HP Brocade 8/12c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 860

22 portStatsShow NOTES OPERANDS ge_stat_rx_octets The number of octets received on the GbE port. ge_stat_rx_ucast_frms The number of unicast frames received on the GbE port. ge_stat_rx_mcast_frms The number of multicast frames received on the GbE port. ge_stat_rx_bcast_frms The number of broadcast frames received on the GbE port. ge_stat_rx_vlan_frms The number of VLAN frames received on the GbE port. ge_stat_rx_pause_frms The number of pause frames received on the GbE port. ge_err_carrier The number of times the GbE port lost carrier sense. ge_err_length The number of times an invalid length error was observed on the GbE port. ge_err_crc The number of CRC Errors received on the GbE port. ge_err_abort The number of frames aborted on the GbE port. ge_err_overrun The number of overruns observed on the GbE port. ge_err_fifo_ovf The number of times an overflow of the first in first out (FIFO) queue was observed on the GbE port. ip_err_hdr_cksum The number of checksum errors observed on the GbE port. ip_err_tcp_data_chksum The number of IP TCP data checksum errors observed on the GbE port. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command is not supported on FCoE ports. This command has the following operands: slot For bladed systems only, specifies the slot number of the port to be displayed, followed by a slash (/). [ge]port Displays statistics for a single port identified by the port number, relative to its slot on bladed systems. Specify the optional ge option to display the GbE port hardware statistics. Port ranges are not supported with this command. Use switchShow for a listing of valid ports. -i index1[-index2] Displays statistics for a single port or for a range of ports identified by port index numbers. You may specify multiple index ranges separated by a space, for example, -i 33-47 65-73. 826 Fabric OS Command Reference 53-1001764-01