HP Cisco MDS 9140 Cisco MDS 9500 Series Hardware Installation Guide (OL-17467- - Page 94
Installing the Cisco MDS 9509 Chassis in the Rack, Step 5
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Installing the Chassis in a Cabinet or Rack Chapter 2 Installing the Cisco MDS 9500 Series Send documentation comments to [email protected]. Figure 2-7 Installing the Cisco MDS 9509 Chassis in the Rack 90022 1 23 1 Crossbar 2 Mounting rail 3 Side rack-mount bracket Step 5 If you are installing the optional cable management bracket, place the cable management bracket in front of the front right rack-mount brackets. Align the holes in the cable management brackets with the holes in the front rack-mount brackets and mounting rails, and then insert the screws. Note Because the fan tray is on the left side of the chassis, Cisco recommends using only the right side for cable management. Using the right side for cable management allows easy removal of the fan tray if you need to replace a fan. Step 6 Align the holes in the front rack-mount bracket with the holes in the mounting rails and insert the 12-24 x 3/4-inch or 10-32 x 3/4-inch screws (see Figure 2-8), using six screws per side. Note Use a minimum of six screws per side to ensure that the switch is adequately supported. 2-14 Cisco MDS 9500 Series Hardware Installation Guide OL-17467-02