HP Cisco MDS 9500 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 456

debug sensor Chapter 6 Debug Commands Send documentation comments to [email protected] debug sensor To enable debugging for the sensor manager, use the debug sensor command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug sensor {demux | deque | error | info | init} no debug sensor {demux | deque | error | info | init} Syntax Description demux deque error info init Enables debugging for sensor demux functions. Enables debugging for sensor deque events. Enables debugging for sensor errors. Enables debugging for sensor information. Enables debugging for sensor initialization. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines Use this command to debug sensor manager events and information. Examples The following example displays the system output when the debug sensor info command is issued: switch# debug sensor info Related Commands Command no debug all show environment temperature Description Disables all debugging. Displays current temperature threshold settings and state. 6-110 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x