HP Cisco MDS 9216i Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1174

show fc-redirect active-configs Chapter 22 Show Commands Send documentation comments to [email protected] show fc-redirect active-configs To display all active configurations on a switch, use the show fc-redirect active-configs command. show fc-redirect active-configs Syntax Description This command has no arguments or keywords. Defaults None. Command Modes EXEC mode. Command History Release 3.2(1) Modification This command was introduced. Usage Guidelines This command is used to verify that there are no active configurations running on the switch during the following operations: • Downgrading from 3.2.1 image (supporting FC-Redirect) to an older image where FC-Redirect is not supported. • Decommissioning a local switch. Note Active configuration implies configurations created by applications running on the current switch or applications created on remote switches for hosts or targets connected to the local switch. Examples The following example displays the active configurations running on the switch: switch# show fc-redirect active-configs Config#1 ========== Appl UUID = 0x00D8 (ISAPI CFGD Service) SSM Slot = 2 SSM Switch WWN = 20:00:00:05:30:00:90:9e (LOCAL) Vt PWWN = 2f:ea:00:05:30:00:71:64 Tgt PWWN = 21:00:00:20:37:38:63:9e (LOCAL) Local Host PWWN = 21:00:00:e0:8B:0d:12:c6 Config#2 ========== Appl UUID = 0x00D8 (ISAPI CFGD Service) SSM Slot = 2 SSM Switch WWN = 20:00:00:05:30:00:90:9e (LOCAL) Vt PWWN = 2f:ea:00:05:30:00:71:65 Tgt PWWN = 21:00:00:20:37:18:67:2c Local Host PWWN = 21:00:00:e0:8B:0d:12:c6 22-106 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x