468
the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator boundary. SCC violations indicate that an unauthorized switch tried to join the fabric. The SCC_POLICY contains a list of switches by World Wide Names (WWNs) that - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 469
server. Recommended Action Execute the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity INFO Fabric OS Message Reference 383 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 470
. Recommended Action Execute the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity WARNING 384 Fabric OS Message Reference - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 471
for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI IP location of the login attempt. Responses to security-class messages depend on user policies. Consult your security administrator - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 472
primary fabric configuration server (FCS). When the FCS downloads a new configuration to the other switches in the fabric, the packet is signed using the private key of the primary FCS. The receiving switch has to verify this signature with the public key of the primary FCS switch. If verification - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 473
FCS switch and its certificate is signed by the Root CA recognized by the receiving switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 474
FCS switch and its certificate is signed by the Root CA recognized by the receiving switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 475
Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies. Severity Authentication failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 476
failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not service (TS) out-of-sync violations has changed. Recommended Responses to security-class messages depend on user policies. Consult your security administrator - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 477
still has the WWN of the last primary FCS switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies. Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 478
it still has the WWN of the last primary FCS switch, it increments this counter and resets the WWN of the primary FCS to all zeroes. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies. Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 479
database. A compatible security database means that the version stamp and fabric configuration server (FCS) policy matches exactly. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies. Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 480
can be executed only on a backup FCS switch. The counter increments every time someone issues one of these commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 481
can be executed only on a backup FCS switch. The counter increments every time someone issues one of these commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 482
decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1401 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 483
limits. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1404 Message , [FW-1404], ,, WARNING, , ,is above high boundaries(High= - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 484
Severity INFO FW-1424 Message , [FW-1424], ,, WARNING, , Switch status changed from to . Probable Cause Indicates that the switch status is not in a healthy state. This occurred because of a policy violation. Recommended - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 485
as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1426 Message , [FW-1426], ,, WARNING, , Switch status change contributing factor Power supply: bad, absent. Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 486
>, [FW-1429], ,, WARNING, , Switch status change contributing factor: Power supplies are not redundant. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the power supplies are not in the correct slots for redundancy - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 487
to install the same level of firmware to both CPs. Replace any faulty CPs. If you reset the micro-switch (the latch on the CP blade) on the active CP before the heartbeat was up on a power cycle, and the CPs came up non-redundant, then you should reboot the CPs again to clear the problem - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 488
Faulty ports: faulty out of ports:config( percent,). (Port(s) ). Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of faulty ports is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 489
SFPs:config( percent,). (Port(s) ). Probable Cause Indicates that the switch status is not in a healthy state. This means that an FRU is inserted but not powered on. Fabric OS Message Reference 403 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 490
45 FW-1442 Recommended Verify that the event was planned. Action Severity INFO FW-1442 Message , [FW-1442], ,, INFO, , state has changed to . Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 491
for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to number of power supplies. So those values will not be automatically changed. With no AP blades, the default values are 3 (out of service) indicating switch status is DOWN or 0 indicating no - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 492
ports: Error out of ports:config( percent,). (Port(s) ). Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of faulty ports are greater than - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 493
exceed Fabric Watch threshold on the port. Both physical and hardware problems can cause link failures. Link failures frequently occur due to a troubleshoot them. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 494
. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1513 Message , [FW-1513], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 495
No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Frequent loss of signal generally indicates a physical problem. Check both ends of your cable connection. Verify that the cable and small form-factor pluggable (SFP) are not faulty - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 496
due to software glitches. Persistent protocol errors occur due to hardware problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1519 Message , [FW-1519], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 497
range. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your small form-factor pluggables (SFP), cables, and connections - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 498
range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1525 Message , [FW-1525], ,, INFO, , , , has crossed lower threshold - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 499
errors that indicate no frame activity at all. Both physical and hardware problems can cause link resets to increase. Recommended Respond to this message as is appropriate to the particular policy of the end-user installation. Action Severity INFO Fabric OS Message Reference 413 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 500
that indicate no frame activity at all. Both physical and hardware problems can cause link resets to increase. Recommended Respond to this message as is appropriate to the particular policy of the end-user installation. Action Severity INFO FW-1531 Message , [FW-1531], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 501
FOS6.3. Disabling port fencing feature for this. Probable Cause Indicates that in previous versions portfencing is configured for Link/Sync loss, but after upgrading to new version, in which portfencing is not suppoted, resets the above bit. Recommended No action is required. You are informed that - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 502
45 FW-3011 Recommended Respond to this message as it is appropriate to the particular policy of the end-user installation. Action Severity INFO FW-3011 Message , [FW-3011], ,, INFO, , , is below low boundary(High=, Low=< - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 503
loss that the circuit experiences has changed. Recommended Respond to this message as is appropriate to the particular policy of the end-user installation. Action Severity INFO FW-3015 Message , [FW-3015], ,, INFO, , , is below low - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 504
has gone offline or it has come online. Recommended Respond to this message as is appropriate to the particular policy of the end-user installation. Action Severity INFO FW-3019 Message , [FW-3019], ,, INFO, , , is below low boundary - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 505
. Action Severity WARNING FW-3022 Message , [FW-3022], ,, INFO, , Timebase for is changed to Minute as Seconds is not supported. Probable Cause Indicates that the timebase for the class is changed to minute implcitly as seconds timebase is not - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 506
45 FW-3022 420 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 507
by ejecting the card and reseating it. If the problem persists, replace Action the standby CP. Severity CRITICAL Indicates that the switch has been restarted because of a user action or an error. The switch restart can be initiated Reset • Fastboot Fabric OS Message Reference 421 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 508
error log for additional messages that Action may indicate reason for the switch restart. Severity INFO HAM-1005 Message , [HAM-1005], a diagnostic test on the EMAC and will wait for the standby CP to reset if it is down. Recommended No action is required. Action Severity INFO HAM- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 509
number | FFDC | CHASSIS, FFDC, CRITICAL, , Need to MANUALLY REBOOT the system for recovery auto-reboot is disabled. Indicates that the recovery by auto-restart is disabled, therefore the switch needs to be manually restarted for recovery. This message is displayed if the event logged in - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 510
switch was not ready for warm recovery. Recommended Manually trigger the switch restart for cold recovery, if needed; or wait until switch is ready for warm Action recovery , Password database conversion failed. Probable Cause Indicates that the password database conversion has failed - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 511
. Probable Cause Indicates that the software watchdog detected termination of a restartable daemon and need to restart or failover the switch. Recommended Manually initiate a restart or failover the system. Action Severity CRITICAL Fabric OS Message Reference 425 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 512
46 HAM-1014 426 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 513
switch restart automatically and attempts a cold recovery. Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service a user-initiated action such as firmware download, the standby CP blade being reset or removed - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 514
. Typically, this message is displayed when the standby CP has been restarted. Note that in certain circumstances a CP may experience a double reset and restart twice in a row. A CP can recover automatically even if it has restarted twice. Recommended No action is required. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 515
Replace the faulty blade or switch (for nonbladed switches). Action Severity ERROR HIL-1102 power supply status. Try to reseat the faulty fan field-replaceable units (FRUs) and power supply FRU to verify that they are seated properly. If the problem persists, replace the fan FRU or the power supply - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 516
, and 4024, the entire switch must be replaced because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100 , 4900, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other voltage - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 517
, and 4024, the entire switch must be replaced because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100, 4900, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other voltage - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 518
of your switch. Refer to the hardware reference manual for your switch for the switches and is not applicable to the Brocade 24000 or 48000. Recommended Action For the Brocade 3900 replace the fan FRU. For the Brocade 3016, 3250 and 3850, the entire switch must be replaced because these switches - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 519
problem can quickly cause the switch to overheat. This message is specific to nonbladed switches and is not applicable to the Brocade 24000 or 48000. Recommended For the Brocade operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 520
-replaceable unit (FRU) has failed or has been removed. This message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Replace the affected fan FRU immediately. Action Severity WARNING HIL-1302 Message , [HIL-1302], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 521
HIL-1305 48 Recommended Replace the faulty fan FRUs immediately. Action Severity ERROR HIL-1305 Message , [HIL-1305], ,, ERROR, , One or two fans failed. Replace failed fan FRUs immediately. Probable Cause Indicates that multiple fan field-replaceable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 522
-1311], ,, INFO, , No fans are faulty. Probable Cause Indicates recovery from earlier condition of one or more fans having failed. Recommended This can only occur on switches with non-removable fans. It follows a previous indication of Action faultiness. 436 Fabric - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 523
, it indicates oscillation between faulty and non-faulty behavior. Replace the switch because the fan is not field-replaceable. Severity INFO HIL-1401 Message -number>,, WARNING, , fan FRUs missing. Install fan FRUs immediately. Indicates that one or more fan field-replaceable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 524
48 HIL-1501 Recommended Install the missing fan FRUs immediately. Action Severity WARNING HIL-1501 Message < that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 525
Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the faulty blade. Severity CRITICAL HIL-1504 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 526
. To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 527
switch. Refer to the hardware reference manual for your switch To help prevent future problems, make sure that all power cycling the switch. Severity ERROR HIL-1602 Message , [HIL-1602], , FFDC, CRITICAL, , Multiple temperature sensors failed. Service - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 528
count> fans out of service. System is shutting down power and the switch is on. Probable Cause Indicates that the power supply is not connected to a power source or it is not switched on or the unit is faulty. Applicable only to Brocade 5100 and Brocade 6510. Recommended Ensure that the power - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 529
shut down. Probable Cause Indicates that PSU FAN Air Flows are in reverse direction. System will be shut down. Applicable only to Brocade 6510. Recommended Ensure fan units have same direction. Action Severity CRITICAL HIL-1613 Message , [HIL-1613], ,, INFO, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 530
48 HIL-1650 444 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 531
In the Fabric OS, the HLO dead timeout value is not configurable, so this error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended Action The dead timeout value of the remote switch must be compatible with the value specified in the FSPF protocol - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 532
