HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 187

C2-1017 11 Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity ERROR C2-1017 Message Message , [C2-1017], ,, ERROR, , Blade in Slot failed due to unavailability of ports in the internal trunk. Probable Cause Indicates that the blade failed due to unavailability of the ports in the internal trunk. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity ERROR C2-1018 Message Message , [C2-1018], ,, ERROR, , Blade in Slot faulted due to Link reset threshold value exceeded. Probable Cause Indicates that blade is faulted due to Link reset threshold exceeded. Recommended Whenever this error is observed persistently, power cycle the specified blade. If the problem Action persists, replace the blade. Severity ERROR C2-1019 Message Message , [C2-1019], ,, WARNING, , S,C: HW ASIC Chip TXQ FID parity error threshold reached type = 0x. Probable Cause Indicates that an internal error is observed in the ASIC hardware that may degrade the data traffic. Recommended Whenever this error occurs, restart the system at the next maintenance window. Action Severity WARNING Fabric OS Message Reference 101 53-1002448-01