HP Chromebook x360 11 G4 Education Edition Maintenance and Service Guide - Page 40

sink and system board spare part kits. The following illustration shows the replacement thermal

Get HP Chromebook x360 11 G4 Education Edition PDF manuals and user guides View all HP Chromebook x360 11 G4 Education Edition manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Before removing the heat sink, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 23). 2. Remove the bottom cover (see Bottom cover on page 23). 3. Disconnect the battery cable from the system board (see Battery on page 24). Remove the heat sink: 1. Remove the two Phillips M2.0 × 2.0 screws (1), and then remove the heat sink from the computer (2). 2. Thoroughly clean the thermal material from the surfaces of the heat sink and the system board components each time the heat sink is removed. Replacement thermal material is included with the heat sink and system board spare part kits. The following illustration shows the replacement thermal material locations. Thermal paste is used on the heat sink (1) and one system board component (2). 32 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
23
).
2.
Remove the bottom cover (see
Bottom cover
on page
23
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
24
).
Remove the heat sink:
1.
Remove the two Phillips M2.0 × 2.0 screws
(1)
, and then remove the heat sink from the computer
(2)
.
2.
Thoroughly clean the thermal material from the surfaces of the heat sink and the system board
components each time the heat sink is removed. Replacement thermal material is included with the heat
sink and system board spare part kits. The following illustration shows the replacement thermal
material locations.
Thermal paste is used on the heat sink
(1)
and one system board component
(2)
.
32
Chapter 5
Removal and replacement procedures for authorized service provider parts