HP Brocade 8/12c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 212

22 cryptoCfg node_WWN Specifies the WWN of the switch or chassis to which the encryption engine belongs. This operand is optional; if omitted, only the HA cluster name is defined. You may add EEs separately with the --add -haclustermember command. slot Specifies the encryption engine slot number on bladed systems. --delete -hacluster Deletes the HA cluster with the specified name. This command is valid only on the group leader. The following operand is required: HA_cluster_name Specifies the name of the HA cluster to be deleted. --add -haclustermember Adds one or more encryption engine members to an already configured HA. A maximum of two HA cluster members is currently supported. The EEs must be part of the same encryption group as the node on which this command is issued. This command is valid only on the group leader. The encryption engines must belong to different switches or chassis. This rule is enforced by the CLI to ensure redundancy. The following operands are required with the --add command: node_WWN Specifies the node WWN of the switch or chassis to which the encryption engine belongs. slot Specifies the encryption engine slot number on bladed systems. --remove -haclustermember Removes one or both encryption engine members from an already configured HA cluster. This command is valid only on the group leader. This command only removes the failover/failback capability for the removed EEs; it does not affect the relationship between configured CryptoTarget containers and the encryption engine that is removed from the HA cluster. The containers still belong to this encryption engine and encryption operations continue. The following operands are required with the --remove command: node_WWN Specifies the WWN of the switch or chassis to which the encryption engine belongs. slot Specifies the encryption engine slot number on bladed systems. --replace -haclustermember Replaces an encryption engine, either failed or alive, with an alternate encryption engine. All target associations for the current encryption engine are transferred over to the alternate encryption engine when this command is executed. The alternate encryption engine does not have to be part of the current HA cluster. Upon successful replacement, the alternate encryption engine automatically becomes part of the configured HA cluster and disrupted peer relationships are repaired. This command is only valid on the group leader. The following operands are supported with the --replace command: HA_cluster_name Specifies the HA cluster member to be replaced. The HA cluster name must be specified when this operand is used. This operand is optional. It is not needed if the encryption engine to be replaced is not part of an HA cluster. 178 Fabric OS Command Reference 53-1001764-01