number in the HLO message has an invalid value. This error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The HLO message of the remote switch must be compatible with the value specified in the FSPF Action protocol. Refer to the documentation - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 533
a problem reading an essential file containing configuration information from the nonvolatile storage device. This could be the result of a missing file or a corrupt file system. Recommended Action Run the firmwareDownload command to reinstall the firmware to your switch - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 534
50 HMON-1001 448 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 535
Chapter HSL System Messages 51 HSL-1000 Message , [HSL-1000], ,, CRITICAL, , HSL initialization failed. Probable Cause Indicates an HSL initialization failure. Recommended No action is required. Action Severity CRITICAL HSL-1001 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 536
to get kernel page size bytes for mmap. Probable Cause Indicates that there is not enough contiguous kernel memory. Recommended Install more memory on board. Action Severity CRITICAL HSL-1007 Message Probable Cause , [HSL-1007], ,, ERROR, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 537
Recommended No action is required. Action Severity ERROR HSL-1007 51 Fabric OS Message Reference 451 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 538
51 HSL-1007 452 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 539
on PID format, refer to the Fabric OS Administrator's Guide. Severity INFO HTTP-1002 Message , [HTTP-1002], , AUDIT, INFO, , Zoning transaction initiated by User: , Role: completed successfully. Probable Cause Indicates that the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 540
52 HTTP-1003 454 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 541
failed. Disabling port. Probable Cause Indicates that the specified port has crashed unexpectedly and restarting attempts have failed. Recommended Power off and power on the blade using the slotPowerOff and slotPowerOn commands. Action Severity ERROR Fabric OS Message Reference 455 53-1002448 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 542
53 IBD-1000 456 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 543
target name length exceeds the character limit [] Probable Cause Indicates that the target name length exceeds the supported limit. Recommended Redo the discovery to get the latest target list, and try again. Action Severity WARNING IBPD-1003 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 544
54 IBPD-1003 458 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 545
Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference for more information on this command. Severity ERROR ICPD-1003 Message , [ICPD-1003], ,, INFO, , iSCSI configuration has been committed by switch - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 546
Client service on a single switch in the fabric using the fosConfig command. Refer Action to the Fabric OS Command Reference for more information on this command. Severity WARNING ICPD-1005 Message , [ICPD-1005], ,, WARNING, , iSCSI configuration between - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 547
Recommended No action is required. Action Severity INFO ICPD-1008 55 Fabric OS Message Reference 461 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 548
55 ICPD-1008 462 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 549
IP address has been changed. If the source of the address change is manual, this means that the address change was initiated by a user. If the source of the address change is the Dynamic Host Configuration >, Switch name has been successfully changed to . Indicates that the switch name - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 550
56 IPAD-1003 Recommended No action is required. Action Severity INFO IPAD-1003 Message , [IPAD-1003], ,, INFO, , DNS parameters saved successfully. Probable Cause Indicates that the Domain Name System (DNS) parameters are saved successfully. Recommended - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 551
initialization of a module within the IPS daemon failed. Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference Manual for more information on this command. Severity ERROR IPS-1003 Message , [IPS-1003], ,, WARNING - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 552
enforcement. Recommended Change the tunnel configuration on one side of the tunnel to match that of the other side to set up Action the tunnel. Severity WARNING IPS-1007 Message Probable Cause , [IPS-1007], ,, WARNING, , FX8-24 blade () is not GA2 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 553
IPS-1007 57 Recommended Change the tunnel configuration to remove IPSec configurations or insert a GA2 revised FX8-24 Action blade. Severity WARNING Fabric OS Message Reference 467 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 554
57 IPS-1007 468 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 555
system-name>, Configuration peering with external iSNS server slot/port /ge (current /ge). Probable Cause Indicates that the user has issued - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 556
system-name>, Peering with external iSNS server not started because configuration unchanged. Indicates that peering with the external internet storage name service (iSNS) server was already started with the same configuration. 470 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 557
configuration and retry the peering with the external Action iSNS server. Severity INFO ISNS-1009 Message , [ISNS-1009], ,, INFO, , Peering with external iSNS server - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 558
INFO, , Start peering with external iSNS server on management port. Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS) on the management port. Recommended No action is required. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 559
operation to the primary or backup key vault. Recommended Determine whether the configured key value is operational, and if it is not, change the switch key Action vault settings or resolve the operational problem at the vault. Severity ERROR KAC-1006 Message , [KAC-1006], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 560
to put to the primary or backup key vault. Recommended Determine whether the configured key value is operational, and if it is not, change the switch key Action vault settings or resolve the operational problem at the vault. Severity WARNING KAC-1008 Message , [KAC-1008], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 561
KAC-1011 59 KAC-1011 Message , [KAC-1011], ,, WARNING, , Putting the dummy DEK to the KV failed. Dummy DEK: , KeyCount: . Error code=, string=. Probable Cause Indicates that putting - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 562
: Error connecting to . Error code=, string=. Indicates that key archival client is unable to communicate with the primary or backup key vault. Recommended Change the switch key vault settings and/or ensure that the configured key vault is operational. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 563
>:. Probable Cause Indicates a process on the switch has ended unexpectedly. Recommended Copy the warning message along with any core file information, and contact your switch service Action provider. Severity WARNING Fabric OS Message Reference 477 53-1002448 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 564
60 KSWD-1002 478 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 565
Message , [KTRC-1003], ,, ERROR, , Cannot open ATA dump device Probable Cause Indicates the ATA dump driver is not initialized properly. Recommended No action is required. Action Severity ERROR KTRC-1004 Message Probable Cause , [KTRC-1004 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 566
61 KTRC-1005 Recommended No action is required. Action Severity ERROR KTRC-1005 Message , [KTRC-1005], ,, ERROR, , Trace initialization failed. . . Probable Cause Indicates that a trace was unable to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 567
-number>,, ERROR, , Message Queue Error: Message queue create failed. Probable Cause Indicates that the l2sys encountered System Service Manager (SSM) message queue errors. Recommended Restart the l2sys daemon. Action Severity ERROR Fabric OS Message Reference 481 53-1002448 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 568
62 L2SS-1004 L2SS-1004 Message , [L2SS-1004], ,, ERROR, , FDB error: Error in creating AVL tree. Probable Cause Indicates that the l2sys has encountered an error while initializing the AVL tree. Recommended Restart the l2sys daemon. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 569
L2SS-1008 62 L2SS-1008 Message , [L2SS-1008], ,, INFO, , Hardware gid limit reached on chip , gid limit at . Probable Cause Indicates that all the dynamic Group IDs (GIDs) are allocated. Recommended Clear some of the ACL entries using - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 570
62 L2SS-1008 484 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 571
Error (possibly the CAM is full): , rc=. Probable Cause Indicates an error in the hardware or the driver of the Layer 3 subsystem (L3SS). The L3SS may have passed invalid parameters or the hardware content-addressable memory (CAM) may be full. Recommended Retry or - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 572
63 L3SS-1004 486 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 573
Indicates that initialization of the specified module within the Link Aggregation Control Protocol (LACP) daemon has failed. Recommended Download a new firmware using the firmwareDownload command. Action Severity ERROR LACP-1002 Message , [LACP-1002], ,, ERROR, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 574
64 LACP-1002 488 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 575
failed. Disabling port. Probable Cause Indicates that the specified port has crashed unexpectedly and restarting attempts have failed. Recommended Power off and power on the blade using the slotPowerOff and slotPowerOn commands. Action Severity ERROR Fabric OS Message Reference 489 53-1002448 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 576
65 LANCE-1000 490 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 577
Manager service is enabled by the factory setting and it is not user configurable. Recommended No action is required. Action Severity INFO LFM-1003 Message , [LFM-1003], ,, INFO, , The Logical Fabric Manager configuration is set to default. Probable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 578
some internal logging purpose. Recommended Send the ffdc log to the support. Action Severity CRITICAL LFM-1005 Message , [LFM-1005], ], ,, WARNING, , The switch with domain with firmware version has joined the FID fabric and may - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 579
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING LOG-1002 Message , [LOG-1002], , FFDC, WARNING, , A log message was dropped - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 580
the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO LOG-1005 Message , [LOG-1005], ,, INFO, , Log message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 581
ID, whose range is from 1 through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity ERROR LSDB number that identifies the most recent version of the LSR (link state record). The switch generates its local link state record - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 582
68 LSDB-1004 Recommended Run the switchDisable and switchEnable commands. A new local link state record is generated Action during the switch enable. Severity CRITICAL LSDB-1004 Message Probable Cause , [LSDB-1004], ,, WARNING, , No Link State Record for - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 583
Chapter MCAST_SS System Messages 69 MCAST_SS-1001 Message , [MCAST_SS-1001], ,, ERROR, , Socket Error: () for socket the error code. Probable Cause Indicates error encountered in Linux socket. Recommended Try - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 584
Invalid message type expecting or or . Probable Cause Indicates that type in the message recieved from driver is invalid. Recommended Try restarting the mcast_ssd daemon. Action Severity ERROR MCAST_SS-1006 Message , [MCAST_SS-1006], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 585
MCAST_SS-1009 69 Recommended Try restarting the mcast_ssd daemon. Action Severity ERROR MCAST_SS-1009 Message , [MCAST_SS-1009], ,, ERROR, , L2SS error : () vlan mac . Probable Cause Indicates that mcast_ss encountered L2SS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 586
Probable Cause , [MCAST_SS-1016], ,, ERROR, , Message error: () (). Indicates that length of the message recieved from the driver is invalid. 500 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 587
MCAST_SS-1017 69 Recommended Try restarting the mcast_ssd daemon. Action Severity ERROR MCAST_SS-1017 Message , [MCAST_SS-1017], ,, ERROR, , Learning error: () Invalid number for ifindex . Probable Cause Indicates that - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 588
69 MCAST_SS-1020 Recommended Try restarting the mcast_ssd daemon. Action Severity ERROR 502 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 589
problem persists, execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the supportSave command and contact your switch service storage. The default values are used. The switch NID is used only in the following Single Byte (SB) Extended Link Services (ELS) frames - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 590
possible values for the state variable are On and Off. Recommended Action IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is for information purposes only - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 591
number>. Probable Cause Indicates a null parent was reported. MPATH uses a tree structure in which the parent is used to connect to the root of the tree. Recommended No action is required. Action Severity ERROR MPTH-1002 Message , [MPTH-1002], , FFDC, ERROR, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 592
71 MPTH-1003 506 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 593
the following: • 2 - MSG_TX • 3 - MSG_INTR • 4 - MSG_STR • 6 - MSG_ASYNC_IU • 7 - MSG_LINIT_IU • 8 - MSG_RSCN • 9 - MSG_IOCTL • 10 - MSG_ACCEPT • 11 - MSG_IU_FREE • 12 - MSG_US • 13 - MSG_EXT_RSCN • 14 - MSG_RDTS_START • 15 - MSG_RDTS_SENDEFP • 16 - MSG_RDTS_RESET Recommended No action is required - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 594
72 MQ-1006 MQ-1006 Message , [MQ-1006], ,, WARNING, , queue : msg too long (:) Probable Cause Indicates the incoming message size is larger than the message queue size. Recommended No action is required. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 595
Cause Indicates the management server (MS) has segmented from another switch domain at the specified port number because of errors or inconsistencies defined in the MS platform service. Recommended Restart or power cycle the switch. Action Severity WARNING MS-1002 Message , [MS-1002 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 596
by> Run the firmwareDownload command to upgrade the firmware level on the switch to a level that supports RCS. RCS is supported in Fabric OS v2.6, v3.1 and greater transfers; then run the supportSave command and contact your switch service provider. Severity INFO MS-1004 Message , [MS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 597
. MS expects either a CT accept IU or a reject IU; the MS received neither response, which violates the Fibre Channel Generic Services (FS-GS) specification. Recommended Check the integrity of the FC switch at the specified domain. It is not sending correct MS Action information as defined by the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 598
are likely the result of SAN hardware problems such as bad cables or recovery failed during the WARM INIT phase of a reboot. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 599
