HP Brocade 8/12c Brocade Fabric OS Message Reference - Supporting Fabric OS v7 - Page 852

115 ZONE-1052 ZONE-1052 Message , [ZONE-1052], ,, INFO, , The Interop Default Zone state is set to enabled. Probable Cause Indicates that the Interop Default Zone attribute state is enabled. Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not Action planned, take appropriate action as defined by your enterprise security policy. Severity INFO ZONE-1053 Message , [ZONE-1053], ,, INFO, , The Default Zone state is set to Disabled. Probable Cause Indicates that the Interop Default Zone attribute state is disabled. Recommended Verify the event was planned. If the event was planned, no action is required. If the event was not Action planned, take appropriate action as defined by your enterprise security policy. Severity INFO ZONE-1054 Message , [ZONE-1054], ,, WARNING, , Default Zone All Access mode is set with Frame Redirection zones. Probable Cause Indicates that the Default Zone All Access mode will not grant all access behavior when the frame redirection zones are defined. Recommended Remove frame redirection zones or set the Default Zone access mode to No Access using the Action defzone --noaccess command. Severity WARNING ZONE-1055 Message , [ZONE-1055], ,, WARNING, , McDATA default zone enabled with Frame Redirection zones. Probable Cause Indicates that frame redirection will not function properly with McDATA default zoning. Recommended Remove frame redirection zones or disable McDATA default zoning. Action Severity WARNING 766 Fabric OS Message Reference 53-1002448-01