HP Cisco MDS 9124 Cisco MDS 9100 Series Hardware Installation Guide (OL-17951- - Page 38

Sliding the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch onto the Notched, Slider

Get HP Cisco MDS 9124 - Fabric Switch PDF manuals and user guides View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Installing the Switch in a Cabinet or Rack Chapter 2 Installing the Cisco MDS 9100 Series Send documentation comments to [email protected] Figure 2-5 Sliding the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch onto the Notched Slider Rails 182460 Step 6 Stabilize the switch in the rack by attaching the front rack-mount brackets to the front rack-mounting rails: a. Insert two screws (12-24 or 10-32, depending on rack type) and through the cage nuts and the holes in one of the front rack-mount brackets and into the threaded holes in the rack-mounting rail (see Figure 2-6 or Figure 2-7). b. Repeat for the front rack-mount bracket on the other side of the switch. If you are installing the optional cable guides, place the cable guides in front of the front rack-mount brackets, and then pass the screws through the cable guides, front rack-mount brackets, and mounting rail. You can install one or both cable guides; if installing a single cable guide, it can be installed on either side. 2-10 Cisco MDS 9100 Series Hardware Installation Guide OL-17951-02

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Send documentation comments to [email protected]
2-10
Cisco MDS 9100 Series Hardware Installation Guide
OL-17951-02
Chapter 2
Installing the Cisco MDS 9100 Series
Installing the Switch in a Cabinet or Rack
Figure 2-5
Sliding the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch onto the Notched
Slider Rails
Step 6
Stabilize the switch in the rack by attaching the front rack-mount brackets to the front rack-mounting
rails:
a.
Insert two screws (12-24 or 10-32, depending on rack type) and through the cage nuts and the holes
in one of the front rack-mount brackets and into the threaded holes in the rack-mounting rail (see
Figure 2-6
or
Figure 2-7
).
b.
Repeat for the front rack-mount bracket on the other side of the switch.
If you are installing the optional cable guides, place the cable guides in front of the front rack-mount
brackets, and then pass the screws through the cable guides, front rack-mount brackets, and mounting
rail. You can install one or both cable guides; if installing a single cable guide, it can be installed on
either side.
182460