HP Dc7100 Desktop Management Guide - Page 18

MB HP Drive Key

Get HP Dc7100 - Compaq Business Desktop PDF manuals and user guides
UPC - 829160356877
View all HP Dc7100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Desktop Management Guide ❏ 64MB DiskOnKey ❏ 128MB HP Drive Key ❏ 128MB DiskOnKey ❏ 256MB HP Drive Key ❏ 256MB DiskOnKey ■ A bootable DOS diskette with the FDISK and SYS programs. If SYS is not available, FORMAT may be used, but all existing files on the USB flash media device will be lost. 1. Turn off the computer. 2. Insert the USB flash media device into one of the computer's USB ports and remove all other USB storage devices except USB diskette drives. 3. Insert a bootable DOS diskette with FDISK.COM and either SYS.COM or FORMAT.COM into a diskette drive and turn on the computer to boot to the DOS diskette. 4. Run FDISK from the A:\ prompt by typing FDISK and pressing Enter. If prompted, click Yes (Y) to enable large disk support. 5. Enter Choice [5] to display the drives in the system. The USB flash media device will be the drive that closely matches the size of one of the drives listed. It will usually be the last drive in the list. Note the letter of the drive. USB flash media device drive: __________ Ä CAUTION: If a drive does not match the USB flash media device, do not proceed. Data loss can occur. Check all USB ports for additional storage devices. If any are found, remove them, reboot the computer, and proceed from step 4. If none are found, either the system does not support the USB flash media device or the USB flash media device is defective. DO NOT proceed in attempting to make the USB flash media device bootable. 6. Exit FDISK by pressing the Esc key to return to the A:\ prompt. 7. If your bootable DOS diskette contains SYS.COM, go to step 8. Otherwise, go to step 9. 14 www.hp.com Desktop Management Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
14
www.hp.com
Desktop Management Guide
Desktop Management Guide
❏
64MB DiskOnKey
❏
128MB HP Drive Key
❏
128MB DiskOnKey
❏
256MB HP Drive Key
❏
256MB DiskOnKey
■
A bootable DOS diskette with the FDISK and SYS programs. If
SYS is not available, FORMAT may be used, but all existing files
on the USB flash media device will be lost.
1. Turn off the computer.
2. Insert the USB flash media device into one of the computer's
USB ports and remove all other USB storage devices except USB
diskette drives.
3. Insert a bootable DOS diskette with FDISK.COM and either
SYS.COM or FORMAT.COM into a diskette drive and turn on
the computer to boot to the DOS diskette.
4. Run FDISK from the A:\ prompt by typing
FDISK
and pressing
Enter. If prompted, click
Yes
(
Y
) to enable large disk support.
5. Enter Choice [
5
] to display the drives in the system. The USB
flash media device will be the drive that closely matches the size
of one of the drives listed. It will usually be the last drive in the
list. Note the letter of the drive.
USB flash media device drive: __________
Ä
CAUTION:
If a drive does not match the USB flash media device, do
not proceed. Data loss can occur. Check all USB ports for additional
storage devices. If any are found, remove them, reboot the computer, and
proceed from step 4. If none are found, either the system does not support
the USB flash media device or the USB flash media device is defective.
DO NOT proceed in attempting to make the USB flash media device
bootable.
6. Exit FDISK by pressing the
Esc
key to return to the A:\ prompt.
7. If your bootable DOS diskette contains SYS.COM, go to step 8.
Otherwise, go to step 9.