Home » HP Manuals » Storage Devices » HP Cisco MDS 9124 » Manual Viewer

HP Cisco MDS 9124 Cisco MDS 9100 Series Hardware Installation Guide (OL-17951- - Page 89

Environmental and Electrical Specifications for Cisco Fibre Channel SFP Transceivers

Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

Appendix B Technical Specifications SFP Transceiver Specifications Send documentation comments to [email protected] Environmental and Electrical Specifications for Cisco Fibre Channel SFP Transceivers Table B-11 provides the maximum environmental and electrical ratings for Cisco Fibre Channel SFP transceivers. Table B-11 Maximum Environmental and Electrical Ratings for Cisco Fibre Channel SFP Transceivers Parameter Symbol Min. Max. Unit Storage temperature1 TS -40 85 °C Case temperature1, 2 TC 0 70 °C Relative humidity1, RH 5 95 % Module supply voltage1, VCCT,R 3.1 3.5 V 1. Absolute maximum ratings are those values beyond which damage to the device may occur if these limits are exceeded for other than a short period of time. See Reliability Data Sheet for specific reliability performance. 2. Functional performance is not intended, device reliability is not implied, and damage to the device may occur over an extended period of time between absolute maximum ratings and the recommended operating conditions. Cisco Gigabit Ethernet/Fibre Channel Transceivers Table B-12 lists the combination Gigabit Ethernet/Fibre Channel (GE/FC) SFP transceivers available through Cisco Systems for the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch. Table B-12 Cisco Gigabit Ethernet / Fibre Channel SFP Transceivers Part Number DS-SFP-FCGE-SW DS-SFP-FCGE-LW DS-SFP-GE-T Description 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel-short wavelength SFP 1-Gbps Ethernet and 1-Gbps/2-Gbps Fibre Channel-long wavelength SFP 1-Gbps Ethernet SFP Type Short wavelength Long wavelength General Specifications for Cisco GE/FC SFP Transceivers Table B-13 lists general specifications for Cisco combination Gigabit Ethernet/Fibre Channel SFP transceivers. Note The cable distances provided are for 2-Gbps. OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide B-7