[MS-1025], ,, WARNING, , Possible Failover could have occurred while enabling MS Platform Service. Probable Cause Indicates that while the MS Platform Service was being enabled, a failover has occurred. This can leave the fabric in an inconsistent state. Recommended - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 600
is blocked. Recommended Enable Platform service on the switch and renable the port to join the fabric. Action Severity WARNING MS-1027 Message , [MS-1027], ,, INFO, , Fabric Name configured. Probable Cause Indicates that the fabric name - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 601
initialize. Recommended Restart or power cycle the switch. Action Severity ERROR MSTP- switch, execute the haFailover command. If the problem persists or if this is a nonbladed switch, download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Command Reference Manual - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 602
-number>,, INFO, , . My Bridge ID: Old Root: New Root: Probable Cause Indicates that the MSTP bridge or bridge instance root has changed. Recommended No action is required. Action Severity INFO MSTP-2003 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 603
MSTP-2006 74 Recommended No action is required. Action Severity INFO MSTP-2006 Message , [MSTP-2006], ,, INFO, , MSTP instance brigde priority is changed from to . Probable Cause Indicates that the MSTP instance - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 604
74 MSTP-2006 518 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 605
). NBFSM states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full If this error occurs repeatedly, then there is a problem in the protocol implementation between two switches. Fabric OS Message Reference 519 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 606
are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full Recommended No action is required. The Fabric OS automatically recovers from this problem. Action Severity WARNING 520 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 607
the remote switch with firmware v4.3 or higher, or v3.2 or higher, as appropriate for the switch type, so that it can support GMI to name server on the standby CP has lower supported capability than the active CP because of different firmware versions running on the active and standby CPs. This - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 608
of the lowest version of firmware. Severity INFO NS-1005 Message , [NS-1005], ,, WARNING, , Zone size of has over the supporting limit of for the remote switch domain ID . Probable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 609
the required licensing. Recommended Either install the Open FR license or relocate Open FR devices to a licensed switch. Action Severity WARNING NS-1009 Message a QoS zone. Recommended Remove CSCTL configured devices from QoS zone. Action Severity WARNING Fabric OS Message Reference 523 53 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 610
Cause Indicates that a failover flag has disabled TI zone in a base switch fabric. Recommended Modify failover flag to enable or remove TI zone with WWPN) have been removed from the Name Server database. Recommended Administrators should verify the reported devices with a duplicated WWPN. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 611
possible reason codes: • Admin down • Link protocol down • DOT1x authenticating • Minumum member links not UP (applicable only for port-channel interfaces) • DOT1x authentication failed • BRCD remote link negotiation failed/LLDP disabled • LAG negotiating/failed • LAG admin state is down • UNKNOWN - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 612
INFO, ,The FCoE VLAN: is in use. Therefore, cannot disable the FCoE VLAN. Probable Cause Indicates that the specified Fibre Channel over Ethernet (FCoE) VLAN is used in the FCoE daemon (fcoed) and therefore cannot be disabled. Recommended Disable FCoE VLAN by removing all - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 613
NSM-1007 77 NSM-1007 Message , [NSM-1007], ,, INFO, , Chassis is . Probable Cause Indicates whether chassis is enabled or disabled. Recommended No action is required. Action Severity INFO NSM-1008 Message , [NSM-1008], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 614
77 NSM-1011 NSM-1011 Message , [NSM-1011], ,, INFO, , OperationalEndpointMode changed from to for interface . Probable Cause Indicates that the interface Operational Endpoint mode has been changed. Recommended No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 615
NSM-1015 77 NSM-1015 Message , [NSM-1015], ,, INFO, , VLAN classifier rule is deleted. Probable Cause Indicates that the specified VLAN classifier rule has been deleted. Recommended No action is required. Action Severity INFO NSM-1016 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 616
NSM-1019 NSM-1019 Message , [NSM-1019], ,, INFO, , Interface is administratively up. Probable Cause Indicates that the administrative status of the specified interface has changed to up. Recommended No action is required. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 617
INFO ONMD-1002 Message , [ONMD-1002], ,, INFO, , LLDP global configuration is changed. Probable Cause Indicates that the LLDP global configuration has been changed. Recommended No action is required. Action Severity INFO ONMD-1003 Message Probable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 618
. Action Severity INFO ONMD-1005 Message , [ONMD-1005], ,, INFO, , Using auto-sense on interface to update DCBX version. Probable Cause Indicates that the auto-sense feature is used to detect the Data Center Bridging eXchange (DCBX - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 619
configuration file during the installation. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 620
configuration file sync.conf contains too many entries. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 621
Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1008 Message , [PDM - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 622
; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1013 Message Probable Cause , [PDM-1013], ,, WARNING, , File empty: Indicates the switch configuration file /etc/fabos/fabos.[0|1].conf is empty - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 623
Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PDM-1019 Message , [PDM - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 624
service provider. Severity WARNING PDM-1022 Message , [PDM-1022], ,, WARNING, , The switch is configured only with IPv6. Probable Cause Indicates that the parity data manager (PDM) cannot synchronize with its peer because the firmware does not support - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 625
the parity data manager (PDM) cannot synchronize with its peer because the user defined roles are configured. User defined roles are not supported by older firmware. Recommended Remove the configured user defined roles. Action Severity WARNING Fabric OS Message Reference 539 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 626
79 PDM-1026 540 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 627
The watchdog register codes are as follows: • 0x10000000 bit set means that the watch dog timer (WDT) forced a core reset. • 0x20000000 bit set means that the WDT forced a chip reset. • All other code values are reserved. Recommended Run the pdShow command to view the panic dump and core dump files - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 628
80 PDTR-1002 542 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 629
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PLAT-1001 Message , [PLAT-1001 CP. Note that in certain circumstances a CP may experience a double reset and reboot twice in a row. A CP can recover automatically even - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 630
reset interrupts>. Probable Cause Indicates a PCI bus hang was detected. Recommended The FRU must be replaced. Action Severity CRITICAL PLAT-1004 Message , [PLAT-1004], , FFDC, CRITICAL, , Switch has older FPGA rev 0x - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 631
Severity WARNING PMGR-1003 Message , [PMGR-1003], , INFO, , Attempt to delete switch succeeded. Probable Cause Indicates that the switch with the specified FID was successfully deleted. Recommended No action is required. Action Severity INFO PMGR - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 632
Action Severity INFO PMGR-1006 Message , [PMGR-1006], , WARNING, , Attempt to move port(s) on slot to switch failed. Error message: . Probable Cause Indicates the unsuccessful attempt to move the ports to the specified - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 633
Recommended No action is required. Action Severity INFO PMGR-1010 Message , [PMGR-1010], , WARNING, , Attempt to change the base switch to switch failed. Error message: . Probable Cause Indicates the failed attempt to change the base - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 634
82 PMGR-1011 548 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 635
the port. This problem is typically related to hardware. Check and replace (if necessary) the hardware attached to both ends of the specified support configured L_port. Issue portCfgLport to clear configuration. Indicates the specified port is configured to be an L_port, but the port does not support - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 636
changed for port (ID: ) in No_Module or No_Light state. Probable Cause Indicates the configuration changes were made to an offline port in No_Module or No_Light state. Recommended No action is required. Action Severity INFO PORT-1007 Message , [PORT- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 637
PORT-1010 83 Recommended No action is required. Action Severity INFO PORT-1010 Message , [PORT-1010], ,, INFO, , Port (ID: ) QOS is disabled. Probable Cause The Port QOS is disabled because the port currently has Best Effort Setting that - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 638
83 PORT-1010 552 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 639
not happen, restart Action or power cycle the switch to re-initiate the firmware. Severity CRITICAL PS-1001 Message Probable Cause Recommended Action Severity , [PS-1001], ,, INFO, , Advanced Performance Monitoring configuration updated due to change in - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 640
domain id>, because end-to-end monitors are configured on this switch. Probable Cause Indicates the end-to-end monitors are configured on the switch. Recommended Delete the end-to-end monitors on that switch and re-install the fabricmode TopTalker monitor. Action End-to-end monitors and fabricmode - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 641
on this particular fabric. Recommended Action No action required. Top Talker cannot be installed on fabric with FC router or McData mode enabled. In case if the top talker has to be installed on fabric, FC router and McData mode has to be disabled. Severity WARNING PS-1008 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 642
84 PS-1009 556 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 643
Probable Cause Indicates that the portSwap feature has been enabled in the switch. Recommended No action is required. Action Severity INFO PSWP-1003 Indicates that the portSwap command feature has been disabled in the switch. Recommended No action is required. Action Severity INFO Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 644
in switch number . Probable Cause Indicates that the bladeSwap command has failed to access the configuration data. Recommended Retry the command. If the failure persists, contact your support representative. Action Severity WARNING PSWP-1007 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 645
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the Action supportSave command and contact your switch service provider. Severity INFO RAS-1002 Message , [RAS-1002], ,, WARNING, , First failure data capture (FFDC - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 646
your switch service provider. Severity WARNING RAS-1006 Message , [RAS-1006], , INFO, , Support data designated by user> '. Probable Cause Indicates that the support data was automatically transferred from the switch to the configured remote server. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 647
, [RAS-2003], , INFO, , Audit message class configuration has been changed to . Probable Cause Indicates that the audit event class configuration has been changed. Recommended No action is required. Action Severity INFO RAS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 648
86 RAS-3003 RAS-3003 Message , [RAS-3003], , WARNING, , USB storage device was unplugged before it was disabled. Probable Cause Indicates that the USB storage device was unplugged before it was disabled. Recommended Disable the USB storage device using - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 649
.1 and later. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity INFO RCS-1002 Message , [RCS Check the memory usage on the switch using the memShow command. Restart or power cycle the switch. Severity ERROR Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 650
and later. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS system-name>, State , Application AD, RCS CM. Domain - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 651
Severity ERROR RCS-1009 Message , [RCS-1009], ,, INFO, , Request remote domain offline because it does not support RCS. Probable Cause Indicates a remote domain is requested to go offline, to take it out of the fabric, because it does not - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 652
Indicates the remote domain is non-RCS and necessary action need to be taken to join RCS fabric. Recommended Configure the remote domain as RCS capable switch. Action Severity ERROR RCS-1011 Message , [RCS-1011], ,, ERROR, , Remote domain - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 653
Metadata)> operation.\n. No response from cluster member WWN: Slot: . Probable Cause Indicates that a First time encryption/re-key/Write Metadata was not started. Recommended Correct the Cluster Ethernet link error and retry. Action Severity ERROR RKD-1003 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 654
/decrypt> that will be used for encryption/decryption of the LUN. Probable Cause Indicates an uncompressible data on blocks 1-16 of the LUN. Recommended Migrate the data on this LUN to a larger LUN and add it to the container with -newLUN option. Action Severity WARNING 568 Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 655
Chapter RMOND System Messages 89 RMON-1001 Message , [RMON-1001], ,, INFO, , RMON rising threshold alarm from SNMP OID . Probable Cause Indicates that the threshold level has exceeded for the sample type of the remote monitoring (RMON) alarm. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 656
89 RMON-1002 570 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 657
IP address>\" has bad credentials: Indicates an authentication error was reported. The specified client IP address has faulty credentials. Recommended Enter the correct user name and password file configured on the switch could not be accessed because the root did - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 658
Recommended To enable RPCD in Secure mode, install a valid SSL certificate in the switch. Action Severity WARNING RPCD-1005 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 659
(DPS) are not synchronized from active control processor (CP) to standby CP during the failover. This event causes route inconsistencies. Recommended Reset all E_ports on the chassis using the portDisable and portEnable commands. Action Severity ERROR Fabric OS Message Reference 573 53-1002448 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 660
