HP Cisco MDS 9216i Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1132

show dmm fp-port Chapter 22 Show Commands Send documentation comments to [email protected] show dmm fp-port To display front panel ports on a line card, use the show dmm fp-port command in EXEC mode. show dmm fp-port Syntax Description This command has no arguments or keywords. Defaults None. Command Modes EXEC mode. Command History Release 3.2(1) Modification This command was introduced. Usage Guidelines You must connect to an SSM on your switch to execute DMM show commands. Use the show module command to determine the slot number of an SSM on your switch. Use the attach module slot command to connect to the SSM. Examples The following example displays front panel ports: switch# attach module 3 Attaching to module 3 ... To exit type 'exit', to abort type '$.' Bad terminal type: "ansi". Will assume vt100. module-3# show dmm fp-port Cisco DMM Front Panel Port Map Port Index Mirage Id DPP Id 1 0 1 2 2 1 1 2 3 2 1 2 4 3 1 2 5 4 2 3 6 5 2 3 7 6 2 3 8 7 2 3 9 8 3 6 10 9 3 6 11 10 3 6 12 11 3 6 13 12 4 7 14 13 4 7 15 14 4 7 16 15 4 7 17 16 1 1 18 17 1 1 22-64 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x