HP Chromebook x360 11 G4 Education Edition Maintenance and Service Guide - Page 41

Pen (POGO) cable, System board, that secure the cable to the computer.

Get HP Chromebook x360 11 G4 Education Edition PDF manuals and user guides View all HP Chromebook x360 11 G4 Education Edition manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Reverse this procedure to install the heat sink. Pen (POGO) cable To remove the POGO cable, use this procedure and illustration. Table 5-9 POGO cable description and part number Description POGO cable Spare part number M47231-001 Before removing the POGO cable, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 23). 2. Remove the bottom cover (see Bottom cover on page 23). 3. Disconnect the battery cable from the system board (see Battery on page 24). Remove the POGO cable: 1. Lift the clear plastic tape from the top of the system board connector (1). 2. Disconnect the cable from the system board ZIF connector (2). 3. Remove the three Phillips M1.6 × 3.5 screws (3) that secure the cable to the computer. 4. Remove the POGO cable from the computer (4). Reverse this procedure to install the POGO cable. System board To remove the system board, use these procedures and illustrations. Component replacement procedures 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Reverse this procedure to install the heat sink.
Pen (POGO) cable
To remove the POGO cable, use this procedure and illustration.
Table 5-9
POGO cable description and part number
Description
Spare part number
POGO cable
M47231-001
Before removing the POGO cable, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
23
).
2.
Remove the bottom cover (see
Bottom cover
on page
23
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
24
).
Remove the POGO cable:
1.
Lift the clear plastic tape from the top of the system board connector
(1)
.
2.
Disconnect the cable from the system board ZIF connector
(2)
.
3.
Remove the three Phillips M1.6 × 3.5 screws
(3)
that secure the cable to the computer.
4.
Remove the POGO cable from the computer
(4)
.
Reverse this procedure to install the POGO cable.
System board
To remove the system board, use these procedures and illustrations.
Component replacement procedures
33