91 RTE-1001 574 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 661
Count • detail4: Status • detail5: Process ID Recommended Action Run the fabricShow command to see if the specified domain ID is online. Enable the switch with the specified domain ID. If the message persists, run the supportFtp command (as needed) to set up automatic FTP transfers and run the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 662
ID is reachable. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers and run the supportSave command then contact your switch service provider. Severity INFO 576 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 663
valid values for daemon name are listed below. For a complete listing, see the Introduction to this manual. • fabricd • asd • evmd • fcpd • webd • msd • nsd • psd • snmpd supportSave command and contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 577 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 664
daemon, the software watchdog will cause the daemon to dump the core and reboot the switch. In this case, run the supportSave command to send the core files using FTP to supportSave command and contact your switch service provider. Severity ERROR 578 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 665
database sent from the primary fabric configuration server (FCS) switch. This might be caused by several factors: the data package may be corrupted, the time stamp on the package may be out of range as a result of replay attack or out-of-sync time service, or the signature verification failed - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 666
the specified number of attempts, and that the failed switch encountered an error accepting the database download. The primary switch will segment the failed switch after 30 tries. Recommended Action Reset the version stamp on the switch to 0 using the secVersionReset command and then rejoin the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 667
establish API connection. Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the API connection. Action Severity INFO SEC-1008 Message , [SEC - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 668
key infrastructure (PKI) objects exist on the switch. If the private key does not exist, follow the steps for recreating PKI objects, outlined in the Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the certificate by following the field upgrade process - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 669
, , Invalid IP address () detected. Probable Cause Indicates a corruption occurred during the distribution of the security database. This can occur only when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 670
occur only when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, then local sync. Probable Cause Indicates the security database size is not supported by the standby control processor (CP). Recommended Reduce the security - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 671
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 672
94 SEC-1035 SEC-1035 Message , [SEC-1035], ,, ERROR, , Invalid device WWN . Probable Cause Indicates the specified world wide name (WWN) is invalid. Recommended Enter the correct WWN value. Action Severity ERROR SEC-1036 Message < - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 673
SEC-1040 94 SEC-1040 Message , [SEC-1040], ,, ERROR, , Invalid portlist (). Cannot combine * with port member in the same portlist. Probable Cause Indicates the port list contains the wildcard asterisk (*) character. You cannot use the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 674
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 675
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 676
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 677
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 678
domains more than the maximum number supported are specified. Recommended Enter the , Failed to reset statistics. Probable Cause Indicates that public key infrastructure (PKI) objects on the switch are not in a valid state and the PKI objects and install the certificate by following the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 679
reasons. Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1071 Message , [SEC-1071], ,, ERROR, , No new security policy data to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 680
switch service provider. Severity ERROR SEC-1074 Message , [SEC-1074], ,, ERROR, , Cannot execute the command on this switch. Please check the secure mode and FCS configuration server (FCS) is distributing the security database to the other switches in - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 681
. Probable Cause Indicates the NoNodeWWNZoning option has been changed. If the option is turned on, a zone member can be added using node WWNs, but the member will not be able to communicate with others nodes in the zone. Recommended Re-enable the current zone configuration for the change to take - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 682
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 683
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 684
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 685
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 686
has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 687
transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR SEC-1098 Message , [SEC-1098 occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 688
,, ERROR, , FCS switch present. Command terminated. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 689
switch has a valid certificate installed and retry the operation. If a valid certificate is not installed, install a certificate by following the procedure specified in the Secure Fabric OS Administrator's Guide configuration server (FCS) is distributing the security database to the other switches - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 690
name>, Fail to reset stamp on all switches. Probable Cause Indicates that a version reset operation failed either because the switch could not get all the defined security database. Recommended Download a correct configuration with the fabric configuration server (FCS) policy as the first policy - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 691
policies, and the same as the current active FCS list in the switch. Probable Cause Indicates that either a security policy download is attempted with an active policy that does not have the fabric configurations server (FCS) policy as the first policy or the FCS policy is not same as the current - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 692
failed to save the data received by the primary fabric configuration server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Recommended Run the secFabricShow command to verify that all switches in the fabric are in the ready state - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 693
switch is not synchronized with the primary fabric configuration server (FCS), the data packet is corrupted, or a replay attack is launched on the switch downloaded by Primary FCS. Indicates the security database was successfully downloaded from the primary fabric configuration server (FCS). - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 694
-name>, The Primary FCS has failed over to a new switch. Probable Cause Indicates an fabric configuration server (FCS) failover operation was , , Secure fabric version stamp has been reset. Indicates the version stamp of the secure fabric is reset. 608 Fabric OS Message Reference - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 695
database sent from the primary fabric configurations server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed. Signature - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 696
configuration server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service the specified policies have changed. • The passwords have changed for the specified accounts. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 697
support RCS, obtain the latest firmware version from your switch supplier, and run the firmwareDownload command to upgrade the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 698
the failed command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO 612 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 699
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation System is already in secure mode. Lockdown option cannot be applied. Indicates the lockdown option was attempted while the fabric is already in - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 700
-number>,, ERROR, , Lockdown option cannot be applied on a non-FCS switch. Probable Cause Indicates the attempt to enable security is made on a switch that is not present in the fabric configuration server (FCS) list. Recommended Add the switch to the FCS policy list when using the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 701
be executed on the Primary FCS switch, the first reachable switch in the FCS list. Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 702
contact with Primary FCS switch. Probable Cause Indicates the switch has lost contact with the primary fabric configuration server (FCS) switch in the secure -name>, Failed to set password. Indicates the fabric configuration server (FCS) or non-FCS password could not be set. 616 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 703
version stamp. Probable Cause Indicates the primary fabric configuration server (FCS) failed to generate a new version stamp due to the fabric not being stable. Recommended Verify all switches -number>,, INFO, , Added account with authorization. Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 704
switch service provider. Severity ERROR SEC-1184 Message , [SEC-1184], ,, INFO, , configuration Authentication Dial-in User Service (RADIUS) / Lightweight Directory Access Protocol (LDAP) server configuration. The possible - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 705
RADIUS/LDAP)> Configuration. Probable Cause Indicates the remote authentication dial-in user service (RADIUS/LDAP) configuration was enabled or disabled as it is not included in the SCC policy, add the switch to the policy. If the switch is not allowed access to the fabric, this is a valid - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 706
name> tries to FLOGI to index/area of switch . Probable Cause Indicates a device connection control (DCC) security >,, INFO, , Security violation: Unauthorized host with IP address tries to do SNMP read operation. Probable Cause Indicates - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 707
to log in through the specified connection method; the login failed. Recommended The error message lists the violating IP address. Verify that this IP address is being used by a valid Action switch admin. Use the correct password. Severity INFO Fabric OS Message Reference 621 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 708
>,, WARNING, , Switch does not have all default account names. Probable Cause Indicates the default switch accounts admin and user do not exist on the switch when enabling security. Recommended Reset the default admin and user account names on the switch that reported the warning and - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 709
-name>, Changed account . Probable Cause Indicates if the host IP address specified in the message FCS switch. Indicates a management server (MS) forward security violation was reported. A management server command was forwarded from a non-primary fabric configuration server (FCS) switch - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 710
MS device operation occurred on a non-primary fabric configuration server (FCS) switch. Recommended Action Check the management server policy and information: Login successful via TELNET/SSH/RSH. IP Addr: Probable Cause Indicates the IP address of the remote station logging in. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 711
run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message Probable Cause , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Indicates the switch is set up with VC-encoded mode - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 712
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds the firmware to the latest version for your specific Action switch. Verify the firmware you are installing supports the Brocade Secure - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 713
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation outlined in the Secure Fabric OS Administrator's Guide. If PKI objects are valid, verify that an unauthorized switch is not trying to access the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 714
Probable Cause Indicates that all servers in the remote authentication dial-in user service (RADIUS) configuration have failed to respond to a switch request within the specified time-out. Recommended Verify the switch has proper network connectivity to the specified remote authentication dial-in - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 715
was planned, run the passwdCfg --setDefault command on each switch in the fabric to set the password policies to the default value. Then verify with passwdCfg --show that password policies are set to the default values on all switches and retry the secModeEnable command. Severity ERROR SEC-1312 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 716
this error. If the problem persists contact your switch service provider. Action Severity ERROR SEC-1315 Message , [SEC-1315], ,, ERROR, , command failed - db(s) configured for rejection on this - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 717
fabric with strict fabric wide policy Probable Cause Indicates that a domain not supporting an access control list (ACL) policy tried to join a fabric with fabric because the switch has a conflicting configuration such as fabric wide consistency configuration or AD configuration. Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 718
support a device connection control (DCC) policy with more than 256 ports. Recommended Reconfigure any policy that includes more than 256 ports in its member list, then save the policy Action configuration Probable Cause Indicates the reliable commit service (RCS) transaction failed with the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 719
attempt to join the switch with the fabric. Severity ERROR SEC-1326 Message , [SEC-1326], ,, INFO, , Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set to . Probable Cause Indicates the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 720
backup fabric configuration server (FCS) switch or from a non-FCS switch. Recommended Verify the distribution is initiated by the primary FCS switch. Use on the fabric because default IP Filter policies are not active on the switch, or an active transaction exists on IP Filter policies. Recommended - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 721
Cause Indicates the fabric-wide policy is conflicting. Recommended Remove either the FCS from the fabric-wide policy, or remove 5.3 and 5.2 switches from the fabric, Action or set the fabric-wide mode for FCS as Strict. Severity ERROR SEC-1333 Message , [SEC-1333], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 722
policy with the local switch. Recommended Check the conflicting policy and make the new switches and the local switch policies the same. Action Status: success, Info: ipfilter policy(ies) saved. Probable Cause Indicates that the specified IP filter policy has been saved. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 723
Cause , [SEC-3039], , INFO, , Event:Securty Violation , Status: failed, Info: Unauthorized host with IP address tries to establish connection using . Indicates that a security violation was - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 724
