HP Cisco MDS 9140 Cisco MDS 9500 Series Hardware Installation Guide (OL-17467- - Page 46
Table 1-5, LEDs for the Cisco MDS 9500 Series Supervisor Modules, Ethernet Link
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Supervisor Modules Chapter 1 Product Overview Send documentation comments to [email protected]. Table 1-5 LEDs for the Cisco MDS 9500 Series Supervisor Modules LED Status Description Status Green All diagnostics pass. The module is operational (normal initialization sequence). Orange One of the following occurs: • The module is booting or running diagnostics (normal initialization sequence). • An over-temperature condition occurred (a minor threshold was exceeded during environmental monitoring). Red One of the following occurs: • The diagnostic test failed. The module is not operational because a fault occurred during the initialization sequence. System1 Green • An over-temperature condition occurred (a major threshold was exceeded during environmental monitoring). All chassis environmental monitors are reporting OK. Orange One of the following occurs: • The power supply failed or the power supply fan failed. • Incompatible power supplies are installed. • The redundant clock failed. Red The temperature of the supervisor module exceeded the major threshold. Active Green The supervisor module is operational and active. Pwr Mgmt1 Orange The supervisor module is in standby mode. Green Sufficient power is available for all modules. Orange Sufficient power is not available for all modules. MGMT 10/100 Green Ethernet Link Off LED Link is up. No link. MGMT 10/100 Green Ethernet Off Activity LED Traffic is flowing through port. No link or no traffic. CompactFlash Green The external CompactFlash card is being accessed. Off No activity. 1. The System and Pwr Mgmt LEDs on a redundant supervisor module are synchronized to the active supervisor module. 1-24 Cisco MDS 9500 Series Hardware Installation Guide OL-17467-02