HP Cisco MDS 9120 Cisco MDS 9500 Series Hardware Installation Guide (OL-17467- - Page 93
Attaching the Crossbar to the Side Rack-Mount Brackets Rear View
View all HP Cisco MDS 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 2 Installing the Cisco MDS 9500 Series Installing the Chassis in a Cabinet or Rack Send documentation comments to [email protected]. Figure 2-5 Installing the Side Rack-Mount Brackets for the Cisco MDS 9509 Chassis 1 2 1 94997 1 Side rack-mount bracket 2 Screws, 12-24 or 10-32 Step 3 Attach the crossbar to the back of the side rack-mount brackets using one M3 x 8-mm screw per side as shown in Figure 2-6. Figure 2-6 Attaching the Crossbar to the Side Rack-Mount Brackets (Rear View) Front of rack 2 1 94995 4 3 3 1 Side rack-mount bracket 2 Side rack-mount bracket 3 Screws, M3 4 Crossbar Step 4 Position a person at each side of the chassis. Grasp the chassis handle with one hand and use the other hand near the back of the chassis for balance. Slowly lift the chassis in unison, avoiding sudden twists or moves to prevent injury. Place the rear of the chassis on the side rack-mount brackets between the front mounting rails, and slide it until it rests on the crossbar and the side rack-mount brackets (see Figure 2-7). OL-17467-02 Cisco MDS 9500 Series Hardware Installation Guide 2-13