94 SEC-3050 Recommended Check for unauthorized access to the switch through the specified protocol connection. Action Severity INFO SEC-3050 Message , [SEC-3050], , INFO, , Event: , Status: success, Info: < - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 725
. Action Severity INFO SEC-3066 Message Probable Cause , [SEC-3066], , INFO, , Configuration of user-defined roles is downloaded. Indicates the configuration of user-defined roles have been downloaded. Fabric OS Message Reference 639 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 726
list. Action Severity WARNING SEC-4001 Message , [SEC-4001], , AUDIT, INFO, , Client logged in . Probable Cause Indicates the client has logged in. Recommended No action is required. Action Severity INFO 640 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 727
Chapter SFLO System Messages 95 SFLO-1001 Message , [SFLO-1001], ,, INFO, , sFlow is globally. Probable Cause Indicates that sFlow is globally enabled or disabled. Recommended No action is required. Action Severity INFO SFLO-1002 Message < - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 728
number>,, INFO, , is as as sFlow collector. Probable Cause Indicates that the sFlow collector is configured or not configured. Recommended No action is required. Action Severity INFO SFLO-1008 Message Probable Cause , [SFLO-1008], ,, INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 729
Recommended No action is required. Action Severity INFO SFLO-1008 95 Fabric OS Message Reference 643 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 730
95 SFLO-1008 644 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 731
that the Simple Network Management Protocol (SNMP) service could not be started because of the specified reason. Therefore, you will not be able to query the switch through SNMP. Recommended Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 732
, [SNMP-1006], ,, INFO, , configuration was reset to default. Probable Cause Indicates that the specified SNMP configuration group was reset to the factory default. Recommended Execute the snmpConfig --show for the group to view - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 733
SNMP-1008 96 SNMP-1008 Message , [SNMP-1008], ,, INFO, , The last device change happened at: . Probable Cause Indicates the last device change time. Recommended Execute the nsshow command to view the current device status. Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 734
96 SNMP-1009 648 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 735
1003], ,, ERROR, , S, Security Processor faulted. Probable Cause Indicates the security processor is -bladed system, execute the fastboot command on the switch. Severity ERROR Fabric OS Message Reference 649 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 736
INFO SPC-2004 Message Probable Cause , [SPC-2004], ,, ERROR, , S, : FPGA firmware download failed: 0x. Indicates the FPGA download has failed. 650 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 737
number containing Encryption Engine>, : FPGA firmware download success: 0x. Probable Cause Indicates the FPGA download was S, : Crypto post tests failed: 0x. Probable Cause Indicates the Crypto Power-On Self-Test - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 738
], ,, CRITICAL, , S, : Tamper event: User zeroization. Probable Cause Indicates the Tamper event triggered due to a user zeroize request. The Encryption Engine (EE) is zeroized. Recommended Execute the cryptocfg - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 739
WARNING, , S, : Oscillator Failure Detected. Probable Cause Indicates hardware failure. Recommended Shelf life of the system may be reduced. Contact the vendor for further instructions. Action Severity WARNING SPC-2014 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 740
timestamp>, [SPC-2041], ,, ERROR, , S, : Alloc freemsg block failed. Probable Cause Indicates an allocation failure for pool for switch board (SB) message. Recommended No action is required. Action Severity ERROR - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 741
No action is required. Action Severity WARNING SPC-3001 Message , [SPC-3001], ,, ERROR, , S, : No input KEK for DEK inject, DEK: , KEK: - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 742
3005], ,, ERROR, , S, :DEK inject error: , upon inject • 73 - Invalid KEK format Recommended Contact your switch service provider for assistance. Action Severity ERROR SPC-3006 Message Probable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 743
switch service Action provider. Severity ERROR SPC-3007 Message , [SPC-3007], ,, ERROR, , S, : FIPS certificate mismatch, certificate: . - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 744
. Probable Cause Indicates an attempt to store Crypto Module internal data using the Secret Encryption Key failed most likely, the EE has been zeroized or tampered with. Recommended Execute the cryptocfg --initEE and cryptocfg --regEE commands - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 745
random number generator has failed. Recommended Contact your switch service provider for assistance. Action Severity ERROR SPC-3015 Message , [SPC-3015], ,, ERROR, , S, : RSA pairwise key generation - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 746
97 SPC-3015 660 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 747
to initialize. Recommended Check the system resources and restart the switch. Action Severity ERROR SPM-1002 Message , [SPM-1002 KV Type . Probable Cause Indicates a new group has been configured. Recommended No action is required. Action Severity INFO SPM-1004 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 748
SPM-1005], ,, INFO, , Set EE Control slot action . Probable Cause Indicates encryption engine (EE) control slot configuration. Recommended No action is required. Action Severity INFO SPM-1006 Message , [SPM-1006], ,, INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 749
, [SPM-1011], ,, INFO, , Group Cfg Changed Quorum Size . Probable Cause Indicates that a group configuration has changed the quorum size. Recommended No action is required. Action Severity INFO SPM-1012 Message Probable Cause , [SPM - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 750
Indicates the Master Keys downloaded will not be effective unless imported as the EE may have different MK configured. Recommended Import required MK security database. Recommended Use cryptocfg --sync -securitydb to manually sync security db. Action Severity WARNING 664 Fabric OS Message Reference - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 751
versions of FOS. Probable Cause Indicates a failure to distribute security database. Recommended Use the cryptocfg --sync -securitydb command to manually EE in slot initialized. Probable Cause Indicates an encryption engine was initialized. Recommended No action is required. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 752
], ,, INFO, ,Event: cryptocfg Status: success, Info: EE in slot disabled. Probable Cause Indicates an encryption engine was disabled. Recommended No action is required. Action Severity INFO SPM-3006 Message , [SPM-3006], ,, INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 753
Event: cryptocfg Status: success, Info: DH challenge generated for vault IP . Probable Cause Indicates a DH challenge was generated for a Info: EE in slot zeroized. Probable Cause Indicates an encryption engine was zeroized. Recommended No action is required. Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 754
-name>,Event: cryptocfg Status: success, Info: key vault registered. Certificate label: \"\" Certificate file: \"\" IP address: . Probable Cause Indicates a key vault was registered. Recommended No action is required. Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 755
SPM-3016 98 Recommended No action is required. Action Severity INFO SPM-3016 Message , [SPM-3016], ,, INFO, ,Event: cryptocfg Status: success, Info: Master key generated. Probable Cause Indicates a master key was generated. Recommended No action is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 756
98 SPM-3020 Recommended No action is required. Action Severity INFO SPM-3020 Message , [SPM-3020], ,, INFO, , Event: cryptocfg Status: success, Info: System card with certificate label \"\" deregistered. Probable Cause Indicates a system card - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 757
, [SPM-3027], ,, INFO, ,Event: cryptocfg Status: success, Info: Recovery card registered. Certificate label: \"\" Certificate file: \"\". Indicates a recovery card was registered. Fabric OS Message Reference 671 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 758
98 SPM-3028 Recommended No action is required. Action Severity INFO SPM-3028 Message , [SPM-3028], ,, INFO, , Event: SPM-EE state changed, Info: EE State: . Probable Cause Indicates an EE state has changed. Recommended No action is required. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 759
uploaded support information to the host with IP address . Probable Cause Indicates that the supportSave command was used to transfer support command to set the FTP or SCP Action parameters. After the problem is corrected, execute the supportSave command again. Severity WARNING SS- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 760
storage device settings. After the USB problem Action is corrected, execute the during supportsave. Retry supportsave with -t option to collect all logs. Probable Cause Indicates Number>. Reason: No IP connection. Probable Cause Indicates that there is no IP connection between the Active - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 761
BP/DP)>. Probable Cause Indicates that there is no Inter-Subsystem Communication (ISC) connection for the specified node slot. Recommended Restart the switch using the reboot command and then execute the supportSave command. Action Severity WARNING Fabric OS Message Reference 675 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 762
99 SS-1009 676 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 763
Check the memory usage on the switch using the memShow command. Restart or power cycle the switch. Severity ERROR SSMD-1002 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 764
initialization. Recommended Restart or power cycle the switch. If the probelm persists, download a new firmware using the Action firmwareDownload command. Severity ERROR SSMD-1006 Message , [SSMD-1006], ,, ERROR, , Error while configuring ACL - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 765
Limit feature. Recommended Action Delete and reapply Quality of Service (QoS) Multicast Rate Limit policy using the qos rcv-queue multicast rate-limit command. If the problem persists, restart or power cycle the switch. Severity WARNING SSMD-1201 Message , [SSMD-1201], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 766
Delete and reapply the QoS 802.3x Pause flow control policy using the qos flowcontrol command. If the problem persists, restart or power cycle the switch. Severity WARNING SSMD-1203 Message , [SSMD-1203], ,, WARNING, , QoS failed programming interface 0x - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 767
for enforcing the CEE Map Class of Service (CoS) to Priority Group ID (PGID) mapping feature. Recommended Action Delete and reapply the CEE Map CoS to PGID policy using the cee-map default command. If the problem persists, restart or power cycle the switch. Severity WARNING SSMD-1207 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 768
reapply the QoS interface CoS to Traffic Class policy using the qos cos-traffic-class command. If the problem persists, restart or power cycle the switch. Severity WARNING SSMD-1211 Message , [SSMD-1211], ,, WARNING, , QoS failed programming ASIC - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 769
Delete and reapply the QoS CoS Tail Drop Threshold policy using the qos rcv-queue command. If the problem persists, restart or power cycle the switch. Severity WARNING SSMD-1215 Message Probable Cause , [SSMD-1215], ,, WARNING, , QoS failed programming - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 770
using the qos rcv-queue command. If the problem persists, restart or power cycle the switch. Severity WARNING SSMD-1216 Message , SSM was unable to translate the CEE Map and Fibre Channel over Ethernet (FCoE) configuration into an ETS scheduler policy implementable by the dataplane - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 771
100 SSMD-1302 Recommended No action is required. Action Severity INFO SSMD-1302 Message , [SSMD-1302], ,, INFO, , CEE Map priority table is . Probable Cause Indicate that the priority groups (PGs) have been added to or removed - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 772
100 SSMD-1306 Recommended No action is required. Action Severity INFO SSMD-1306 Message , [SSMD-1306], ,, INFO, , CEE Map priority group is PFC . Probable Cause Indicates that the specified PG PFC status has been changed. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 773
configured on interface . Probable Cause Indicates that the specified access list has been configured on the interface assigned to interface . Probable Cause Indicates that the specified user profile map has been assigned to the interface. Recommended No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 774
with the current firmware and therefore it is reset to default. Recommended No action is required. Action Severity INFO SSMD-1316 Message Probable Cause , [SSMD-1316], ,, INFO, , CEE Map is reset to default configuration. Indicates that the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 775
100 SSMD-1318 Recommended No action is required. Action Severity INFO SSMD-1318 Message , [SSMD-1318], ,, INFO, , ACL is being removed from interface . This operation could take a long time. Probable Cause Indicates that the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 776
100 SSMD-1318 690 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 777
Action Do not fail over or power down the system during firmware upgrade. Allow the firmwareDownload command command has completed successfully and switch firmware has been updated. Recommended the firmwareShow command to verify the firmware versions. Severity INFO SULB-1003 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 778
. Probable Cause Indicates the previous standby CP has now become the active CP and is running the new firmware version. Recommended Action No action is required. The firmwareDownload command is progressing as expected. Run the firmwareDownloadStatus command for more information. Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 779
on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby CP - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 780
101 SULB-1009 TABLE 7 Status messages and status codes (Continued) Status message "Unable to check the firmware version on Standby CP due to IPC error." "Unable to restore the original firmware due to Standby CP timeout." "Standby CP failed to reboot and was not responding." "Unable to check the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 781
started to restore the secondary partition." 0x93 "firmwareCommit failed." 0x94 "The secondary partition has been restored successfully." 0x95 "Firmware is being downloaded to the blade. This step may take up to 10 minutes." 0xa0 "firmwareDownload timed out." 0xa1 "Reboot occurred during - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 782
. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 783
your service provider for recovery." 0x28 "The pre-install script failed." 0x29 "The platform option is not supported. Run chassisConfig to reset the option first and then try 0x2a firmwareDownload." "Failed to install RPM package." 0x2b "Cannot downgrade directly to this version. Downgrade - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 784