Section	Page
Cisco MDS 9100 Series Hardware Installation Guide	1
Contents	3
New and Changed Information	7
Preface	9
Audience	9
Organization	9
Document Conventions	10
Related Documentation	12
Release Notes	12
Compatibility Information	12
Regulatory Compliance and Safety Information	12
Hardware Installation	12
Cisco Fabric Manager	13
Command-Line Interface	13
Intelligent Storage Networking Services Configuration Guides	13
Troubleshooting and Reference	13
Installation and Configuration Note	13
Obtaining Documentation, Obtaining Support, and Security Guidelines	14
Product Overview	15
Cisco MDS 9100 Series Multilayer Fabric Switches	16
Cisco MDS 9134 Switch	17
Cisco MDS 9124 Switch	18
Cisco MDS 9140 Switch	18
Cisco MDS 9120 Switch	19
Cisco MDS Fibre Channel Bladeswitch for IBM BladeCenter	19
Power Supplies	20
Fan Modules	20
Cisco MDS 9100 Series Ports	21
Ports on the Cisco MDS 9134 Switch	21
Ports on the Cisco MDS 9124 Switch	23
Ports on the Cisco MDS 9140 Switch and the Cisco MDS 9120 Switch	23
Switch LEDs	24
Supported SFP Transceivers	27
Fibre Channel SFP Transceivers	27
Combination Fibre Channel/Gigabit Ethernet SFP Transceivers	28
CWDM Combination Fibre Channel/Gigabit Ethernet SFP Transceivers	28
Installing the Cisco MDS 9100 Series	29
Preinstallation	30
Installation Options	30
Installation Guidelines	31
Required Equipment	32
Unpacking and Inspecting the Switch	32
Installing the Switch in a Cabinet or Rack	33
Front-Facing Installation	34
Installing the Switch in a Cabinet with Insufficient Front Clearance	39
Installing Front Rack-Mount Brackets for Cabinets with 26 Inches or Greater of Rail Spacings	41
Installing Front Rack-Mount Brackets for Cabinets with Less Than 26 Inches of Rail Spacings	42
Installing Cisco MDS 9100 Series Switch Rear-Facing into Cabinet	43
Installing a Cisco MDS 9134 Switch or a Cisco MDS 9124 Switch Rear-Facing into Cabinet	45
Installing Cisco MDS 9134 48-Port and 64-Port Stackable Bundles	49
Grounding the Switch	51
Starting Up the Switch	52
Removing and Installing Components	54
Removing and Installing AC Power Supplies	56
Removing Power Supplies	56
Installing Power Supplies	57
Removing and Installing DC Power Supplies	58
Removing Power Supplies	58
Installing Power Supplies	59
Removing and Installing Fan Modules	60
Removing a Fan Module on the Cisco MDS 9140 Switch, the Cisco MDS 9120 Switch, and the Cisco MDS 9134 Switch	60
Installing a Fan Module	61
Verifying the Fan Module	62
Connecting the Cisco MDS 9100 Series	63
Preparing for Network Connections	63
Connecting the Console Port	63
Connecting the Console Port to a PC	64
Connecting a Modem to a Console Port	65
Connecting the 10/100 Ethernet Management Port	65
Connecting to a Fibre Channel Port	66
Removing and Installing SFP Transceivers	66
Installing an SFP Transceiver	67
Removing an SFP Transceiver	68
Removing and Installing Cables into SFP Transceivers	69
Installing a Cable into an SFP Transceiver	69
Removing a Cable from an SFP Transceiver	70
Maintaining SFP Transceivers and Fiber-Optic Cables	71
Cabinet and Rack Installation	73
Cabinet and Rack Requirements	73
General Requirements for Cabinets and Racks	73
Requirements Specific to Perforated Cabinets	74
Reference Perforated Cabinet	74
Requirements Specific to Solid-Walled Cabinets	75
Requirements Specific to Standard Open Racks	75
Requirements Specific to Telco Racks	75
Cisco MDS 9000 Family Telco and EIA Shelf Bracket	75
Rack-Mounting Guidelines	76
Before Installing the Shelf Brackets	77
Required Equipment	77
Installing the Shelf Bracket Kit into a Two-Post Telco Rack	77
Installing the Shelf Bracket Kit into a Four-Post EIA Rack	79
Installing the Switch on the Shelf Brackets	80
Removing the Shelf Bracket Kit (Optional)	81
Technical Specifications	83
Switch Specifications	83
Power Specifications	84
General Power Supply Specifications	85
Power Supply Requirements and Heat Dissipation Specifications	85
Connection Guidelines for AC-Powered Systems	87
SFP Transceiver Specifications	87
Cisco Fibre Channel SFP Transceivers	87
General Specifications for Cisco Fibre Channel SFP Transceivers	88
Environmental and Electrical Specifications for Cisco Fibre Channel SFP Transceivers	89
Cisco Gigabit Ethernet/Fibre Channel Transceivers	89
General Specifications for Cisco GE/FC SFP Transceivers	89
Environmental and Electrical Specifications for Cisco GE/FC SFP Transceivers	90
Cisco CWDM SFP Transceivers	90
General Specifications for Cisco CWDM SFP Transceivers	91
Environmental and Electrical Specifications for Cisco CWDM SFP Transceivers	91
Optical Specifications for Cisco CWDM SFP Transceivers	92
X2 Transceiver Specifications	93
Cable and Port Specifications	95
Cables and Adapters	95
Console Port	96
Console Port Pinouts	96
Connecting the Console Port to a Computer Using the DB-25 Adapter	96
Connecting the Console Port to a Computer Using the DB-9 Adapter	97
MGMT 10/100 Ethernet Port	97
Supported Power Cords and Plugs	98
Power Cords	98
Jumper Power Cord	99
Site Planning and Maintenance Records	101
Site Preparation Checklist	101
Contact and Site Information	103
Chassis and Network Information	104