HP Cisco MDS 9140 Cisco MDS 9500 Series Hardware Installation Guide (OL-17467- - Page 39
Supervisor-2 Modules
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 1 Product Overview Supervisor Modules Send documentation comments to [email protected]. Supervisor-2 Modules The Cisco MDS 9500 Series offers redundant, hot-swappable, Supervisor-2 modules. (See Figure 1-12.) Supervisor-2 modules can be used in the Cisco MDS 9509 and 9506 Directors in slots 5 and 6. Supervisor-2 modules must be used in slots 7 and 8 of the Cisco MDS 9513 Director. Supervisor-2 modules provide an integrated crossbar switching fabric to connect all the switching modules when used in a Cisco MDS 9509 or 9506 Director. Single fabric configurations provide 720-Gbps full duplex speed with 80-Gbps full duplex bandwidth per switching module. Dual fabric configurations provide 1.4-Tbps speed with 160-Gbps full duplex bandwidth per switching module. This integrated crossbar switching fabric is disabled when a Supervisor-2 module is installed in a Cisco MDS 9513 Director. The Cisco MDS 9513 Director supports two external crossbar modules located at the rear of the chassis that handle this function. (For more information, see the "Crossbar Modules" section on page 1-25.) Figure 1-12 Cisco MDS 9500 Series Supervisor-2 Module 3 4 5 78 9 144472 1 2 6 1 Status, System, Active, and Power 6 CompactFlash LED Management LEDs1 2 Reset button 3 Console port 7 CompactFlash eject button 8 CompactFlash slot 4 MGMT 10/100/1000 Ethernet port 9 USB ports (with integrated Link and Activity LEDs) 5 COM1 serial port 1. See Table 1-4 on page 1-20 for status LED descriptions. The main functions and components of the Supervisor-2 modules are as follows: • Control and Management • Processor • Port Interfaces • LEDs on the Supervisor-2 Module OL-17467-02 Cisco MDS 9500 Series Hardware Installation Guide 1-17