HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 355

FCR-1064 37 FCR-1064 Message , [FCR-1064], ,, ERROR, , Fabric ID of backbone FC-Routers mismatch or overlap. Probable Cause Indicates that either (1) a backbone fabric split and both are connected to common edge fabrics, or (2) the fabric IDs of two backbone fabrics connected to an edge fabric are the same. Recommended Action If the backbone fabric split, merge the fabrics. If two (or more) backbone fabrics have the same IDs, make the fabric IDs unique using fcrConfigure command. Severity ERROR FCR-1065 Message , [FCR-1065], ,, ERROR, , Fabric on port was assigned two different fabric IDs. Probable Cause Indicates that another port on the switch is connected to the same edge fabric with a different fabric ID assignment. Recommended Change the port fabric ID to same value as the other ports connected to the edge fabric using the Action portCfgExport or portCfgVexport commands. Severity ERROR FCR-1066 Message , [FCR-1066], ,, ERROR, , Fabric on port has the same fabric ID as another fabric. Probable Cause Indicates that either the fabric split, or there is another fabric (possibly the backbone) that has the same fabric ID as the fabric connected to the specified port. Recommended Action If the fabric split, then merge the fabrics and manually re-enable the port. If there is another fabric with the same ID, change the fabric ID for the port using the portCfgExport or portCfgVExport commands. Severity ERROR FCR-1067 Message Probable Cause , [FCR-1067], ,, WARNING, , Zone configurations, total LSAN zones and aliases, exceeded on port by entries; max entries: . Indicates that the total number of zone configurations created in the connected fabric exceeds the maximum number supported by the Fibre Channel. Fabric OS Message Reference 269 53-1002448-01