HP DL160 HP ProLiant Storage Server release notes (5697-7750, November 2008) - Page 8

All-in-One Storage Manager Description If you use a non-ASM tool (such as the Array Configuration Utility, for example) to modify storage settings, you must allow ASM time to recognize those new settings during the discovery process. If you attempt to perform storage operations before the discovery process is complete, ASM will erroneously attempt to perform storage operations such as growing non-existent logical disks. When modifying storage settings outside of ASM, allow enough time for the ASM Workaround discovery process to recognize those new storage settings before performing any other ASM operations. Issue: When attempting to provision storage on ASM, an error message appears Description When attempting to provision storage, an error message indicating that "no storage could be found or created to satisfy the request" may be issued. This error can appear when attempting to provision storage across multiple disk types. Virtual arrays that span multiple disk types cannot be created. When provisioning Workaround storage, the maximum amount of space you can allocate is limited by the largest amount of space available for a single disk type. You cannot completely utilize the space on all of the disks if the disks are of different types. Data Protector Express This section describes issues related to HP StorageWorks Data Protector Express (DPX), a service required to enable data protection features on the HP All-in-One Storage Manager. Note that HP StorageWorks Data Protector Express is not installed on HP ProLiant Storage Servers by default. The following issues apply only to HP ProLiant Storage Servers with DPX installed and enabled. NOTE: Changes made using Data Protector Express are not always reflected in All-in-One Storage Manager. Issue: Data Protector Express Changes made to a backup using Data Protector Express are not always reflected in All-in-One Storage Manager Description If you use Data Protector Express to change the rotation type associated with a backup to Custom rotation, the change is not reflected in All-in-One Storage Manager. Data Protector Express can be used to change the rotation type of a backup to Workaround Custom rotation, however, this change will not be reflected in All-in-One Storage Manager. If you need to use a custom rotation, HP recommends that you continue to use Data Protector Express to make any further changes to the backup. Issue: Data Protector Express may fail to start with "Service not found" error Description When attempting to start Data Protector Express, the following error may be displayed: Code: 59 (0x3b) Message: Service not found Description: The desired service was not found. Either the service is no longer active, or the machine providing the service is unavailable at this time. Storage Server release notes 9