HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 509

HAM-1007 46 Recommended The standby CP will take over and reset the active CP. The system will be non-redundant because Action the standby CP becomes the active CP. Severity CRITICAL HAM-1007 Message , [HAM-1007], , SLOT cp-slpt-number | FFDC | CHASSIS, FFDC, CRITICAL, , Need to reboot the system for recovery, reason: . Probable Cause Indicates that the switch in current condition needs to be restarted to achieve a reliable recovery. The reasons can be one of the following: • The standby CP was not ready when failover occurred. • The failover occurred when the last Logical switch (LS) transaction was incomplete. • The switch failed when timeout occurred at certain stage. • The cold or warm recovery has failed. Recommended If auto-reboot is enabled, the switch will automatically restart. Otherwise, execute the reboot Action command to manually restart the switch. Severity CRITICAL HAM-1008 Message , [HAM-1008], , SLOT cp-slpt-number | FFDC | CHASSIS, FFDC, CRITICAL, , Rebooting the system for recovery - auto-reboot is enabled. Probable Cause Indicates that the recovery by auto-reboot is enabled, and therefore the switch automatically restarts. This message is displayed if the event logged in HAM-1007 has occurred and auto-reboot is enabled. Recommended Wait until the switch is up to perform any operations. Action Severity CRITICAL HAM-1009 Message Probable Cause , [HAM-1009], , SLOT cp-slpt-number | FFDC | CHASSIS, FFDC, CRITICAL, , Need to MANUALLY REBOOT the system for recovery auto-reboot is disabled. Indicates that the recovery by auto-restart is disabled, therefore the switch needs to be manually restarted for recovery. This message is displayed if the event logged in HAM-1007 has occurred and auto-reboot is disabled. Fabric OS Message Reference 423 53-1002448-01