- The pre-install script failed. This error may be caused by an unsupported blade type in the chassis. Remove or power off the unsupported blades before proceeding. Another possible cause may be an invalid chassisConfig option setting. In that case, reset the chassisConfig option before retrying - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 785
firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting inconsistent filesystem, contact your switch service provider. Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 786
re-insert the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message , [SULB-1021],, WARNING, , Firmware is being downloaded to the blade in slot . Probable - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 787
by powering off and end of firmwareCommit, the blade firmware version is still inconsistent with the active CP firmware, firmwareDownload will automatically be restarted on the blade. Run the firmwareDownloadStatus command to monitor the progress. If the problem persists, contact your switch service - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 788
monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message Probable Cause , [SULB-1031], , WARNING, , The switch is relocating an internal firmware image. Indicates the switch has rebooted with the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 789
firmware image on the CP. Probable Cause Indicates the switch has started a firmware download switch. Recommended Run the firmwareShow command to verify the firmware versions. Run the switchShow command to Action make sure the switch If the problem persists, contact your switch service provider. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 790
download of the firmware to store version information. Recommended No action is required. Action Severity INFO SULB-1037 Message , [SULB-1037], , ERROR, , HCL failed. Reboot the switch manually using the reboot command. However, it will disrupt the FC - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 791
Action Run the firmwareShow command to verify the firmware versions. Run the firmwareDownload command again if the firmware is not updated. This will cause the internal image to be relocated again. If the problem persists, contact your switch service provider. Severity WARNING SULB-1041 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 792
has completed as expected. Run the firmwareShow command to verify the firmware versions. Severity INFO SULB-1043 Message Probable Cause , [SULB and switch will come up with updated firmware on reboot. Recommended No action is required. Switch will auto reboot with downloaded firmware. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 793
the supportSave command and contact your switch service provider. Severity ERROR SWCH-1002 Message recovery. Recommended Action On a Brocade 24000 or 48000 switch, run the slotPowerOff command and then the slotPowerOn command. On a Brocade 7500 or AP7600 switch, reboot or power cycle the switch - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 794
failover or recovery. Recommended Action On a Brocade 24000 or 48000 switch, run the slotPowerOff command and then the slotPowerOn command. On a Brocade 200E, 3250, 3850, 3900, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, or AP7600 switch, reboot or power cycle the switch Severity ERROR - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 795
Indicates the blade is enabled with the port configuration that does not support port swap. Recommended Action Replace the blade with ports that support port swap. Then swap the ports back to the ports default area. Refer to the Fabric OS Administrator's Guide for more information on port swapping - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 796
-1011 Refer to the Fabric OS Administrator's Guide for more information. Severity WARNING SWCH-1011 Message , [SWCH-1011], ,, WARNING, , HA state out of sync: Standby CP (ver = ) does not support Trunk Area functionality. (active ver - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 797
disabled and the configuration file has been problem or due to file corruption. Recommended Action Restart or power cycle the switch If the message persists, run the firmwareDownload command to update the firmware supported on the Loop device. Fabric OS Message Reference 711 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 798
supported configuration > has user area < version>) does not support QOS links to AG (Active CP version = ). Probable Cause Indicates the standby control processor (CP) does not support links to AG running QOS. Recommended Load a firmware version on the standby CP that supports - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 799
CP (ver = ) does not support Dynamic area on default switch (Active CP version = ). Probable Cause Indicates the standby control processor (CP) does not support dynamic area on default switch. Recommended Load a firmware version on the standby CP that - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 800
102 SWCH-1022 714 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 801
Indicates that on system startup, the option configuration file corresponding to the chassisConfig option read could not be found. This indicates that option is not supported on this platform running this version of the firmware. Fabric OS Message Reference - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 802
Brocade 24000 and 48000. Recommended Action As indicated in the message, run the chassisConfig command to change to one that is valid on this platform running this firmware. Note that the chassisConfig option Use the supportSave command to gather troubleshooting data. Issue a reboot or haFailover - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 803
Action Run the memShow command to view the switch memory usage. Restart or power cycle the switch. Run the supportFtp command to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL SYSM-1002 Message , [SYSM - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 804
Message , [SYSM-1004], ,, ERROR, , Failed to retrieve current chassis configuration option, ret= Probable Cause Indicates there was a failure to read configuration data from the WWN card. Recommended Verify that the world wide name (WWN) card is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 805
TAPE System Messages Chapter 105 TAPE-1001 Message , [TAPE-1001], , FFDC, INFO, , Key acquisition for . Probable Cause Indicates that the key acquisition for the pool or the container has begun or is complete. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 806
105 TAPE-1001 720 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 807
FTP transfers; then run the supportSave Action command and contact your switch service provider. Severity WARNING TRCE-1002 Message , [TRCE-1002], ,, INFO, , Trace dump automatically transferred to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 808
Action command and contact your switch service provider. Severity ERROR TRCE-1006 Message Probable Cause , [TRCE-1006], ,, INFO, , FTP Connectivity Test succeeded to FTP site ' '. Indicates that a connectivity test to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 809
FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL TRCE-1009 Message , [TRCE- trace information to active CP. This message is only applicable to the Brocade 24000 and 48000. Recommended Action Run the haShow command to verify - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 810
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually transferred to target ' - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 811
name or password is incorrect. Recommended Action This message indicates a typing error by the user. If this message occurs repeatedly, it might indicate an unauthorized user trying to gain access to a switch. When Secure mode is enabled on the fabric, the IP address of a failed login is reported - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 812
Config file change from task:. Probable Cause Indicates the track change feature recorded a configuration change for the switch. The track change feature records any change to the configuration file in nonvolatile memory, including a configDownload command. This message is not generated for - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 813
that the principal or primary FCS switch has the clock server IP configured correctly. Verify this clock server is accessible to the switch and functional. If the principal or primary FCS does not support the feature, either choose a different switch for the role or reset the clock server to LOCL - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 814
message might be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits. • Synchronizing time reconfiguration or role change of the principal or primary fabric configuration server (FCS) switch. If the message does not recur, it should be - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 815
number>, should be Probable Cause Indicates the switch detected an inconsistency in the routing database between the routing protocol and the hardware configuration. The first port number displayed is what the hardware has configured and the second port number displayed is what the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 816
1021 Message , [UCST-1021], ,, INFO, , In-order delivery option has been enabled. Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery of frames during topology changes. Recommended No action is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 817
, [UCST-1025], ,, INFO, , In-order delivery option has been enabled with Lossless-DLS option. Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery of frames during topology changes. Recommended No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 818
109 UCST-1027 732 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 819
is required. This will end the current SPF computation. configuration. Probable Cause Recommended Action Indicates the specified switch is unreachable because of the TI zone and the fabric configuration incompatibility. Clear all TI zones and refer to the TI zone user manual for instructions - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 820
110 UPTH-1002 734 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 821
, Could not find Virtual PWWN config file for the switch. Probable Cause Indicates that the configuration file is corrupted or accidently removed. Recommended Restart the switch and download the configuration using the configdownload command. Action Severity ERROR Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 822
been enabled for the first time on the switch or the configuration file was corrupted or accidently removed. Recommended Creating a new default configuration file. Execute the configdownload command to download any Action of your earlier configuration for the virtual PWWN feature. Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 823
VS-1008 111 VS-1008 Message , [VS-1008], ,, INFO, , Virtualization services failed to create timer. Probable Cause Indicates failure in virtualization service daemon (vsd) start up because vsd has failed to create a timer. Recommended No action is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 824
111 VS-1008 738 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 825
sequence-number>,, WARNING, , Missing or Invalid Key file -- HTTPS is configured but could not be started. Probable Cause Indicates the SSL key file is either invalid or absent. Recommended Install a valid key file. Action Severity WARNING WEBD-1004 Message , [WEBD-1004 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 826
will be restarted due to change of IP Address. Probable Cause Indicates the IP address of the switch changed and the HTTP server is restarted. , where the built-in recovery process has failed to restore HTTP services. The problem often results from invalid configuration of SSL certificates, but - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 827
Initiator ID>//. Probable Cause Indicates a missed frame with one or more FCP data information units during a SCSI write or read operation. Recommended If there was an unexpected job failure associated with this event, contact your customer support for Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 828
VE Port (Tunnel) Number> Message Transmission failed:I/T/L/E:/// on slot DP has been cleared. Indicates that a CLI command or a support save operation freed the trace buffer - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 829
Slot Number> dp has been triggered. Probable Cause Indicates that a programmed trigger event has been detected. Recommended If there was an unexpected job failure associated with this event, contact your vendor's customer Action support for assistance. Severity INFO XTUN-1998 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 830
. Recommended If the tunnel or circuit has not been administratively disabled or deleted, a possible network error or Action disruption Number> Pri QoS UP. Indicates that the specified quality of service for this tunnel is up. This applies to the data classes only. When the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 831
> Pri QoS DOWN . Probable Cause Indicates that the specified quality of service has gone down. This applies to the data classes only. If the f- down. Recommended If the tunnel or circuit has not been administratively disabled or deleted, a possible network error or Action disruption has - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 832
Probable Cause , [XTUN-2020], ,, INFO, , FCIP Tunnel DELETED (). Indicates that the specified tunnel has been administratively deleted. 746 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 833
Tunnel Circuit DELETED (). Probable Cause Indicates that the specified circuit has been administratively deleted. Recommended No action is required. Action Severity INFO XTUN-2022 Message , [XTUN-2022], ,, INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 834
113 XTUN-2024 XTUN-2024 Message , [XTUN-2024], ,, INFO, , FCIP Tunnel Circuit MODIFIED (). Probable Cause Indicates that the attribute is modified. In most cases, the attribute value - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 835
Determine whether the SFPs have Action deteriorated and the Fibre Channel cable is faulty. Replace the SFPs or cable internal error. All the ports on the blade or switch will be disruptive. Recommended Action For a bladed maintenance window. If the problem persists, replace the blade. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 836
-name>, S,C: Invalid DMA ch pointer, chan:, good_addr:0x bad_addr:0x. Probable Cause to Link Reset failure. Recommended Whenever this error is observed persistently, power cycle the faulted blade. If the problem persists, Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 837
114 ZEUS-1016 Recommended Whenever this error is observed persistently, power cycle the faulted blade. If the problem persists, Action replace the blade. Severity WARNING Fabric OS Message Reference 751 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 838
114 ZEUS-1016 752 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 839
problem persists, execute the supportFtp command (as needed) to set up automatic FTP Action transfers; then execute the supportSave command and contact your switch service the port number to a viable value in the effective configuration. Action Severity WARNING ZONE-1004 Message Probable Cause < - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 840
115 ZONE-1005 Recommended No action is required. Action Severity INFO ZONE-1005 Message , [ZONE-1005], ,, INFO, , HARD and SOFT zones(, ) definitions overlap. Probable Cause Indicates that a port is zoned with mixed devices (WWN - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 841
