HP CM6030 HP Color LaserJet CM6030/CM6040 MFP Series - Software Technical Refe - Page 220

Accessory Output Bin This control specifies whether you have any accessory output devices installed on your product. The following are available accessory output devices: ● HP 3-bin Stapler/Stacker - Mailbox Mode ● HP 3-bin Stapler/Stacker - Function Separator Mode ● HP 3-bin Stapler/Stacker - Stacker Mode ● HP Booklet Maker - Mailbox Mode ● HP Booklet Maker - Stacker Mode Printer Memory This control has the following settings: ● 768 MB ● 896 MB ● 1024 MB Printer Hard Disk When this option is enabled, the Job Storage option and the Mopier Mode are enabled in the print driver. Use the Job Storage option to store print jobs and then print them later from the control panel. The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. NOTE: This option is always installed. Job Storage When Job Storage is enabled, the product can store print jobs so that you can gain access to those print jobs later at the control panel. Job Separator Use this control to specify whether a print job identifier page should be printed between print jobs. See Preferences, Finishing Tab for more information. Mopier Mode The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. Multiple-original printing (mopying) increases performance and reduces network traffic by transmitting the job to the product once and then storing it in memory or on the hard disk. The remainder of the copies are printed at the fastest speed. All documents that are printed in mopier mode can be created, controlled, managed, and finished from the computer, which eliminates the extra step of using a photocopier. The HP Color LaserJet CM6030 and CM6040 MFP Series supports the transmit-once mopying feature when the Mopier Mode: setting on the Device Settings tab is Enabled. 200 Chapter 4 HP PCL 6 Print Driver for Windows ENWW