problem: • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch zone object. This message occurs only when enabling a zone configuration. Recommended Check the members of the zone using the using - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 842
Indicates that the QuickLoop feature is not supported in the current version of Fabric OS. QuickLoop zones are not supported in Fabric OS version 4.x or later. Even if the QuickLoop zoning configuration is enabled on the switch, it will not be supported. Recommended Edit the zone database to remove - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 843
FA zone QuickLoop zones are not supported in Fabric OS version 4.x or later. Recommended If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP Action transfers; then execute the supportSave command and contact your switch service provider. Severity ERROR ZONE - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 844
configuration has changed to . Probable Cause Indicates that the effective zone configuration problem persists, execute supportFtp (as needed) to set up automatic FTP transfers; then Action execute the supportSave command and contact your switch service - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 845
Bad Zone Config: The new configuration is not viable. • User Command: A user aborted the current zoning transaction. • Switch Shutting Down: The switch is currently shutting down. Most of these error conditions are transitory. Recommended Try again after sometime. Verify that only one administrator - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 846
problem persists, execute the supportFtp command (as needed) to set up automatic FTP Action transfers; then execute the supportSave command and contact your switch service , Switch is in interop mode. (switch, port) members not supported. Probable Cause Indicates the switch is set to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 847
message . Probable Cause Indicates that the Fabric OS cannot rename the zone configuration file. Typically, the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 848
message . Probable Cause Indicates that the Fabric OS cannot examine the zone configuration file. Typically, the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 849
read the merged zone configuration file. Typically, the zone configuration is too large for the memory available on the switch. Recommended Reduce the >,, INFO, , The Default Zone access mode is set to No Access. Probable Cause Indicates that the Default Zone access mode is set to No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 850
, The Default Zone access mode is already set to No Access. Probable Cause Indicates that the Default Zone access mode is Brocade switch is running a lower version of Fabric OS that does not support the defined database. Recommended Upgrade all the switches to the same firmware version - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 851
zoning mode is not set to No Access, execute the defzone --noaccess command and then execute the cfgsave command to commit the default zone mode change. Severity ERROR ZONE-1050 Message , [ZONE-1050], ,, INFO, , The Interop Safe Zoning mode is set to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 852
mode will not grant all access behavior when the frame redirection zones are defined. Recommended Remove frame redirection zones or set the Default Zone access mode to No Access using the Action defzone --noaccess command. Severity WARNING ZONE-1055 Message , [ZONE-1055], - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 853
when Enhanced/Overlapping TI zones (ETIZs) are configured. Recommended Remove Fabric OS switch earlier than v6.4.0 from the fabric or delete switch with version pre6.4.0> running pre FOS6.4.0 firmware. TI member (Domain , Index ) is not supported - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 854
unroutable condition or unexpected routing behavior. Recommended Execute the zone --showTIerrors command on the specified switch to report the conflicting Action configuration details. Severity WARNING ZONE-1060 Message , [ZONE-1060], ,, WARNING, , Non - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 855
Audit Log Messages Section II This section provides the Audit messages, including: •AUDIT AG System Messages 771 •AUDIT AN System Messages 773 •AUDIT AUTH System Messages 777 •AUDIT BLS System Messages 781 •AUDIT CCFG System Messages 783 •AUDIT CNM System Messages 785 •AUDIT CONF System - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 856
770 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 857
N_Port mapping has been updated for N_Port (). Probable Cause Indicates that the F_Ports mapped to an N_Port have changed and the configuration file has been updated. Recommended No action is required. Action Severity INFO AG-1034 Message AUDIT, , [AG-1034 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 858
port> is connected to a Non-Brocade fabric with Persistent ALPA enabled. Check the admin guide for supported configuration . Probable Cause Indicates that one Recommended Action If the switchshow command on the connected fabric switch port displays "Persistently disabled: Area has been acquired", - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 859
for the source of the latency. If the port is a Action long-distance E_Port, ensure that there are enough buffer credits to service the link distance. Severity WARNING AN-1004 Message AUDIT, , [AN-1004], WARNING, FABRIC, , - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 860
detection configuration is successfully changed. Probable Cause Indicates that the bottleneck detection configuration was changed by a user. at the edge of the fabric. Recommended Contact your vendor's customer support for assistance. Action Severity WARNING AN-1011 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 861
event-location>, , Credits did not return from other end. Complete loss of credits on a VC on slot , please contact your vendor's customer Action support for assistance. Severity WARNING AN-1013 Message -details>, , , Performed link reset to recover the port credits on slot - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 862
117 AN-1013 776 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 863
not installed in this switch. Recommended Action Check the certificate availability using the pkiShow command. Install the automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1046 Message AUDIT, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 864
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-3001 Message AUDIT Old value>] to []. Probable Cause Indicates that an authentication configuration value was set to a specified value. The data type can be - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 865
. Recommended Action If the light on the specified port is off, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch using the portEnable command. If the E_Port formed no action is required. Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 866
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO AUTH-3008 Message AUDIT, , [AUTH-3008], INFO, SECURITY, , - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 867
was added. Probable Cause Indicates that an Internet Protocol Security (IPSec) or Internet Key Exchange (IKE) policy was added and the configuration file has been updated. Recommended No action is required. Action Severity INFO BLS-1003 Message AUDIT, , [BLS-1003 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 868
119 BLS-1003 782 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 869
1003], INFO, CFG, , , , System is ready to accept CEE user commands. Probable Cause Indicates that the CEE shell is ready to accept configuration commands. Recommended No action is required. Action Severity INFO CCFG-1013 Message AUDIT - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 870
120 CCFG-1013 784 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 871
, [CNM-3002], INFO, SECURITY, , , , Event: cryptocfg Status: success, Info: encryption group deleted. Probable Cause Indicates an encryption group was deleted. Recommended No action is required. Action Severity INFO CNM-3003 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 872
, , , Event: cryptocfg Status: success, Info: Membernode \\ left encryption group. Probable Cause Indicates the membernode left an encryption group. Recommended No action is required. Action Severity INFO CNM-3006 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 873
>, , Event: cryptocfg Status: success, Info: Routing mode of EE in slot set to . Probable Cause Indicates that the Encryption Engine (EE) routing mode was set. Recommended No action is required. Action Severity INFO CNM-3009 Message AUDIT, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 874
>, [CNM-3011], INFO, SECURITY, , , , Event: cryptocfg Status: success, Info: Encryption group synchronized. Probable Cause Indicates an encryption group was synchronized. Recommended No action is required. Action Severity INFO CNM-3012 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 875
[CONF-1022], WARNING, CFG, , , , Downloading configuration without disabling the switch was unsuccessful. Probable Cause Indicates an attempt to download the configuration without disabling the switch was unsuccessful because there are one or more parameters - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 876
Message , [CONF-1043], INFO, CFG, , , , Fabric Configuration Parameter changed to . Probable Cause Indicates that the fabric configuration parameter value has been changed. Recommended No action is required. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 877
AUDIT CVLM System Messages Chapter 123 CVLM-3001 Message AUDIT, , [CVLM-3001], INFO, SECURITY, , , , Event: cryptocfg Status: success, Info: Failback mode set to . Probable Cause Indicates that the failback mode - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 878
123 CVLM-3004 CVLM-3004 Message AUDIT, , [CVLM-3004], INFO, SECURITY, , , , Event: cryptocfg Status: success, Info: Cluster member added to HA cluster . Probable Cause Indicates a HA cluster member was added to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 879
failback from EE / to EE /. Probable Cause Indicates a manual failback was performed to an encryption engine. Recommended No action is required. Action Severity INFO CVLM-3010 Message AUDIT, , [CVLM-3010], INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 880
123 CVLM-3011 CVLM-3011 Message AUDIT, , [CVLM-3011], INFO, SECURITY, , , , Event: cryptocfg Status: success, Info: Initiator PWWN \\ Initiator NWWN \\ added to crypto target container \< - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 881
123 CVLM-3015 Recommended No action is required. Action Severity INFO CVLM-3015 Message AUDIT, , [CVLM-3015], INFO, SECURITY, , , , Event: cryptocfg Status: success, Info: Lun , attached through Initiator \< - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 882
Sequence Number> AUDIT, , [CVLM-3020], INFO, SECURITY, , , , Event: cryptocfg Status: success, Info: Manual rekey of LUN attached through Initiator \\ in crypto tgt container \\. Probable Cause Indicates - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 883
123 CVLM-3022 Recommended No action is required. Action Severity INFO CVLM-3022 Message AUDIT, , [CVLM-3022], INFO, SECURITY, , , , Event: cryptocfg Status: success, Info: Resume rekey of LUN attached through - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 884
123 CVLM-3025 CVLM-3025 Message AUDIT, , [CVLM-3025], INFO, SECURITY, , , , Event: cryptocfg Status: started, Info: Decommission of device (container initiator , LUN ). Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 885
Recommended No action is required. Action Severity INFO 123 CVLM-3028 Fabric OS Message Reference 799 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 886
123 CVLM-3028 800 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 887
Recommended Select an appropriate fabric name and set it again from any switch. Action Severity WARNING ESS-1010 Message AUDIT, - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 888
124 ESS-1010 802 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 889
AUDIT FCIP System Messages Chapter 125 FCIP-1002 Message AUDIT, , [FCIP-1002], INFO, CFG, , , , An IPsec/IKE policy was added. Probable Cause Indicates that an IPsec/IKE policy was added and the config file was updated. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 890
125 FCIP-1003 804 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 891
disabled. Recommended No action is required. Action Severity INFO FICU-1019 Message AUDIT, , [FICU-1019], INFO, CFG, , , , Switch has been set offline by LP(). Probable Cause Indicates that FMS has disabled the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 892
126 FICU-1020 FICU-1020 Message AUDIT, , [FICU-1020], INFO, CFG, , , , Port Addrs () have been Blocked by . Probable Cause Indicates that FMS has blocked the specified ports. Recommended No action is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 893
IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended Remove some unwanted files - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 894
127 FW-1404 FW-1404 Message AUDIT, , [FW-1404], WARNING, FW, , , , ,is above high boundaries(High=, Low=). Current value is . Probable Cause Indicates that the CPU or memory usage is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 895
Recommended No action is required. Action Severity INFO FW-3001 127 Fabric OS Message Reference 809 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 896
127 FW-3001 810 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 897
AUDIT, , [HTTP-1002], INFO, ZONE, , , , Zoning transaction initiated by User: , Role: completed successfully. Probable Cause Indicates that the zoning database has been changed. Recommended Verify that the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 898
128 HTTP-1003 812 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 899
[IPAD-1002], INFO, CFG, , , , Switchname has been successfully changed to . Probable Cause Indicates that a change with the switch name has occured. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 813 53 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 900
129 IPAD-1002 814 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 901
-initiator-details>, , , Duplicate Fabric Name matching with FID . Probable Cause Indicates that the configured fabric name is already used for another partition. Recommended Select a different fabric name and reconfigure. Action Severity ERROR Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 902
130 MS-1029 816 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 903
Number> AUDIT, , [PMGR-1001], INFO, LS, , , , Attempt to create switch succeeded. Probable Cause Indicates that the switch with the specified FID was successfully created. Recommended No action is required. Action Severity INFO PMGR-1003 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 904
131 PMGR-1003 818 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 905
changed for port (ID: ) in No_Module or No_Light state. Probable Cause Indicates the configuration changes were made to an offline port in No_Module or No_Light state. Recommended No action is required. Action Severity INFO PORT-1007 Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 906
132 PORT-1009 PORT-1009 Message AUDIT, , [PORT-1009], INFO, CFG, , , , GigE Port (ID: ) has been disabled. Probable Cause Indicates a GigE port has been disabled. Recommended No action is required. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 907
RAS-2003], INFO, SYSTEM, , ,, Audit message class configuration has been changed to . Probable Cause Indicates that the audit event class configuration has been changed. Recommended No action is required. Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 908
133 RAS-2003 822 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 909
AUDIT SEC System Messages Chapter 134 SEC-1113 Message AUDIT, , [SEC-1113], WARNING, SECURITY, , , , [ license ] going to expire in days. Probable Cause Indicates the license period will expire - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 910
be one of the following: • There has been an fabric configurations server (FCS) failover. • A security policy has been activated. • A security policy has been saved. • A security policy has been aborted. • A non-FCS password has changed. Recommended Action Verify the security event was planned. If - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 911
details>, , , Event: , Status: success, Info: Removed member(s) from policy . Probable Cause Indicates a user has removed the specific members from the specified security policy. If you use a wildcard (for example, an asterisk) in removing - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 912
success, Info: FCS member moved from position to . Probable Cause Indicates the fabric configuration server (FCS) list has Status: success, Info: Reset [] statistics on domain(s) []. Indicates that a user has reset a security statistic on - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 913
server for AAA services. Probable Cause Indicates a user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify the RADIUS configuration was changed intentionally. If the RADIUS configuration was intentionally changed, no action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 914
Info: . Probable Cause Indicates a user has changed the remote authentication dial-in user service (RADIUS or LDAP) configuration. Recommended Action Verify the RADIUS configuration was intentionally changed. If the RADIUS configuration was intentionally changed, no action is - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 915
: Passwdcfg parameters set to default values. Probable Cause Indicates the passwdCfg parameters are set to default values. Recommended Action Verify the attempt via . Probable Cause Indicates a successful login occurred. An IP address is displayed when the login - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 916
IP administrator Action may manually unlock the account. Severity INFO SEC-3024 Message Probable Cause AUDIT, , [SEC-3024], INFO, SECURITY, , , , Event: , Status: success, Info: User account [], password - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 917
[SEC-3025], INFO, SECURITY, , , , Event: , Status: success, Info: User account [] added. Role: [], Password [], Home Context [], AD/VF list []. Probable Cause Indicates - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 918
-3028], INFO, SECURITY, , , , Event: , Status: success, Info: User account [] deleted. Probable Cause Indicates the specified user account was deleted. Recommended Action Verify the security event was planned. If the security event - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 919
-location>, , Event: , Status: success, Info: Switch is configured to database. Probable Cause Indicates , Status: success, Info: Fabric wide configuration set to . Probable Cause Indicates the specified event has - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 920
SEC-3035], INFO, SECURITY, , , , Event: ipfilter, Status: success, Info: IP filter policy(ies) saved. Probable Cause Indicates the specified IP filter policies have been saved. Recommended Action Verify the security event was planned. If - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 921
. Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the specified protocol connection. Take Action appropriate action as defined - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 922
Verify the user has the required permission to execute this command. Action Severity INFO SEC-3048 Message AUDIT, , [SEC-3048], INFO, SECURITY, , , FIPS mode has been enabled in the system using force option. Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 923
SEC-3050 134 Recommended No action is required. Action Severity INFO SEC-3050 Message AUDIT, , [SEC-3050], INFO, SECURITY, Event: , Status: success, Info: . Probable Cause Indicates the specified sshutil operation was performed.. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 924
Number> AUDIT, , [SEC-3065], INFO, SECURITY, , , , Configuration of user-defined roles is uploaded. Probable Cause Indicates the configuration of user-defined roles have been uploaded. Recommended No action is required. Action Severity INFO 838 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 925
, Configuration of user-defined roles is downloaded. Probable Cause Indicates the configuration of user-defined roles have been downloaded. -initiator-details>, , , Client logged in , , . Probable Cause Indicates the client has logged - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 926
134 SEC-4001 840 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 927
-1006], INFO, CFG, , , , configuration was reset to default. Probable Cause Indicates that the specified SNMP configuration group was reset to the factory default. Recommended Execute the snmpConfig --show command for the group to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 928
135 SNMP-1009 SNMP-1009 Message AUDIT, , [SNMP-1009], INFO, CFG, , , , Port traps are on port . Probable Cause Indicates the blocked or unblocked status of the port traps on the specified port. - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 929
event-initiator-details>, ,, Event: cryptocfg Status: success, Info: EE in slot initialized. Probable Cause Indicates an encryption engine was initialized. Recommended No action is required. Action Severity INFO SPM-3003 Message AUDIT, , [SPM - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 930
, , , Event: cryptocfg Status: success, Info: EE in slot enabled. Probable Cause Indicates an encryption engine was enabled. Recommended No action is required. Action Severity INFO SPM-3005 Message AUDIT, , [SPM-3005 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 931
Event: cryptocfg Status: success, Info: DH challenge generated for vault IP . Probable Cause Indicates a DH challenge was generated for a : EE in slot zeroized. Probable Cause Indicates an encryption engine was zeroized. Recommended No action is required. Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 932
-location>, , Event: cryptocfg Status: success, Info: key vault registered. Certificate label: \"\" Certificate file: \"\" IP address: . Probable Cause Indicates a key vault was registered. Recommended No action is required. Action Severity - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 933
SPM-3015 136 Recommended No action is required. Action Severity INFO SPM-3015 Message AUDIT, , [SPM-3015], INFO, SECURITY, , , , Event: cryptocfg Status: success, Info: Key vault type set to . Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 934
136 SPM-3018 SPM-3018 Message AUDIT, , [SPM-3018], INFO, SECURITY, , ,, Event: cryptocfg Status: success, Info: master key recovered. Probable Cause Indicates a master key was recovered. Recommended No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 935
SPM-3022 136 Recommended No action is required. Action Severity INFO SPM-3022 Message AUDIT, , [SPM-3022], INFO, SECURITY, , ,,Event: cryptocfg Status: success, Info: Authentication card with certificate label \"\" - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 936
event-initiator-details>, , , Event: cryptocfg Status: success, Info: Recovery card registered. Certificate label: \"\" Certificate file: \"\". Probable Cause Indicates a recovery card was registered. Recommended No action is required. Action Severity INFO - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 937
SPM-3029 136 Recommended No action is required. Action Severity INFO SPM-3029 Message AUDIT, , [SPM-3029], INFO, , , , Event: KeyVault Connection Status: , Info:KAC_Connect: . Probable Cause Indicates the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 938
136 SPM-3029 852 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 939
Do not fail over or power down the system during firmware upgrade. Run the firmwareDownloadStatus has completed successfully and switch firmware has been updated. Recommended firmware versions. Severity INFO SULB-1003 Message AUDIT, , [SULB-1003], INFO, FIRMWARE - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 940
on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby CP - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 941
and status codes (Continued) Status message "firmwareCommit operation failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "Unable to restore the original firmware due to Standby CP timeout." "Standby CP failed to reboot and was not responding." "Unable to - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 942
started to restore the secondary partition." 0x93 "firmwareCommit failed." 0x94 "The secondary partition has been restored successfully." 0x95 "Firmware is being downloaded to the blade. This step may take up to 10 minutes." 0xa0 "firmwareDownload timed out." 0xa1 "Reboot occurred during - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 943
. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 944
your service provider for recovery." 0x28 "The pre-install script failed." 0x29 "The platform option is not supported. Run chassisConfig to reset the option first and then try 0x2a firmwareDownload." "Failed to install RPM package." 0x2b "Cannot downgrade directly to this version. Downgrade - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 945
file server. It may also be caused by temporary networking issues. Please reload firmware packages on the file server, then retry firmwareDownload. If the problem persists, contact your system administrator. Table 12 lists the firmwareDownload state names and state values. They indicate where in the - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 946
firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting . If the problem persists, contact your switch service provider. Severity ERROR - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 947
trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message AUDIT, , [SULB-1021], WARNING, FIRMWARE, , , , Firmware is being downloaded to the blade in slot - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 948
If at the end of firmwareCommit, the blade firmware version is still inconsistent with the active CP firmware, firmwareDownload will automatically be restarted on the blade. Run the firmwareDownloadStatus command to monitor the progress. If the problem persists, contact your switch service provider - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 949
progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , [SULB-1031], WARNING, FIRMWARE, , , , The switch is relocating an internal firmware image. Probable Cause - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 950
the internal image to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1037 Message AUDIT, , [SULB-1037], ERROR, FIRMWARE, HCL failed. Reboot the switch manually using the reboot command. However, it will - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 951
Run the firmwareShow command to verify the firmware versions. Run the firmwareDownload command again if the firmware is not updated. This will cause the internal image to be relocated again. If the problem persists, contact your switch service provider. Severity WARNING Fabric OS Message Reference - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 952
the firmwareActivate command has completed successfully and switch firmware has been updated. Recommended Action No action is required. The firmwareActivate command has completed as expected. Run the firmwareShow command to verify the firmware versions. Severity INFO 866 Fabric OS Message - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 953
AUDIT SWCH System Messages Chapter 138 SWCH-1012 Message AUDIT, , [SWCH-1012], INFO, CFG, , , , Trunk Area () has been enabled for one or more ports. Probable Cause Indicates that a Trunk Area has been enabled for - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 954
138 SWCH-1014 868 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 955
AUDIT, , [UCST-1022], INFO, CFG, , , , In-order delivery option has been disabled. Probable Cause Indicates the IOD option has been disabled for the switch. This may cause out-of-order delivery of frames. Recommended No action is required. Action - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 956
-1025], INFO, CFG, , , , In-order delivery option has been enabled with Lossless-DLS option. Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery of frames during topology changes. Recommended No - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 957
Recommended No action is required. Action Severity INFO 139 UCST-1027 Fabric OS Message Reference 871 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 958
139 UCST-1027 872 Fabric OS Message Reference 53-1002448-01 - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 959
have been added to the specified zone object set. The zone object type variable can be alias, zone member, zone or zone configuration. The string "..." appears at the end of the zone object member list variable if the list was truncated in the message. Recommended Verify that the event was planned - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 960
been removed from the specified zone object set. The zone object type variable can be alias, zone member, zone or zone configuration. The string "..." appears at the end of the zone object member list variable if the list was truncated in the message. Recommended Verify that the event was planned - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 961
, , , Event: , Status: success, Info: Zone configuration \"\" enabled. . Probable Cause Indicates that the specified zone configuration has been enabled. Recommended Verify that the event was planned. If the event was - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 962
140 ZONE-3011 Recommended Verify that the event was planned. If the event was planned, no action is required. If the event was Action not planned, take appropriate action as defined by your enterprise security policy. Severity INFO ZONE-3011 Message AUDIT, , [ZONE- - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 963
an AD alias or AD member. The string "..." appears at the end of the AD object member list variable if the list was truncated in cleared. Probable Cause Indicates that all AD definitions and all zone configurations under them have been cleared. Recommended Verify that the event was planned - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 964
the specified AD has been created. The AD object set type variable can be an AD alias or AD member. The string "..." appears at the end of the AD object member list variable if the list was truncated in the message. Recommended Verify that the event was planned. If the event - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 965
], INFO, FABRIC, , , , Event: , Status: success, Info: Current AD configuration saved to flash. Probable Cause Indicates that the current AD configuration has been saved to flash. Recommended Verify that the event was planned. If the event was - HP Brocade 8/12c | Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 966
140 ZONE-3024 ZONE-3024 Message AUDIT, , [ZONE-3024], INFO, FABRIC, , , , Command: , Status: success, Info: executed. . Probable Cause Indicates that the ad --transabort command has completed successfully
53-1002448-01
15 December 2011
®
Fabric OS
Message Reference
Supporting Fabric OS v7.0.1